- Sorry, this product cannot be purchased.

Polyurethane Tyre Wheels
Castor Wheels with a Polyurethane Tyre are one of the most popular choice of wheel for casters. The polyurethane is softer than a hard treads like Nylon or Cast Iron while still offering great load ratings and low rolling resistance.Polyurethane tyres are available with Nylon, Aluminium and Cast Iron Centres.
... The softer tyre means it is more elastic and not only will it not damage or mark most flooring,. Furthermore, it can absorb rolling vibrations from the floor which reduces noise and increases user comfort.
Being harder than a soft tread like Rubber, a polyurethane tyre is more resistant to compression and has a lower rolling resistance. Rolling resistance is the force required to keep the wheel in motion at a constant speed when under load.
In heavy duty applications, polyurethane is hard wearing with more abrasion and tear resistance than rubber tyre castor wheels offering 10 times the useful life.
As an alterative to Cast Iron, polyurethane can offer similar load capacity. The added benefit is that they are more gentle on floors. Though the tyre will wear more quickly than Cast Iron, on larger sizes, bonded polyurethane wheels can be retyred. This is generally at a lower cost than the buying a new wheel. Read More
- Display 15 Products per page
-
Out of Stock - On the Way
Designer Polyurethane Tyre Wheel 150mm | Polyurethane Tyre / Cast Iron, 700kg, 20mm Plain Bore (15035PT020)
150mm Polyurethane (Premium Grade REVVOTHANE) T... Read Moreyred / Cast Iron Centre Wheel with 20mm Plain Bore. This is a high performance wheel using premium grade REVVOTHANE polyurethane which is a high quality tyre with a high load bearing capacity, minimal heat build up and a high abrasion resistance. This wheel is often used in conveyor and transportation systems.
The Load capacity quoted is for operation under ideal conditions where the wheel operates infrequently and on a smooth surface. The wheel's load capacity must be reduced as indicated for any of the following conditions. Please note that these are cumulative if more than one condition exists:
- Reduce load by 25% if continuous use for more than 45 minutes.
- Reduce Load by further 30% if used as Drive Wheel.
- Reduce load by further 30% if used at speeds greater than 6kp/h.
-
In Stock
Crown Tread Castor Wheel 100mm | Polyurethane Tyre / Cast Iron Centre, 350kg, 20mm Ball bearing (CR10020241)
100mm Crown Tread Polyurethane / Cast Iron Wheel w... Read Moreith 20mm Ball Bearing. Load Capacity = 350kg -
In Stock
Castor Wheel 125mm | Polyurethane Tyre / Nylon, 180kg, 12mm Plain Bore (125NT04)
125mm Maroon coloured Polyurethane Tyre Castor Whe... Read Moreel with a White Nylon Centre, 35mm Tread Width, 12mm Smooth Plain Bore and 45mm Hub Length. The load capacity of this wheel is 180kg using manual propulsion at 4km/h. -
In Stock
Castor Wheel 125mm | Polyurethane Tyre / Nylon Centre, 250kg, 12mm Roller Bearing (KW125PN1244RB)
125mm Polyurethane Tyred / Nylon Centre Wheel with... Read More 12mm Roller Bearing. Load capacity = 250kg -
In Stock
Designer Polyurethane Tyre Wheel 125mm | Polyurethane Tyre / Cast Iron, 600kg, 25mm Ball Bearing (12545PT225)
125mm Polyurethane (Extra Heavy Duty) Tyred / C... Read Moreast Iron Centre Wheel with 25mm Ball Bearing. This is a high performance wheel using premium grade REVVOTHANE polyurethane which is a high quality tyre with a high load bearing capacity, minimal heat build up and a high abrasion resistance. This wheel is often used in conveyor and transportation systems.
The Load capacity quoted is for operation under ideal conditions where the wheel operates infrequently and on a smooth surface. The wheel's load capacity must be reduced as indicated for any of the following conditions. Please note that these are cumulative if more than one condition exists:
- Reduce load by 25% if continuous use for more than 45 minutes.
- Reduce Load by further 30% if used as Drive Wheel.
- Reduce load by further 30% if used at speeds greater than 6kp/h.
-
In Stock
Castor Wheel 150mm | Polyurethane Tyre / Cast Iron Centre, 730kg, 20mm Ball Bearing (150PT2H)
150mm Castor Wheel with a Polyurethane Tyre (Revvo... Read Morethane) on a Cast Iron Centre and 20mm Ball Bearings. Load Capacity = 730kg using manual propulsion @ 4km/h. Key Specifications:- Hub Length: 57mm
- Tread Width: 38mm
- Bearing Type: Ball Bearings
- Tyre Hardness: 93 Shore A
- Wear Resistance: Has a life of up to 10 times that of natural rubber under similar conditions and load
- High Load Capacity: Up to 3 times the loading of an equivalent rubber tyre wheel.
- Low Rolling Resistance
- Floor Protection: Shock absorbing, quiet running and will not harm sound floors
- Resistant to Chemicals and Oils: Resistant to a wide range of commonly encountered chemicals and oils such as Mineral Oil, Greases, Hydraulic Fluid, Aliphatic solvents, Petrol, Diesel and cutting oils.
-
Out of Stock - On the Way
Designer Polyurethane Tyre Wheel 150mm | Polyurethane Tyre / Cast Iron, 900kg, 30mm Plain Bore (15050PT030)
150mm Polyurethane (Extra Heavy Duty) Tyred / Cast... Read More Iron Centre Wheel with 30mm Plain Bore. This is a high performance wheel using premium grade REVVOTHANE polyurethane which is a high quality tyre with a high load bearing capacity, minimal heat build up and a high abrasion resistance. This wheel is often used in conveyor and transportation systems. The Load capacity quoted is for operation under ideal conditions where the wheel operates infrequently and on a smooth surface. The wheel's load capacity must be reduced as indicated for any of the following conditions. Please note that these are cumulative if more than one condition exists:- Reduce load by 25% if continuous use for more than 45 minutes.
