- Display 15 Products per page
In StockCastor Wheel 160mm | Blue Rubber Tyre / Nylon Centre, 350kg, 20mm Ball bearing (AW160RNBJBLUE)
£25.64160mm Blue Elastic Rubber Tyre wheel on a Nylon... Read More Centre Wheel with 20mm Ball Bearing. The load capacity of this castor wheel is 350kg under manual propulsion at a speed of 4 km/h (walking speed)
The Blue Elastic Rubber offers a higher load capacity over standard grey or black rubber tyres and will not mark floors.
The wheel is fitted with a roller bearing that lowers rolling resistance and is a great choice where you need a softer yet resilient wheel that will not mark or damage floors.
- In Stock
Designer Polyurethane Tyre Wheel 150mm | Polyurethane Tyre / Cast Iron, 900kg, 25mm Ball Bearing (15050PT225)
£131.95150mm Polyurethane (Extra Heavy Duty) Tyred / C... Read Moreast Iron Centre Wheel with 25mm Ball Bearing. This is a high performance wheel using premium grade REVVOTHANE polyurethane which is a high quality tyre with a high load bearing capacity, minimal heat build up and a high abrasion resistance. This wheel is often used in conveyor and transportation systems.
The Load capacity quoted is for operation under ideal conditions where the wheel operates infrequently and on a smooth surface. The wheel's load capacity must be reduced as indicated for any of the following conditions. Please note that these are cumulative if more than one condition exists:
- Reduce load by 25% if continuous use for more than 45 minutes.
- Reduce Load by further 30% if used as Drive Wheel.
- Reduce load by further 30% if used at speeds greater than 6kp/h.
- In Stock
Puncture Proof Wheel 400mm | Puncture Proof Tyre / Red Polypropylene Centre, 200kg, 25.4mm Roller Bearing (PP400RPB1D)
£75.16400mm Puncture Proof Wheel (Micro-Cellular Polyure... Read Morethane) with a Block Tread on a Red Polypropylene Centre. This size wheel is often referred to as a 16" or 16 Inch Wheel and has a 25.4mm (1" or 1 Inch) Roller Bearing, 100mm Tread Width, 63mm Hub Length, and 200kg Load Capacity - In Stock
125mm Swivel and Brake Castor, 150kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (MSVH125PN1BSWB)
£12.51125mm Single Bolt Hole (12mm) Swivel Castor with S... Read Morewivel and Wheel Brake (Pressed Steel). Red Polyrethane Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 150kg - In Stock
160mm Swivel Castor, 500kg Capacity | Nylon Wheel, Plain Bore (MSK160NY)
£21.52160mm Top Plate Swivel Castor (Pressed Steel) with... Read More 105x80mm Fixing Bolt Hole Centres. Nylon Wheel with a Smooth Plain Bore. Load Capacity = 500kg. - In Stock
100mm White Nylon Wheel, 20mm Plain Bore, 150kg (MVW100NY0B)
£6.65100mm Nylon Castor Wheel with 20mm Smooth Plain Bo... Read Morere, 36mm Tread Width and 40mm Hub Length (the distance through the central bore). The load Load Capacity is 150kg. - In Stock
Pallet Roller, 82mm X 70mm, Polyurethane Tyre, Without Bearing (47x14mm Bearing Seat), 600kg (KR8270PT)
£19.3582mm X 70mm Pallet Roller with a polyurethane tyre... Read More (92 Shore A Hardness) on a steel centre. This roller is sold without bearings and has a 47mm x 14mm bearing seat. The Load Capacity is 600kg (working speed 4 km/h).This pallet roller is abrasion resistant with a low rolling resistance. - In Stock
200mm Fixed Castor, 535kg Capacity | Rubber Tyre Wheel, Roller Bearing (TFH200RU15)
£68.12200mm Heavy Duty Top Plate Fixed Castor (Fabric... Read Moreated Castor) with 105x80 Hole Centres. Rubber Tyre / Cast Iron Centre Wheel with Roller Bearing. Load Capacity = 535kg
Features of the H Series Castor
- The Genuine Revvo H Series castor is made from heavy gauge forged steel
- The side plates are press formed to a cylindrical shape to give the best strength to weight ratio
- In Stock
Guide Roller, 50mm X 20mm, Polyurethane Tyre, 12mm Ball Bearing, 60kg (KGR5020PTB12)
