Swivel Castors
Swivel Castors and wheels can swivel 360 degrees about the vertical axis (see figure below). They consist of a housing and a caster wheel. The housing itself is made up of a plate fitting, swivel bearings and a yoke. The Yoke is often referred to as the castor's frame (see figure below).The plate fitting determines how the... castor is going to be attached to the equipment. It is usually either a single bolt hole fitting or a plate fixing which is generally square, rectangular or triangular. Plate fittings are usually bolted to equipment so knowing your required bolt hole centres is important. The Swivel Head consists of a ball race and a number of ball bearings that roll within it. Swivel Castors can either have a single ball race or a double ball race. They perform the same function. The double ball race was developed for medium and heavy applications. This is because they are compact, perform well under static and dynamic loads and provide excellent steerability.
Swivel castors can be fitting with locks which lock (brake) wither the wheel or the swivel head or both. See Brake Castors.
Swivel Castor Components
Swivel Castor Offset
The Swivel Castor's offset it the distance from the swivel axis to the centre of the wheel (where it is secured to the castor frame). It is the reason a swivel castor will go in the direction you want it to go regardless its starting direction. The offset and castor wheel's diameter make up the swivel radius where the swivel radius = Offset + (Wheel Diameter / 2).
This is the radius of circle described but the outer dimension of the wheel swivelling around the vertical axis. Basically, this is important because it tells you how much room is needed for the swivel caster to swivel. Furthermore, the general rule is the bigger the offset the better the castor's running performance but the lower the weight it can carry. Read More
- Display 15 Products per page
In Stock160mm Stainless Steel Swivel Castor, 300kg Capacity | Nylon Wheel, Plain Bore (MSS160NY)
£39.84160mm Top Plate Swivel Castor (Stainless Steel Cas... Read Moretor) with 105x80 Hole Centres. Nylon Wheel with Plain Bore. Load Capacity = 300kg- In Stock
150mm Swivel Castor, 1020kg Capacity | Cast Iron Wheel, Roller Bearing (655CIB)
£87.69150mm Top Plate Swivel Castor. The 4 hole top p... Read Morelate measures 162mm x 140mm with 140mm x 105mm Bolt Hole Centres. to suit a 10mm Fixing Bolt. The wheel is a solid Cast Iron with a needle roller bearing. Load Capacity = 1020kg.
The 55 series castor is made from heavy duty pressed steel with a bright zinc finish and roller ball bearing in the swivel head.
- In Stock
100mm Swivel Castor, 900kg Capacity | Nylon Wheel, Ball bearing (GXT100ASFMCD)
Original price was: £204.12.£128.20Current price is: £128.20.Sale!100mm Machine... Read More Cast Nylon Wheel fitted into an extra strong Fabricated Top Plate Swivel Castor with a double thrust bearing in the swivel head to optimise the load capacity. The fixing bolt spacings are the European Standard size of 80x60mm. The load capacity of this castor is 900kg at 4km/h
This high performance castor is fitted with a white machine cast nylon wheel that will not mark the floor. The extra strong welded castor frame is powder coated to protect the frame and top plate and it is fitted with a high performance castor wheel containing two ball bearings. The bearings turn on a specially designed integrated axle shaft arrangement making this castor one of the most durable in the market. Perfect for moving very heavy loads where strength, durability and performance are critical.
The double thrust bearing in the swivel head optimise heavy loads
- In Stock
125mm Swivel Castor, 150kg Capacity | Rubber Tyre Wheel, Single Ball Bearing (MSVH125RN2B)
£16.51125mm Single Bolt Hole (12mm) Pressed Steel Swivel... Read More Castor. This castor has an Elastic Blue Rubber Tyred Wheel on a Nylon Centred Wheel with a Single Ball Bearing. The Load Capacity is 150kg using manual propulsion at 4km/h. - In Stock
50mm Swivel Castor, 55kg Capacity | Polypropylene Wheel, Plain Bore (LSV050PPBH)
£2.33This castor c... Read Moreomes with a 50mm White Polypropylene Wheel fitted into a 10mm Single Bolt Hole Swivel Castor (Pressed Steel Frame). The load capacity of this castor is 55kg using manual propulsion at 4km/h.
This castor is fitted with a white polypropylene wheel that that will not damage or mark the floor and is ideal for most general, light duty castor purposes such as trolley castors or dolly castors. Single Bolt Hole castors can have a expander tube fitting (purchased separately) attached to insert into hollow square or round tubing. See our section on Expander Tube Fittings
- In Stock
100mm Swivel Castor, 340kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (TSH100PT1H)
£108.74100mm Heavy Duty Top Plate Swivel Castor (Fabri... Read Morecated Castor) with 105x80 Hole Centres. Polyurethane Tyre / Cast Iron Centre Wheel with Roller Bearing. Load Capacity = 340kg
Features of the H Series Castor
- The Genuine Revvo H Series castor is made from heavy gauge forged steel with a hardened ball race in the swivel race that serve as both thrust and radial bearings.
- The swivel head comes with a metal swivel seal and hydraulic grease nipple
- The closed base of the swivel ring prevents downward escape of lubricant
- The side plates are press formed to a cylindrical shape to give the best strength to weight ratio
- A four way direction lock can be purchased and fitted to the castor 9999-0181
- In Stock
100mm Swivel Castor, 150kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (1321726)
£14.25100mm Top Plate Swivel Castor (Pressed Steel) with... Read More 80x60 Hole Centres. Polyurethane Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 150kg.This is a 4 hole plate fitting castor and the bolt holes suit an 8mm bolt as well as being slotted (rather than round) to accommodate 80/76mm x 60x44.5mm. - In Stock
125mm Swivel Castor, 150kg Capacity | Nylon Wheel, Plain Bore (1321010)
£8.75125mm Top Plate Swivel Castor (Pressed Steel) w... Read Moreith 80x60 Hole Centres. Nylon Wheel with Plain Bore. Load Capacity = 150kg
This is a 4 hole plate fitting castor and the bolt holes suit an 8mm bolt as well as being slotted (rather than round) to accommodate 80/76mm x 60x44.5mm.
