- Sorry, this product cannot be purchased.
Polyurethane Tyre Wheels
Castor Wheels with a Polyurethane Tyre are one of the most popular choice of wheel for casters. The polyurethane is softer than a hard treads like Nylon or Cast Iron while still offering great load ratings and low rolling resistance.Polyurethane tyres are available with Nylon, Aluminium and Cast Iron Centres.
... The softer tyre means it is more elastic and not only will it not damage or mark most flooring,. Furthermore, it can absorb rolling vibrations from the floor which reduces noise and increases user comfort.
Being harder than a soft tread like Rubber, a polyurethane tyre is more resistant to compression and has a lower rolling resistance. Rolling resistance is the force required to keep the wheel in motion at a constant speed when under load.
In heavy duty applications, polyurethane is hard wearing with more abrasion and tear resistance than rubber tyre castor wheels offering 10 times the useful life.
As an alterative to Cast Iron, polyurethane can offer similar load capacity. The added benefit is that they are more gentle on floors. Though the tyre will wear more quickly than Cast Iron, on larger sizes, bonded polyurethane wheels can be retyred. This is generally at a lower cost than the buying a new wheel. Read More
- Display 15 Products per page
-
In StockCastor Wheel 150mm | Polyurethane Tyre / Cast Iron Centre, 730kg, 20mm Ball Bearing (150PT2H)
£89.37150mm Castor Wheel with a Polyurethane Tyre (Revvo... Read Morethane) on a Cast Iron Centre and 20mm Ball Bearings. Load Capacity = 730kg using manual propulsion @ 4km/h. Key Specifications:- Hub Length: 57mm
- Tread Width: 38mm
- Bearing Type: Ball Bearings
- Tyre Hardness: 93 Shore A
- Wear Resistance: Has a life of up to 10 times that of natural rubber under similar conditions and load
- High Load Capacity: Up to 3 times the loading of an equivalent rubber tyre wheel.
- Low Rolling Resistance
- Floor Protection: Shock absorbing, quiet running and will not harm sound floors
- Resistant to Chemicals and Oils: Resistant to a wide range of commonly encountered chemicals and oils such as Mineral Oil, Greases, Hydraulic Fluid, Aliphatic solvents, Petrol, Diesel and cutting oils.
-
In StockCastor Wheel 300mm | Polyurethane Tyre / Cast Iron Centre, 4080kg, 31.8mm Taper Roller (WSU312TM)
£499.95300mm Red Polyurethane Tyre on a Cast Iron Centre ... Read More(Flexello Brand). The wheel has a tread width of 102mm and a 118mm hub length (the distance through the central bore). The central bore contains 31.8mm (1 1/4 inch) Taper Roller Bearings for lower rolling resistance and making the wheel suitable for power towing. The Load Capacity is 4,080Kg.
-
In StockCastor Wheel 200mm | Polyurethane Tyre / Cast Iron Centre, 1045kg, 20mm Roller Bearing (WSU8RBM20)
£88.70200mm Polyurethane Tyre on a Cast Iron Centre (... Read MoreFlexello) with a 20mm Roller Bearing. Load Capacity = 1045kg
The Polyurethane tyre offers a low tractive resistance making it easier to get moving compared with softer rubber tread wheels. It is also a bit softer than hard tread wheels making it smoother and quieter running. The polyurethane tyre is also non-marking and gentle on floors while the roller bearing lowers the rolling resistance to reduce the effort required start the wheel rolling.
-
In StockCastor Wheel 100mm | Polyurethane Tyre / Cast Iron Centre, 350kg, 15mm Ball bearing (KW100PCB40)
Original price was: £41.78.£32.30Current price is: £32.30. Sale!100mm Orange Polyurethane Tyre on a Cast Iron Cent... Read Morere caster wheel with 15mm Ball bearing, 40mm Tread Width and 40mm Hub Length (the distance through the central bore). The load capacity is 350kg using manual propulsion at 4km/h. This wheel has ball bearing in the bore which greatly reduce the wheels rolling resistance and consequently the effort required to start rolling. -
Out of Stock - On the WayDesigner Polyurethane Tyre Wheel 150mm | Polyurethane Tyre / Cast Iron, 900kg, 30mm Plain Bore (15050PT030)
£154.65150mm Polyurethane (Extra Heavy Duty) Tyred / Cast... Read More Iron Centre Wheel with 30mm Plain Bore. This is a high performance wheel using premium grade REVVOTHANE polyurethane which is a high quality tyre with a high load bearing capacity, minimal heat build up and a high abrasion resistance. This wheel is often used in conveyor and transportation systems. The Load capacity quoted is for operation under ideal conditions where the wheel operates infrequently and on a smooth surface. The wheel's load capacity must be reduced as indicated for any of the following conditions. Please note that these are cumulative if more than one condition exists:- Reduce load by 25% if continuous use for more than 45 minutes.
