Swivel Castors
Swivel Castors and wheels can swivel 360 degrees about the vertical axis (see figure below). They consist of a housing and a caster wheel. The housing itself is made up of a plate fitting, swivel bearings and a yoke. The Yoke is often referred to as the castor's frame (see figure below).The plate fitting determines how the... castor is going to be attached to the equipment. It is usually either a single bolt hole fitting or a plate fixing which is generally square, rectangular or triangular. Plate fittings are usually bolted to equipment so knowing your required bolt hole centres is important. The Swivel Head consists of a ball race and a number of ball bearings that roll within it. Swivel Castors can either have a single ball race or a double ball race. They perform the same function. The double ball race was developed for medium and heavy applications. This is because they are compact, perform well under static and dynamic loads and provide excellent steerability.
Swivel castors can be fitting with locks which lock (brake) wither the wheel or the swivel head or both. See Brake Castors.
Swivel Castor Components
Swivel Castor Offset
The Swivel Castor's offset it the distance from the swivel axis to the centre of the wheel (where it is secured to the castor frame). It is the reason a swivel castor will go in the direction you want it to go regardless its starting direction. The offset and castor wheel's diameter make up the swivel radius where the swivel radius = Offset + (Wheel Diameter / 2).
This is the radius of circle described but the outer dimension of the wheel swivelling around the vertical axis. Basically, this is important because it tells you how much room is needed for the swivel caster to swivel. Furthermore, the general rule is the bigger the offset the better the castor's running performance but the lower the weight it can carry. Read More
- Display 15 Products per page
In Stock200mm Swivel Castor, 600kg Capacity | Cast Iron Wheel, Ball Bearing (KSMG200CIB)
£57.34200mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith 105x80 Hole Centres. Cast Iron Wheel with Ball Bearing. Load Capacity = 600kg- In Stock
100mm LAG Swivel Castor with Brake, 300kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (23606)
£58.16100mm Top Plate Swivel Castor (LAG Pressed Steel... Read More) with a large Top Plate measuring 135 x 110mm and 105 x 80mm Fixing Bolt Hole Centres. This caster has an overall height of 137mm and an offset of 37mm. The wheel is a quality Polyurethane Tyre on Cast Iron Centre Wheel with a 40mm Tread Width and Ball Bearings. Load Capacity = 300kg - In Stock
150mm Swivel Castor, 500kg Capacity | Polyurethane Tyre Wheel, Ball bearing (KSCR15020241)
£58.95150mm Swivel Castor (Pressed Steel) and Crown Trea... Read Mored Polyurethane Tyred / Cast Iron Centre Wheel with Ball Bearing. Load Capacity = 500kg - In Stock
200mm Swivel Castor, 500kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (822PNB)
£59.07200mm Top Plate Swivel Castor (Pressed Steel) with... Read More 105x80 Hole Centres. Polyurethane Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 500kg - In Stock
200mm Swivel Castor, 500kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (KSMG200RUB)
£59.64200mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith 105x80 Hole Centres. Rubber Tyre / Cast Iron Centre Wheel with Ball Bearing. Load Capacity = 500kg - In Stock
150mm Swivel Castor, 500kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (KSMG150PCB)
£59.95150mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith a Polyurethane Tyre wheel with a Cast Iron Centre and Ball Bearings. Load Capacity = 500kg using manual propulsion at 4 km/h.Key Specifications:- Top Plate Size: 140mm x 110mm
- Bolt Hole Centres: 105mm x 80mm
- Overall Height: 190mm
- Tread Width: 45mm
- In Stock
160mm Swivel Castor, 500kg Capacity | Nylon Wheel, Ball Bearing (KS160NYBJ500)
£60.01160mm Swivel Castor (Heavy Duty Pressed Steel) wit... Read Moreh a 135mm x 110mm Top Plate with 105x80mm Fixing Hole spacings. The castor wheel is a Solid White Nylon Castor Wheel with two ball bearings. Load Capacity = 500kg - In Stock
160mm Stainless Steel Swivel Castor, 300kg Capacity | Rubber Tyre Wheel, Roller Bearing (MSS160RNBBH)
£62.08160mm Bolt Hole Swivel Castor (Stainless Steel Cas... Read Moretor) with 16mm Bolt Hole. Blue Rubber Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 300kg - In Stock
75mm Footmaster Levelling Castor, Plate Fitting, 800kg Capacity | Nylon Wheel (KGD-100F)
£62.7575mm Foot Master Levelling Castor with an Ivory... Read More Colour powder coating finish. This product has a 4-hole top plate with 70mm x 70mm bolt hole centres which is also powder coated for added protection. The wheel is made from premium quality black Nylon with a 30mm Tread width and the Die Cast Aluminium Foot Pad has a rubber vibration damping pad. This foot pad has a Nylon Hand-wheel operation
This product's load capacity has increased to 800kg Static Load and 400kg Dynamic Load.
