Swivel Castors
Swivel Castors and wheels can swivel 360 degrees about the vertical axis (see figure below). They consist of a housing and a caster wheel. The housing itself is made up of a plate fitting, swivel bearings and a yoke. The Yoke is often referred to as the castor's frame (see figure below).The plate fitting determines how the... castor is going to be attached to the equipment. It is usually either a single bolt hole fitting or a plate fixing which is generally square, rectangular or triangular. Plate fittings are usually bolted to equipment so knowing your required bolt hole centres is important. The Swivel Head consists of a ball race and a number of ball bearings that roll within it. Swivel Castors can either have a single ball race or a double ball race. They perform the same function. The double ball race was developed for medium and heavy applications. This is because they are compact, perform well under static and dynamic loads and provide excellent steerability.
Swivel castors can be fitting with locks which lock (brake) wither the wheel or the swivel head or both. See Brake Castors.
Swivel Castor Components
Swivel Castor Offset
The Swivel Castor's offset it the distance from the swivel axis to the centre of the wheel (where it is secured to the castor frame). It is the reason a swivel castor will go in the direction you want it to go regardless its starting direction. The offset and castor wheel's diameter make up the swivel radius where the swivel radius = Offset + (Wheel Diameter / 2).
This is the radius of circle described but the outer dimension of the wheel swivelling around the vertical axis. Basically, this is important because it tells you how much room is needed for the swivel caster to swivel. Furthermore, the general rule is the bigger the offset the better the castor's running performance but the lower the weight it can carry. Read More
- Sort by Popularity (sales)
- Display 15 Products per page
In Stock125mm Stainless Steel Swivel Castor, 150kg Capacity | Rubber Tyre Wheel, Roller Bearing (MSS125RNB)
£34.09125mm Top Plate Swivel Castor (Stainless Steel Cas... Read Moretor) with 80x60 Hole Centres. Blue Rubber Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 150kg- In Stock
100mm Swivel Castor, 200kg Capacity | Rubber Tyre Wheel, Ball Bearing (KSMG100EAB)
£30.98100mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith a 4 hole top plate fitting and 105x80mm Bolt Hole Centres. The castor wheel is a Black Rubber Tyre on an Aluminium Centre with Ball Bearing. Load Capacity = 200kg - In Stock
50mm Low Level Swivel Castor, 160kg Capacity | Polyurethane Tyre Wheel, Plain Bore (2SL050PT0L)
Original price was: £26.21.£24.59Current price is: £24.59.Sale!50mm Low Level Twin Wheel Swivel Castor (REVVO Bra... Read Morend). The Polyurethane tyre wheels have a tread width of 14mm each and turn on a smooth Plain Bore. The Load Capacity of 160kg.This castors offers an exceptional load capacity in relation to their low overall working height and is ideal for heavy equipment being used on smooth, hard flooring. The differential action from the twin wheels makes for smooth operation.This castor has a round top plate with a diameter of 95mm and 4 fixing holes to suit a 6mm bolt. Each fixing hole is spaced 51mm from the directly opposite fixing hole (the largest distance between the fixing holes) - In Stock
75mm Footmaster Levelling Castor, Plate Fitting, 800kg Capacity | Nylon Wheel (KGD-100F-105X80)
Original price was: £57.04.£53.50Current price is: £53.50.Sale!75mm Foot Master Levelling Castor with an Ivory... Read More Colour powder coating finish. This product has a 4-hole top plate with 105mm x 80mm bolt hole centres which is also powder coated for added protection. The wheel is made from premium quality black Nylon with a 30mm Tread width and the Die Cast Aluminium Foot Pad has a rubber vibration damping pad. This foot pad has a Nylon Hand-wheel operation
This product's load capacity has increased to 800kg Static Load and 400kg Dynamic Load.
Because of the lifting and lowering function of the Foot Master castor, like all Jacking Castors, it is important understand that each castor may be subjected to HALF THE TOTAL WEIGHT. Therefore, the recommended load capacity for each Foot Master Levelling Castor is half the castor's Static Load Capacity, that is, when the castors' levelling function is not being used. The load capacity of the Footmaster Castor when it is being moved and positioned is given by the Dynamic Load Capacity.
This levelling castor is a multi-functional swivel castor that provides mobility, levelling and anti-vibration functions. This allows users to move and position large equipment into place with added stability using the levelling and anti-vibration features.
- In Stock
125mm Swivel Castor, 630kg Capacity | Cast Iron Wheel, Roller Bearing (TSH125CI1H)
£88.54125mm Heavy Duty Top Plate Swivel Castor (Fabricat... Read Moreed Castor) with 105x80mm Bolt Hole Centres. Cast Iron Wheel with Roller Bearing. Load Capacity = 630kgFeatures of the H Series Castor- The Genuine Revvo H Series castor is made from heavy gauge forged steel with a hardened ball race in the swivel race that serve as both thrust and radial bearings.