- Reduce Load by further 30% if used as Drive Wheel.
- Reduce load by further 30% if used at speeds greater than 6kp/h.
-
In StockCastor Wheel 150mm | Polyurethane Tyre / Cast Iron Centre, 725kg, 20mm Roller Bearing (WSU6RBM20)
£63.99150mm Polyurethane Tyre on a Cast Iron Centre W... Read Moreheel with a 20mm Roller Bearing (Flexello). Load Capacity = 725kg
The Polyurethane tyre offers a low tractive resistance making it easier to get moving compared with softer rubber tread wheels. It is also a bit softer than hard tread wheels making it smoother and quieter running. The polyurethane tyre is also non-marking and gentle on floors while the roller bearing lowers the rolling resistance to reduce the effort required start the wheel rolling.
-
In StockDesigner Polyurethane Tyre Wheel 100mm | Polyurethane Tyre / Cast Iron, 500kg, 20mm Ball Bearing (10040PT220)
£105.70100mm Polyurethane (Extra Heavy Duty) Tyred / C... Read Moreast Iron Centre Wheel with 20mm Ball Bearing. This is a high performance wheel using premium grade REVVOTHANE polyurethane which is a high quality tyre with a high load bearing capacity, minimal heat build up and a high abrasion resistance. This wheel is often used in conveyor and transportation systems.
The Load capacity quoted is for operation under ideal conditions where the wheel operates infrequently and on a smooth surface. The wheel's load capacity must be reduced as indicated for any of the following conditions. Please note that these are cumulative if more than one condition exists:
- Reduce load by 25% if continuous use for more than 45 minutes.
- Reduce Load by further 30% if used as Drive Wheel.
- Reduce load by further 30% if used at speeds greater than 6kp/h.
-
In StockCastor Wheel 125mm | Polyurethane Tyre / Cast Iron Centre, 350kg, 12mm Plain Bore (125PT04)
£33.68125mm Polyurethane Tyre on a Cast Iron Centre Whee... Read Morel. This wheel has a 32mm Tread Width, 45mm hub length (distance through the central bore) with a 12mm Smooth Plain Bore. Load Capacity = 350Kg -
In StockDesigner Polyurethane Tyre Wheel 200mm | Polyurethane Tyre / Cast Iron, 1300kg, 35mm Plain Bore Keywayed (20060PTU35)
£176.32200mm Polyurethane (Extra Heavy Duty) Tyred / C... Read Moreast Iron Centre Wheel with 35mm Keywayed Plain Bore. This is a high performance wheel using premium grade REVVOTHANE polyurethane which is a high quality tyre with a high load bearing capacity, minimal heat build up and a high abrasion resistance. This wheel is often used in conveyor and transportation systems.
The Load capacity quoted is for operation under ideal conditions where the wheel operates infrequently and on a smooth surface. The wheel's load capacity must be reduced as indicated for any of the following conditions. Please note that these are cumulative if more than one condition exists:
- Reduce load by 25% if continuous use for more than 45 minutes.
- Reduce Load by further 30% if used as Drive Wheel.
- Reduce load by further 30% if used at speeds greater than 6kp/h.
-
In StockDesigner Polyurethane Tyre Wheel 150mm | Polyurethane Tyre / Cast Iron, 900kg, 25mm Plain Bore (15050PT025)
£106.15150mm Polyurethane (Extra Heavy Duty) Tyre on a Ca... Read Morest Iron Centre Wheel with 25mm Smooth Plain Bore. This is a high performance wheel using premium grade REVVOTHANE polyurethane which is a high quality tyre with a high load bearing capacity, minimal heat build up and a high abrasion resistance. This wheel is often used in conveyor and transportation systems. The Load capacity quoted is for operation under ideal conditions where the wheel operates infrequently and on a smooth surface. The wheel's load capacity must be reduced as indicated for any of the following conditions. Please note that these are cumulative if more than one condition exists:- Reduce load by 25% if continuous use for more than 45 minutes.
