- Sorry, this product cannot be purchased.
- Display 15 Products per page
-
In Stock150mm Swivel Castor, 300kg Capacity | Rubber Tyre Wheel, Plain Bore (661RN)
£41.06150mm Top Plate Swivel Castor (Pressed Steel) with... Read More 140x105 Hole Centres. Rubber Tyre / Nylon Centre Wheel with Plain Bore. Load Capacity = 300kg -
In StockCastor Wheel 150mm | Polyurethane Tyre / Cast Iron Centre, 730kg, 20mm Ball Bearing (150PT2H)
£89.37150mm Castor Wheel with a Polyurethane Tyre (Revvo... Read Morethane) on a Cast Iron Centre and 20mm Ball Bearings. Load Capacity = 730kg using manual propulsion @ 4km/h. Key Specifications:- Hub Length: 57mm
- Tread Width: 38mm
- Bearing Type: Ball Bearings
- Tyre Hardness: 93 Shore A
- Wear Resistance: Has a life of up to 10 times that of natural rubber under similar conditions and load
- High Load Capacity: Up to 3 times the loading of an equivalent rubber tyre wheel.
- Low Rolling Resistance
- Floor Protection: Shock absorbing, quiet running and will not harm sound floors
- Resistant to Chemicals and Oils: Resistant to a wide range of commonly encountered chemicals and oils such as Mineral Oil, Greases, Hydraulic Fluid, Aliphatic solvents, Petrol, Diesel and cutting oils.
-
In Stock125mm Swivel Castor, 300kg Capacity | Polyurethane Tyre Wheel, Plain Bore (561PN)
£30.94125mm Top Plate Swivel Castor (Pressed Steel) with... Read More 140x105 Hole Centres. Polyurethane Tyre / Nylon Centre Wheel with Plain Bore. Load Capacity = 300kg -
In StockPneumatic Wheel 220mm | Pneumatic Tyre / Red Polypropylene Centre, 100kg, 25.4mm Roller Bearing (PWP220RB1)
£20.72220mm Black Pneumatic Rubber Tyre / Red Polypropyl... Read Moreene Centre Wheel (2.50-4). This small pneumatic castor wheel has a 4 Ply rating tyre with LUG tread, 73mm Hub Length and 25.4mm (1 inch) Roller Bearing. Load Capacity = 100kg. Pneumatic Wheels are rubber tyres that are inflated with air. They are used in either a castor frame or mobile handling equipment such as garden trolleys, carts, sack trucks and other transport equipment. Being a very soft tyre they exceptionally kind on floors and provide great operator comfort. Pneumatic castor wheels have a bit of bounce which lowers the rolling resistance on uneven surfaces. Therefore, they protect the transportation unit from much of the impacts from bumpy surfaces. -
In Stock80mm Stainless Steel Swivel Castor, 120kg Capacity | Rubber Tyre Wheel, Roller Bearing (MSS080RNB)
£20.2880mm Top Plate Swivel Castor (Stainless Steel Cast... Read Moreor) with 80x60 Hole Centres. Blue Rubber Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 120kg -
In Stock200mm Swivel Castor (Powder Coated), 900kg Capacity | Polyurethane Tyre Wheel (KGHP200ASFMUD)
Original price was: £171.85.£99.62Current price is: £99.62. Sale!200mm Heavy-duty Swivel Castor with a Powder Coate... Read Mored Pressed Steel Bracket and a 250mm overall height. The caster wheel has a Blue Polyurethane Tyre (Shore A 95) on an Aluminium Centre with Ball Bearings Features:- 900kg Load Capacity: For the most demanding applications and heavy-duty loads.
- Silver/Grey Powder Coating: Making this the best looking heavy-duty industrial castor on the market. The powder-coating not only looks great but also provides corrosion protection which prolongs its optimal performance and keeps the castor looking good.
- Quality Ball Bearings: For the lowest rolling resistance to reduce the effort needed to move.
- Double Ball Bearing Race and hardened bearing Seats in the swivel head: For an optimum swivel rotation function and durability.
- Strong Pressed Steel Plate: The top plate measure 140x110mm with fixing bolt holes slotted to 105x80/75mm to suit 10mm bolts
- Precision Engineered: These castors have an incredibly smooth swivelling function with no "rock" to the swivel head and no sideways movement on the wheel for exceptional operating performance.
-
In StockCastor Wheel 200mm | Polyurethane Tyre / Cast Iron Centre, 1800kg, 25mm Ball Bearing (200PT2P)
£195.35200mm Polyurethane Tyre on a Cast Iron Centre W... Read Moreheel With 25mm Ball Bearing. This wheel has a relatively wide 75mm Tread Width and 83mm Hub Length (distance through the central bore) and can be power towed, The Load Capacity of this castor wheel is 1800kg at towing speeds of 6km/h.
This polyurethane tyre has a high tear strength, exceptional abrasion resistance and a useful life of up to 10 times that of equivalent rubber tyres under similar conditions and loads.