- Out of Stock - On the Way
100mm LAG Swivel Castor, 300kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (23603)
£48.38100mm Top Plate Swivel Castor (LAG Pressed Steel) ... Read Morewith a Top Plate measuring 105x80mm and 80x60mm Fixing Bolt Hole Centres. This caster has an overall height of 137mm and an offset of 37mm. The wheel is a quality Polyurethane Tyre on Cast Iron Centre Wheel with a 30mm Tread Width and Ball Bearings. Load Capacity = 300kg - In Stock
100mm Swivel Castor, 300kg Capacity | Nylon Wheel, Ball bearing (MSK100NY2B)
£17.60100mm Top Plate Swivel Castor (Pressed Steel) with... Read More 80x60 Hole Centres. Nylon Wheel with Ball bearing. Load Capacity = 300kg - In Stock
75mm Swivel Castor, 70kg Capacity | Polypropylene Wheel, Plain Bore (LSV075PP)
£3.4175mm white polypropylene Wheel fitted into a Top P... Read Morelate Swivel Castor with 55x42mm bolt hole centres. The load capacity of this castor is 50kg using manual propulsion at 4km/hThis popular general purpose castor is fitted with a hard white polypropylene wheel that won't damage concrete floors. The hard tread lowers rolling and swivelling resistance making this castor easier to push compared to softer treads. This castor is ideal for most domestic or industrial castor uses where a small yet sturdy swivel castor in needed. - In Stock
260mm Fixed Castor, 120kg Capacity | Puncture Proof Wheel, Roller Bearing (KF260PPD)
£94.40260mm Puncture Proof Fixed Castor (Pressed Steel) ... Read Morewith 150x115mm Fixing Bolt Hole Centres. Diamond Tread Puncture Proof Wheel on a Red Polypropylene (Plastic) Centre with a Roller Bearing. Load Capacity = 120kgThe wheel is sized 3.00-4 and made from microcellular polyurethane making it a strong Light-Medium duty wheel and though it has a 10" diameter, it is also commonly referred to as a 260mm wheel. - In Stock
100mm Swivel Castor, 150kg Capacity | Nylon Wheel, Roller Bearing (MSVH100NY1B)
£6.57100mm White Nylon Wheel with a roller bearing f... Read Moreitted into a pressed steel single bolt hole swivel castor bracket. The Swivel Bracket has a 12mm Single Bolt Hole top plate. The load capacity of this castor is 150kg using manual propulsion at 4km/h (walking speed)
The Nylon Wheel has a low tractive resistance making it easier to get moving compared with softer rubber tread wheels. Together with the strength of nylon and because it wont damage concrete floors, this makes nylon wheel castors probably the most popular choice. The roller bearing lowers the rolling resistance to reduce the effort required to move the castors. Put this wheel into a strong bracket that has a double ball race in the swivel head makes this castor a great choice for the widest range of industrial and domestic applications.
- In Stock
50mm Stainless Steel Footmaster Levelling Castor, 280kg Capacity | Nylon Wheel, Plain Bore (KSGDN-60S)
Original price was: £140.79.£98.56Current price is: £98.56.Sale!50mm Footmaster castor with Stainless forged steel... Read More plate and stainless casting frame, M12 x 18mm Threaded Stem Fitting. 280kg Static and 140kg Dynamic Load Capacity with Machine Cast Nylon Wheel and Vibration Damping Rubber Pad. Nylon Handwheel height adjustment Operation. This footmaster castor has an overall height of 82mm when the wheel is engaged with a total lift of 15mm using the rubber footpad.The version of the Footmaster Levelling castor has a double ball bearing with hardened stainless steel bearings in the swivel head. The KSGDN Footmaster castor has completely corrosion-resistant components applied.The Footmaster levelling castor is a multi-functional swivel castor that provides mobility, levelling and anti-vibration functions. This allows users to move and position large equipment into place.Because of the lifting and lowering function of the Footmaster castor, like regular Jacking Castors, it is important understand that each castor may be subjected to HALF THE TOTAL WEIGHT. Therefore, the recommended load for each Footmaster Castor is half the castor's Static Load Capacity of when the castor is stationary and the foot-pads are lowered.This load capacity of the Footmaster Castor when being moved and positioned is given by the Dynamic Load Capacity. - In Stock
160mm Swivel Castor, 300kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (MSZH160PN1B)
£24.27160mm Single Bolt Hole (16mm) Swivel Castor (Press... Read Moreed Steel). The wheel has a Red Polyurethane Tyre (Shore A 92) on a White Nylon Centre with a Roller Bearing. The Load Capacity is 300kg using manual propulsion at 4km/h (walking speed).Key Specifications:- Bolt Hole Size: 16mm (To reduce the bolt hole to suit a 12mm fixing bolt, a reducing washer can be used. Click here for the ACZ600.)
- Overall Height: 185mm
- Tread Width: 40mm
- Bearing Type: Roller Bearing
- Swivel Radius: 140mm
- Tyre Hardness: Shore A 92
- Key Features:
- High Load Capacity
- Low Rolling Resistance
- High Wear Resistance
- Reduce Vibration
- Low noise Operation