- Reduce Load by further 30% if used as Drive Wheel.
- Reduce load by further 30% if used at speeds greater than 6kp/h.
-
In StockCastor Wheel 160mm | Polyurethane Tyre / Aluminium Centre, 600kg, 20mm Ball bearing (AW160PAB)
£32.97160mm Castor Wheel with a Polyurethane Tyre (Shore... Read More A 94) on an Aluminium Centre with 20mm Ball bearings. Load Capacity = 600kg using manual propulsion at 4km/h. Key Specifications:- Tread Width: 50mm
- Hub Length: 60mm (the distance through the central bore)
- Bearing Type: 20mm Ball Bearing
- Tyre Hardness: Shore A 94
- High Load Capacity
- Low Rolling Resistance
- High Wear Resistance
- Low Noise Operation
-
In StockCastor Wheel 150mm | Polyurethane Tyre / Cast Iron Centre, 730kg, 20mm Roller Bearing (150PT15)
£62.74150mm Polyurethane Tyre on a Cast Iron Centre Whee... Read Morel (Revvo) with a 20mm Roller Bearing, 38mm Tread Width, 60mm Hub (the distance through the central bore) and a 92-97 shore A hardness. This castor wheel's Load Capacity is 730kg using manual propulsion and 4 km/h. Polyurethane tyres have a very high tear and abrasion resistance providing up to 10 times the life of natural rubber when used under similar conditions and loads. Furthermore, they have approximately 30% less rolling resistance compared with comparable rubber tyre wheels making them easier to move. -
In StockDesigner Polyurethane Tyre Wheel 100mm | Polyurethane Tyre / Cast Iron, 500kg, 20mm Plain Bore (10040PT020)
£61.50100mm Polyurethane (Extra Heavy Duty) Tyred / C... Read Moreast Iron Centre Wheel with 20mm Plain Bore. This is a high performance wheel using premium grade REVVOTHANE polyurethane which is a high quality tyre with a high load bearing capacity, minimal heat build up and a high abrasion resistance. This wheel is often used in conveyor and transportation systems.
The Load capacity quoted is for operation under ideal conditions where the wheel operates infrequently and on a smooth surface. The wheel's load capacity must be reduced as indicated for any of the following conditions. Please note that these are cumulative if more than one condition exists:
- Reduce load by 25% if continuous use for more than 45 minutes.
- Reduce Load by further 30% if used as Drive Wheel.
- Reduce load by further 30% if used at speeds greater than 6kp/h.
-
In StockCastor Wheel 125mm | Polyurethane Tyre / Nylon Centre, 300kg, 15mm Roller Bearing (WPN5RBM15)
£20.17125mm Polyurethane Tyred / Nylon Centre Wheel (Whe... Read Moreel - Resilient Tread) with 15mm Roller Bearing. Load Capacity = 300kg -
In StockCastor Wheel 75mm | Polyurethane Tyre / Cast Iron Centre, 300kg, 12mm Plain Bore (07535PT012)
£43.9275mm Polyurethane (Premium Grade REVVOTHANE) Tyre ... Read Moreon a Cast Iron Centre Wheel running on 12mm smooth plain bore. This is high performance industrial wheel and the stated load capacity of 300kg is based on the wheel being manually propelled at 4 km/h (walking speed). As a high performance wheel it can be used in more demanding applications than a standard polyurethane tyre castor wheel could be: As with all polyurethane tyre wheels, extended periods of use or speeds greater 4 km/h will result in surface friction. This friction generates heat that builds up in the polyurethane that will cause a standard polyurethane tyre to de-bond from the cast iron. REVVOTHANE is a very high quality polyurethane that offers minimal heat build up and performs exceptionally well within the following guidelines:- If the wheel be in continual use for more than 45 minutes, this reduces the load capacity by 25%.
- The load capacity is reduced by a further 30% if used as Drive Wheel
- Reduce load by further 20% if the running speed is between 6 km/h and 10 km/h
- Reduce the load by a further 30% if the running speed is between 10 km/h and 16 km/h