Because of the lifting and lowering function of the Foot Master castor, like all Jacking Castors, it is important understand that each castor may be subjected to HALF THE TOTAL WEIGHT. Therefore, the recommended load capacity for each Foot Master Levelling Castor is half the castor's Static Load Capacity, that is, when the castors' levelling function is not being used. The load capacity of the Footmaster Castor when it is being moved and positioned is given by the Dynamic Load Capacity.
This levelling castor is a multi-functional swivel castor that provides mobility, levelling and anti-vibration functions. This allows users to move and position large equipment into place with added stability using the levelling and anti-vibration features.
- In Stock
75mm Black Footmaster Levelling Castor, Plate Fitting, 800kg Capacity | Nylon Wheel (KGD-100FBLACK)
£62.7575mm Foot Master Levelling Castor with an Black po... Read Morewder coating finish. This product has a 4-hole top plate with 70mm x 70mm bolt hole centres which is also powder coated for added protection. The wheel is made from premium quality black Nylon with a 30mm Tread width and the Die Cast Aluminium Foot Pad has a rubber vibration damping pad. This foot pad has a Nylon Hand-wheel operationThis product's load capacity has increased to 800kg Static Load and 400kg Dynamic Load.Because of the lifting and lowering function of the Foot Master castor, like all Jacking Castors, it is important understand that each castor may be subjected to HALF THE TOTAL WEIGHT. Therefore, the recommended load capacity for each Foot Master Levelling Castor is half the castor's Static Load Capacity, that is, when the castors' levelling function is not being used. The load capacity of the Footmaster Castor when it is being moved and positioned is given by the Dynamic Load Capacity.This levelling castor is a multi-functional swivel castor that provides mobility, levelling and anti-vibration functions. This allows users to move and position large equipment into place with added stability using the levelling and anti-vibration features. - In Stock
75mm AGV Swivel Castor, Dual Wheel, 200kg Capacity | Polyurethane Wheel, Ball bearing (GAPHD75ASFHUD)
Original price was: £163.28.£63.11Current price is: £63.11.Sale!Twin wheel 75mm ... Read MoreAutomated Guided Vehicle (AGV) Castor has a bracket made from strong pressed steel with precision ball bearings in the swivel head for smooth swivelling action and durability. This compact castor has a exceptional height to load ratio. The load capacity of this castor is 200kgTwo rows of bearings in the swivel head makes the castor swivel smoothly and the 4 sheets of specially hardened upper and lower bearing seats protects the swivelling parts. This ensures a fast and smooth swivel action for much longer than a standard swivel castor which is important in frequent and continual use.The bolt holes are slotted to 78mm x 78mm / 64mm x 64mm with a 10.5mm fixing bolt hole diameter,This castors is fitted with two wheels with a Polyurethane tyre (Shore A 95) on an Aluminium centre containing ball bearings, The polyurethane wheel has excellent elasticity the minimises slipping that can happen when an AGV starts or stops. In addition, the elasticity also absorbs small shocks arising from small imperfections in the floor. The wheel itself is non marking and will not damage the floor. - In Stock
125mm Swivel Castor, 300kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (KS125PCB300)
£63.15125mm Top Plate Swivel Castor (Industrial Castor -... Read More Pressed Steel Frame).This castor has a 4 hole top plate with 80x60mm Fixing Bolt Hole Centres and an overall height of 159mm. The wheel has an orange Polyurethane Tyre with a Cast Iron Centre and Ball Bearings. Load Capacity = 300kg - In Stock
200mm Swivel Castor, 500kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (MSK200PC2B)
£63.71200mm Top Plate Swivel Castor (Pressed Steel) with... Read More 105x80mm Fixing Bolt Hole Centres. Polyurethane Tyre on a Cast Iron Centre Wheel with Ball Bearings. Load Capacity = 500kg. - In Stock
125mm Swivel Castor, 300kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (MSK125PC2B)
£64.00125mm Top Plate Swivel Castor (Pressed Steel) with... Read More 80x60mm Fixing Bolt Hole Centres. Polyurethane Tyre on a Cast Iron Centre Wheel with Ball Bearings. Load Capacity = 300kg.This castor is made from heavy gauge pressed steel with a 5mm thick Top Plate and 4mm Castor Forks. It is a product that is built to last and is great for arduous applications. - In Stock
150mm Swivel Castor, 500kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (622SUB)
£64.21150mm Top Plate Swivel Castor (Pressed Steel) with... Read More 105x80 Hole Centres. Polyurethane Tyre / Cast Iron Centre Wheel with Roller Bearing. Load Capacity = 500kg