-
In StockDesigner Polyurethane Tyre Wheel 150mm | Polyurethane Tyre / Cast Iron, 900kg, 25mm Plain Bore (15050PT025)
£106.15150mm Polyurethane (Extra Heavy Duty) Tyre on a Ca... Read Morest Iron Centre Wheel with 25mm Smooth Plain Bore. This is a high performance wheel using premium grade REVVOTHANE polyurethane which is a high quality tyre with a high load bearing capacity, minimal heat build up and a high abrasion resistance. This wheel is often used in conveyor and transportation systems. The Load capacity quoted is for operation under ideal conditions where the wheel operates infrequently and on a smooth surface. The wheel's load capacity must be reduced as indicated for any of the following conditions. Please note that these are cumulative if more than one condition exists:- Reduce load by 25% if continuous use for more than 45 minutes.
- Reduce Load by further 30% if used as Drive Wheel.
- Reduce load by further 30% if used at speeds greater than 6kp/h.
-
In Stock125mm Fixed Castor, 160kg Capacity | Polypropylene Wheel, Plain Bore (LFV125PP)
£7.30125mm top Plate Fixed Castor with a White Polyprop... Read Moreylene wheel. It has 80x60mm bolt hole centres and a load capacity of 160kg using manual propulsion at 4km/h This is one of our most popular castors and the White Polypropylene wheel is non-marking and won’t damage concrete floors. Because it is a hard tread it has the lowest rolling and swivelling resistance. It is ideal as a new component or a replacement caster for most general purpose domestic or industrial castor where the travel speed of the castor generally does not exceed walking speed. -
In Stock100mm Fixed Castor, 225kg Capacity | Nylon Wheel, Plain Bore (TF4100NY04)
£12.04100mm Fixed Castor (REVVO Brand) with a White Nylo... Read Moren Wheel. The top plate measures 145mm x 110mm and the Fixing Bolt Hole Centres are 105x80mm. The castor wheel has a 35mm Tread Width with a Smooth Plain Bore and the Load Capacity is 225kg using manual propulsion at 4km/h (walking speed). The white nylon wheel is a hard tread which provides the lowest rolling resistance and maximum mobility. Being nylon the wheel is non-marking and will not damage concrete floors.
-
In Stock200mm Fixed Castor, 400kg Capacity | Rubber Tyre Wheel, Ball bearing (MFK200EA2B)
£43.26200mm Top Plate Fixed Castor (Pressed Steel) with ... Read More105x80mm Bolt Hole Centres. Black Elastic Rubber Tyre / Aluminium Centre Wheel with Ball Bearing. Load Capacity = 400kg -
In Stock150mm Swivel Castor, 500kg Capacity | Polyurethane Tyre Wheel, Ball bearing (KS150PCB500)
£66.66150mm Top Plate Swivel Castor (Extra Heavy Pressed... Read More Steel Castor) with 105x80mm Hole Centres. Polyurethane Tyre / Cast Iron Centre Wheel with Ball Bearing. Load Capacity = 500kg -
Out of Stock - On the Way250mm Swivel Castor, 1500kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (KS250PCB1500A)
£231.00250mm Top Plate Swivel Castor (Industrial Castor) ... Read Morewith 160x120 Hole Centres. Polyurethane Tyre / Cast Iron Centre Wheel with Ball Bearing. Load Capacity = 1500kg -
In Stock100mm Swivel Castor with Brake, 150kg Capacity | Nylon Wheel, Roller Bearing (MSV100NY1BSWB)
£9.85100mm White Nylon Wheel with a roller bearing fitt... Read Moreed into a pressed steel swivel and brake castor bracket. The Swivel Brake Bracket has a 4 hole top plate with 80x60mm bolt hole spacing. The load capacity of this castor is 150kg using manual propulsion at 4km/h (walking speed) The Nylon Wheel has a low tractive resistance making it easier to get moving compared with softer rubber tread wheels. Together with the strength of nylon and because it wont damage concrete floors, makes nylon wheel castors probably the most popular choice. The roller bearing lowers the rolling resistance to reduce the effort required to move the castors. Put this wheel into a strong bracket that has a double ball race in the swivel head makes this castor a great choice for the widest range of industrial and domestic applications. -
In Stock50mm Stainless Steel Footmaster Levelling Castor, 280kg Capacity | Nylon Wheel, Plain Bore (KSGDN-60S)
Original price was: £140.79.£98.56Current price is: £98.56. Sale!50mm Footmaster castor with Stainless forged steel... Read More plate and stainless casting frame, M12 x 18mm Threaded Stem Fitting. 280kg Static and 140kg Dynamic Load Capacity with Machine Cast Nylon Wheel and Vibration Damping Rubber Pad. Nylon Handwheel height adjustment Operation. This footmaster castor has an overall height of 82mm when the wheel is engaged with a total lift of 15mm using the rubber footpad. The version of the Footmaster Levelling castor has a double ball bearing with hardened stainless steel bearings in the swivel head. The KSGDN Footmaster castor has completely corrosion-resistant components applied. The Footmaster levelling castor is a multi-functional swivel castor that provides mobility, levelling and anti-vibration functions. This allows users to move and position large equipment into place. Because of the lifting and lowering function of the Footmaster castor, like regular Jacking Castors, it is important understand that each castor may be subjected to HALF THE TOTAL WEIGHT. Therefore, the recommended load for each Footmaster Castor is half the castor's Static Load Capacity of when the castor is stationary and the foot-pads are lowered. This load capacity of the Footmaster Castor when being moved and positioned is given by the Dynamic Load Capacity.
