- Sorry, this product cannot be purchased.
Swivel Castors
Swivel Castors and wheels can swivel 360 degrees about the vertical axis (see figure below). They consist of a housing and a caster wheel. The housing itself is made up of a plate fitting, swivel bearings and a yoke. The Yoke is often referred to as the castor's frame (see figure below).The plate fitting determines how the... castor is going to be attached to the equipment. It is usually either a single bolt hole fitting or a plate fixing which is generally square, rectangular or triangular. Plate fittings are usually bolted to equipment so knowing your required bolt hole centres is important. The Swivel Head consists of a ball race and a number of ball bearings that roll within it. Swivel Castors can either have a single ball race or a double ball race. They perform the same function. The double ball race was developed for medium and heavy applications. This is because they are compact, perform well under static and dynamic loads and provide excellent steerability.
Swivel castors can be fitting with locks which lock (brake) wither the wheel or the swivel head or both. See Brake Castors.
Swivel Castor Components
Swivel Castor Offset
The Swivel Castor's offset it the distance from the swivel axis to the centre of the wheel (where it is secured to the castor frame). It is the reason a swivel castor will go in the direction you want it to go regardless its starting direction. The offset and castor wheel's diameter make up the swivel radius where the swivel radius = Offset + (Wheel Diameter / 2).
This is the radius of circle described but the outer dimension of the wheel swivelling around the vertical axis. Basically, this is important because it tells you how much room is needed for the swivel caster to swivel. Furthermore, the general rule is the bigger the offset the better the castor's running performance but the lower the weight it can carry. Read More
- Display 15 Products per page
-
In Stock80mm Stainless Steel Swivel Castor, 150kg Capacity | Nylon Wheel, Plain Bore (MSS080NY)
£14.6580mm Top Plate Swivel Castor (Stainless Steel Cast... Read Moreor) with 80x60mm Bolt Hole Centres. Nylon castor wheel with Plain Bore. Load Capacity = 150kg -
In Stock125mm Swivel Castor, 180kg Capacity | Rubber Tyre Wheel, Plain Bore (561RN)
£34.53125mm Top Plate Swivel Castor (Pressed Steel) with... Read More 140x105 Hole Centres. Rubber Tyre / Nylon Centre Wheel with Plain Bore. Load Capacity = 180kg -
In Stock75mm Swivel Castor, 50kg Capacity | Rubber Tyre Wheel, Roller Bearing (LSV075RMB)
£4.2675mm Top plate Swivel Castor with a Black Rubber T... Read Moreyre Wheel on a pressed steel centre. It has 55x42mm bolt hole centres and a load capacity of 50kg using manual propulsion at 4km/h. This popular general purpose castor is fitted with a Black Rubber Tyre Wheel that is gentle on floors. The Caster wheel has a roller bearing that offers low rolling resistance. It is ideal as a new or replacement castor for most domestic or industrial applications such as a trolley or dolly where the travel speed of the castor generally does not exceed walking speed. -
In Stock250mm Swivel Castor, 1100kg Capacity | Nylon Wheel, Ball bearing (HKS25025111)
£184.08250mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith 105x80 Hole Centres. Nylon Wheel with Ball bearing. Load Capacity = 1100kg -
In Stock
50mm Swivel Castor, 27kg Capacity | Rubber Tyre Wheel, Plain Bore (961RN)
£5.2850mm Top Plate Swivel Castor (Pressed Steel) with ... Read More54x25mm Fixing Bolt Hole Centres and 64mm Overall Height. The wheel is a Blue Rubber Tyre on a Black Nylon Centre Wheel with a Smooth Plain Bore and a 22mm Tread Width. Load Capacity = 27kg. The blue rubber tyre wheel has a soft tread and is both gentle on floors and non-marking. It also absorbs fine vibrations whilst moving which provides user comfort and limits noise. -
In Stock100mm Swivel Castor, 150kg Capacity | Polyurethane Tyre Wheel with Roller Bearing (1321786)
£12.96100mm Bolt Hole Swivel Castor (Pressed Steel) with... Read More 10mm Single Bolt Fixing Hole. Polyurethane Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 150kg -
In Stock200mm Swivel Castor, 800kg Capacity | Polyurethane Tyre Wheel, Ball bearing (KS200APCB800)
£88.06200mm Top Plate Swivel Castor (Heavy Gauge Pressed... Read More Steel Bracket) with 105x80mm Bolt Hole Centres. Polyurethane Tyre / Cast Iron Centre Wheel with Ball Bearing. Load Capacity = 800kg -
In Stock100mm Swivel Castor, 150kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (MSV100PN2B)