£13.2950mm Guide Roller with a 20mm Tread Width with a s... Read Moreingle 12mm shielded ball bearing (6201ZZ). The guide wheel's tyre is polyurethane (92 Shore A Hardness) with a Load Capacity of 60kg. - In Stock
125mm Swivel Castor, 160kg Capacity | Polypropylene Wheel, Plain Bore (LSV125PP)
£7.93125mm top Plate Swivel Castor with a White Polypro... Read Morepylene wheel. It has 80x60mm bolt hole centres and a load capacity of 160kg using manual propulsion at 4km/hThis is one of our most popular castors and the White Polypropylene wheel is non-marking and won’t damage concrete floors. Because it is a hard tread it has the lowest rolling and swivelling resistance. It is ideal as a new component or a replacement caster for most general purpose domestic or industrial castor where the travel speed of the castor generally does not exceed walking speed. - In Stock
160mm Swivel Castor with Brake, 300kg Capacity | Rubber Tyre Wheel, Ball Bearing (MSV160RN2BSWB)
£32.09160mm Top Plate Swivel Castor with Swivel &... Read More; Wheel Brake (Pressed Steel) with 105x80 Hole Centres. Rubber Tyre / Nylon Centre Wheel with ball bearing. Load Capacity = 300kg - In Stock
80mm Swivel Castor, 130kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (MSV080PN1B)
£7.7080mm Red Polyurethane Tyre on a Nylon Centre Wh... Read Moreeel with a roller bearing fitted into a pressed steel swivel castor bracket. The Swivel Bracket has a 4 hole top plate with 80x60mm bolt hole spacing. The load capacity of this castor is 130kg using manual propulsion at 4km/h (walking speed)
The Polyurethane tyre offers a low tractive resistance making it easier to get moving compared with softer rubber tread wheels. However, Polyurethane tyres are slightly softer than hard tread wheels making the castor smoother and quieter running. The polyurethane tyre is also non-marking and gentle on floors while the roller bearing lowers the rolling resistance to reduce the effort required to move the castors. Put this wheel into a strong bracket that has a double ball race in the swivel head and you have a castor that is a great choice for the wide range of industrial and domestic applications.
- In Stock
Puncture Proof Wheel 400mm | Puncture Proof Tyre / Red Polypropylene Centre, 200kg, 25mm Plain Bore (PP400RP25D)
£76.97400mm Puncture Proof Wheel (Micro-Cellular Polyure... Read Morethane) with a Block Tread on a Red Polypropylene Centre. This size wheel is often referred to as a 16" or 16 Inch Wheel and has a 25mm Plain Bore, 100mm Tread Width, 66mm Hub Length, and 200kg Load Capacity - In Stock
V Grooved Wheel 100mm | V Grooved Cast Iron, 300kg, 20mm Roller Bearing (100CV1H)
£36.76100mm Revvo Cast Iron V Groove Wheel with 20mm Rol... Read Moreler Bearing. This wheel has 46mm Tread Width, 25mm Flange Groove with 92 degree angle, 60mm Hub Length (distance through the central bore) and a load capacity of 300kg.Revvo Cast Iron wheels are manufactured from premium close grained casting of grey iron material which is sometimes described as 'semi-steel' to BSEN1561, This wheel combines strength and shock resistance with long life and economy. - In Stock
200mm Fixed Castor, 1400kg Capacity | Polyurethane Tyre Wheel, ball Bearing (2HKF20020241)
£176.09200mm Heavy Duty Top Plate Fixed Castor (Fabricate... Read Mored Castor - Twin Wheel). The Top Plate measures 175x150mm with 105x80mm Fixing Hole Centres. The load capacity of this dual wheel castor is 1400kg.The Wheel has a Polyurethane Tyre (92 Shore A) on a Cast Iron Centre Wheel with Ball Bearings. The polyurethane tyre is abrasion resistant with a low rolling resistance. The elasticity of the polyurethane allows the wheel absorb some of the rolling vibrations. This provides the user with a smoother and quieter operation yet is gentler on concrete floors compared to hard treads such as Cast Iron.