- Reduce Load by further 30% if used as Drive Wheel.
- Reduce load by further 30% if used at speeds greater than 6kp/h.
-
In Stock
Castor Wheel 200mm | Polyurethane Tyre / Cast Iron Centre, 1800kg, 25.4mm Taper Roller (200PTTC)
200mm Polyurethane Tyre on a Cast Iron Centre W... Read Moreheel (Revvo Wheel) with 25.4mm (1 Inch) Taper Roller Bearing, 75mm Tread Width and 89mm Hub Length (the distance through the central bore). Load Capacity = 1800kg
This polyurethane tyre has a high tear strength, exceptional abrasion resistance and a useful life of up to 10 times that of equivalent rubber tyres under similar conditions and loads.
-
In Stock
Castor Wheel 150mm | Polyurethane Tyre / Cast Iron Centre, 730kg, 20mm Roller Bearing (150PT15)
150mm Polyurethane Tyre on a Cast Iron Centre Whee... Read Morel (Revvo) with a 20mm Roller Bearing, 38mm Tread Width, 60mm Hub (the distance through the central bore) and a 92-97 shore A hardness. This castor wheel's Load Capacity is 730kg using manual propulsion and 4 km/h. Polyurethane tyres have a very high tear and abrasion resistance providing up to 10 times the life of natural rubber when used under similar conditions and loads. Furthermore, they have approximately 30% less rolling resistance compared with comparable rubber tyre wheels making them easier to move. -
In Stock
Designer Polyurethane Tyre Wheel 125mm | Polyurethane Tyre / Cast Iron, 600kg, 25mm Plain Bore (12545PT025)
125mm Polyurethane (Extra Heavy Duty) Tyred / C... Read Moreast Iron Centre Wheel with 25mm Plain Bore. This is a high performance wheel using premium grade REVVOTHANE polyurethane which is a high quality tyre with a high load bearing capacity, minimal heat build up and a high abrasion resistance. This wheel is often used in conveyor and transportation systems.
The Load capacity quoted is for operation under ideal conditions where the wheel operates infrequently and on a smooth surface. The wheel's load capacity must be reduced as indicated for any of the following conditions. Please note that these are cumulative if more than one condition exists:
- Reduce load by 25% if continuous use for more than 45 minutes.
- Reduce Load by further 30% if used as Drive Wheel.
- Reduce load by further 30% if used at speeds greater than 6kp/h.
-
In Stock
Castor Wheel 125mm | Polyurethane Tyre / Cast Iron Centre, 325kg, 15mm Roller Bearing (WSU5RBM15)
125mm Polyurethane Tyre on a Cast Iron Centre w... Read Moreheel (Flexello) with 35mm Tread Width and 15mm Roller Bearing. Load Capacity = 325kg
The Polyurethane tyre offers a low tractive resistance making it easier to get moving compared with softer rubber tread wheels. It is also a bit softer than hard tread wheels making it smoother and quieter running. The polyurethane tyre is also non-marking and gentle on floors while the roller bearing lowers the rolling resistance to reduce the effort required start the wheel rolling.
-
Out of Stock - On the Way
Castor Wheel 150mm | Polyurethane Tyre / Cast Iron Centre, 650kg, 20mm Ball bearing (AW150PCB50)
150mm Caster Wheel with a Yellow Polyurethane Tyre... Read More (91 Shore A) on a Cast Iron Centre. It has two quality 20mm Shielded Ball bearings, a 50mm hub length and a Load Capacity of 650kg. This castor wheel has a high load rating for heavy duty applications yet gentle on concrete flooring. The polyurethane used on this wheel has a low rolling resistance, excellent elasticity and is resistant to compression and abrasions. -
In Stock
Castor Wheel 80mm | Polyurethane Tyre / Cast Iron Centre, 250kg, 15mm Ball bearing (KW080PCB)
80mm Polyurethane Tyre on a Cast Iron Centre Wheel... Read More with 15mm Ball bearings, 36mm Tread Width and 36mm Hub Length (the distance through the bore). Load Capacity = 250kg -
In Stock
Castor Wheel 200mm | Polyurethane Tyre / Cast Iron Centre, 1100kg, 20mm Ball bearing (AW200PCB)
200mm Polyurethane Tyre on a Cast Iron Centre whee... Read Morel with 50mm Tread Width, 60mm Hub Length (distance through the central hole) and 20mm Ball bearings. Load Capacity = 1100kg -
In Stock
Designer Polyurethane Tyre Wheel 200mm | Polyurethane Tyre / Cast Iron, 1000kg, 25mm Plain Bore Keywayed (20040PTU25)
200mm Polyurethane (Extra Heavy Duty) Tyre on a... Read More Cast Iron Centre Wheel with 40mm Tread Width, 25mm Keyway Plain Bore and 50mm Hub Length.
This is a high performance wheel using premium grade REVVOTHANE polyurethane which is a high quality tyre with a high load bearing capacity, minimal heat build up and a high abrasion resistance. This wheel is often used in conveyor and transportation systems.
The Load capacity quoted is for operation under ideal conditions where the wheel operates infrequently and on a smooth surface. The wheel's load capacity must be reduced as indicated for any of the following conditions. Please note that these are cumulative if more than one condition exists:
- Reduce load by 25% if continuous use for more than 45 minutes.
- Reduce Load by further 30% if used as Drive Wheel.
- Reduce load by further 30% if used at speeds greater than 6kp/h.