£9.44100mm Red Polyurethane Tyre Wheel on a Nylon Centr... Read Moree with a ball bearing fitted into a pressed steel swivel castor bracket. The Swivel Bracket has a 4 hole top plate with 80x60mm bolt hole spacing. The load capacity of this castor is 150kg using manual propulsion at 4km/h (walking speed) The Polyurethane tyre offers a low tractive resistance making it easier to get moving compared with softer rubber tread wheels. It is also a bit softer than hard tread wheels making the castor smoother and quieter running. The polyurethane tyre is also non-marking and gentle on floors while the ball bearing lowers the rolling resistance to reduce the effort required to move the castors. Put this wheel into a strong bracket that has a double ball race in the swivel head and you have a castor that is a great choice for the wide range of industrial and domestic applications.</p> -
In Stock
63mm Swivel Castor, 60kg Capacity | 63mm Rubber Tyre Wheel, Plain Bore (261RN)
£8.8063mm Swivel Castor (Pressed Steel) with 4-hole top... Read More plate and 76x44.5mm Fixing Bolt Hole Centres and an overall height of 81mm. The wheel has a Blue Elastic Rubber Tyre with a black Nylon Centre, 25mm Tread Width and a smooth Plain Bore. Load Capacity = 60kg. Elastic Blue Rubber tyres are stronger than standard natural rubber. It has a soft tread and is both gentle on floors and non-marking while absorbing fine vibrations when moving which provides user comfort and limits noise. -
In Stock80mm Swivel Castor, 130kg Capacity | Nylon Wheel, Roller Bearing (MSV080NY1B)
£7.8480mm White Nylon Wheel with a roller bearing fi... Read Moretted into a pressed steel swivel castor bracket. The Swivel Bracket has a 4 hole top plate with 80x60mm bolt hole spacing. The load capacity of this castor is 130kg using manual propulsion at 4km/h (walking speed)
The Nylon Wheel has a low tractive resistance making it easier to get moving under load compared with softer rubber tread wheels but may produce more noise when in use. The strength of nylon and because it wont damage concrete floors, makes nylon wheel castors probably the most popular choice and the roller bearing lowers the rolling resistance to reduce the effort required to move the castors. Put this wheel into a strong bracket that has a double ball race in the swivel head makes this castor a great choice for the widest range of industrial and domestic applications.
-
In Stock100mm Stainless Steel Swivel Castor, 150kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (MSS100PNB)
£24.47100mm Top Plate Swivel Castor (Stainless Steel Cas... Read Moretor) with 80x60mm Bolt Hole Centres. Polyurethane Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 150kg -
In Stock160mm Stainless Steel Swivel Castor, 300kg Capacity | Rubber Tyre Wheel, Roller Bearing (MSS160RNB)
£57.33160mm Top Plate Swivel Castor (Stainless Steel Cas... Read Moretor) with 105x80 Hole Centres. Blue Rubber Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 300kg -
In Stock150mm Swivel Castor, 1500kg Capacity | Polyurethane Tyre Wheel, Ball bearing (GXT150ASFHUD)
Original price was: £476.39.£299.19Current price is: £299.19. Sale!150mm Polyure... Read Morethane tyre Wheel with an aluminium centre fitted into an extra strong Fabricated Top Plate Swivel Castor with 148/132x111/99mm bolt hole centres. The slotted bolt holes incorporate the European and UK standard 140x105mm bolt holes. The load capacity of this castor is 1500kg at 4km/h
This high performance castor is fitted with a quality polyurethane tyre wheel that will not mark the floor. An extra strong welded castor frame that is powder coated and fitted with a high performance castor wheel containing two ball bearings that turns on a specially designed integrated axle shaft arrangement makes this castor one of the most durable in the market. Perfect for moving very heavy loads where strength, durability and performance are critical
The swivel head of the 125mm - 250mm sizes of the GXT range come with a thrust bearing and a taper roller bearing in the swivel head.
-
In Stock100mm Stainless Steel Swivel Castor, 150kg Capacity | Rubber Tyre Wheel, Roller Bearing (MSS100RNBBH)
£26.29100mm Bolt Hole Swivel Castor (Stainless Steel Cas... Read Moretor) with 12mm Bolt Hole. Blue Rubber Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 150kg -
In Stock150mm Swivel Castor, 300kg Capacity | Rubber Tyre Wheel, Roller Bearing (622RNB)
£40.29150mm Top Plate Swivel Castor (Pressed Steel) with... Read More 105x80 Hole Centres. Rubber Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 300kg