- The swivel head comes with a metal swivel seal and hydraulic grease nipple
- The closed base of the swivel ring prevents downward escape of lubricant
- The side plates are press formed to a cylindrical shape to give the best strength to weight ratio
- A four way direction lock can be purchased and fitted to the castor 9999-0181
- In Stock
100mm Stainless Steel Swivel Castor, 150kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (MSS100PNBBH)
£23.71100mm Bolt Hole Swivel Castor (Stainless Steel Cas... Read Moretor) with 12mm Bolt Hole. Polyurethane Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 150kg - In Stock
80mm Stainless Steel Swivel Castor, 150kg Capacity | Nylon Wheel, Plain Bore (MSS080NY)
£14.6580mm Top Plate Swivel Castor (Stainless Steel Cast... Read Moreor) with 80x60mm Bolt Hole Centres. Nylon castor wheel with Plain Bore. Load Capacity = 150kg - In Stock
200mm Swivel Castor, 500kg Capacity | Nylon Wheel, Roller Bearing (KSMG200NYB)
£36.40200mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith 105x80 Hole Centres. Nylon Wheel with Roller Bearing. Load Capacity = 500kg - In Stock
100mm Swivel Castor, 150kg Capacity | Nylon Wheel, Ball Bearing (1321728)
£9.80100mm Top Plate Swivel Castor (Pressed Steel) w... Read Moreith 80x60 Hole Centres. Nylon Wheel with Ball Bearing. Load Capacity = 150kg
This is a 4 hole plate fitting castor and the bolt holes suit an 8mm bolt as well as being slotted (rather than round) to accommodate 80/76mm x 60x44.5mm.
- In Stock
160mm Swivel Castor, 160kg Capacity | Rubber Tyre Wheel, Roller Bearing (LSV160RMB)
£13.52160mm Top Plate Swivel Castor with a Black Rubber ... Read MoreTyre Wheel on a Pressed Steel centre complete with Thread Guards. It has 105x80mm bolt hole centres and a load capacity of 160kg using manual propulsion at 4km/h.This popular general purpose castor is fitted with a Black Rubber Tyre Wheel that is gentle on floors. The Caster wheel has a roller bearing that offers low rolling resistance. It is ideal as a new or replacement castor for most domestic or industrial applications such as a trolley or dolly where the travel speed of the castor generally does not exceed walking speed. - In Stock
50mm Swivel Castor, 50kg Capacity | Polypropylene Wheel, Plain Bore (LSM050PP)
£3.1950mm Swivel Castor with a 4 hole top plate and 48/... Read More38x48/38mm bolt hole centres to suit 6mm fixing bolts. The wheel is Black Polypropylene with Plain Bore. Load Capacity = 50kg - In Stock
175mm Swivel Castor (Powder Coated), 800kg Capacity | Polyurethane Tyre Wheel (KGHP175ASFMUD)
Original price was: £152.55.£88.44Current price is: £88.44.Sale!175mm Heavy-duty Swivel Castor with a Powder Coate... Read Mored Pressed Steel Bracket and a 225mm overall height. The caster wheel has a Blue Polyurethane Tyre (Shore A 95) on an Aluminium Centre with Ball BearingsFeatures:- 800kg Load Capacity: For the most demanding applications and heavy-duty loads.
- Silver/Grey Powder Coating: Making this the best looking heavy-duty industrial castor on the market. The powder-coating not only looks great but also provides corrosion protection which prolongs its optimal performance and keeps the castor looking good.
- Quality Ball Bearings: For the lowest rolling resistance to reduce the effort needed to move.
- Double Ball Bearing Race and hardened bearing Seats in the swivel head: For an optimum swivel rotation function and durability.
- Strong Pressed Steel Plate: The top plate measure 140x110mm with fixing bolt holes slotted to 105x80/75mm to suit 10mm bolts
- Precision Engineered: These castors have an incredibly smooth swivelling function with no "rock" to the swivel head and no sideways movement on the wheel for exceptional operating performance.
- In Stock
150mm Swivel Castor (Powder Coated), 700kg Capacity | Polyurethane Tyre Wheel (KGHP150ASFMUD)
Original price was: £137.41.£79.66Current price is: £79.66.Sale!150mm Heavy-duty Swivel Castor with a Powder Coate... Read Mored Pressed Steel Bracket and a 200mm overall height. The caster wheel has a Blue Polyurethane Tyre (Shore A 95) on an Aluminium Centre with Ball BearingsFeatures:- 700kg Load Capacity: For the most demanding applications and heavy-duty loads.
- Silver/Grey Powder Coating: Making this the best looking heavy-duty industrial castor on the market. The powder-coating not only looks great but also provides corrosion protection which prolongs its optimal performance and keeps the castor looking good.
- Quality Ball Bearings: For the lowest rolling resistance to reduce the effort needed to move.
- Double Ball Bearing Race and hardened bearing Seats in the swivel head: For an optimum swivel rotation function and durability.
- Strong Pressed Steel Plate: The top plate measure 140x110mm with fixing bolt holes slotted to 105x80/75mm to suit 10mm bolts
- Precision Engineered: These castors have an incredibly smooth swivelling function with no "rock" to the swivel head and no sideways movement on the wheel for exceptional operating performance.
- In Stock
60mm Compact Swivel Brake Castor, 150kg Capacity | Polyurethane Tyre Wheel, Ball bearing (KS060PT2BBHBR)
£22.0560mm Low Level swivel with brake castor and 12mm S... Read Moreingle Bolt Hole Fixing. This Low Level compact castor has an overall height of 80mm and an Orange Polyurethane Wheel on a steel centre with a 35mm Tread Width and Ball bearings. Load Capacity = 150kg - In Stock
100mm Swivel Castor, 150kg Capacity | Rubber Tyre Wheel with Single Ball Bearing (MSVH100RN2B)
£10.35100mm Single Bolt Hole (12mm) Pressed Steel Swivel... Read More Castor. This castor has an Elastic Blue Rubber Tyred Wheel on a Nylon Centred Wheel with a Single Ball Bearing. The Load Capacity is 150kg using manual propulsion at 4km/h.
