- Sorry, this product cannot be purchased.
Swivel Castors
Swivel Castors and wheels can swivel 360 degrees about the vertical axis (see figure below). They consist of a housing and a caster wheel. The housing itself is made up of a plate fitting, swivel bearings and a yoke. The Yoke is often referred to as the castor's frame (see figure below).The plate fitting determines how the... castor is going to be attached to the equipment. It is usually either a single bolt hole fitting or a plate fixing which is generally square, rectangular or triangular. Plate fittings are usually bolted to equipment so knowing your required bolt hole centres is important. The Swivel Head consists of a ball race and a number of ball bearings that roll within it. Swivel Castors can either have a single ball race or a double ball race. They perform the same function. The double ball race was developed for medium and heavy applications. This is because they are compact, perform well under static and dynamic loads and provide excellent steerability.
Swivel castors can be fitting with locks which lock (brake) wither the wheel or the swivel head or both. See Brake Castors.
Swivel Castor Components
Swivel Castor Offset
The Swivel Castor's offset it the distance from the swivel axis to the centre of the wheel (where it is secured to the castor frame). It is the reason a swivel castor will go in the direction you want it to go regardless its starting direction. The offset and castor wheel's diameter make up the swivel radius where the swivel radius = Offset + (Wheel Diameter / 2).
This is the radius of circle described but the outer dimension of the wheel swivelling around the vertical axis. Basically, this is important because it tells you how much room is needed for the swivel caster to swivel. Furthermore, the general rule is the bigger the offset the better the castor's running performance but the lower the weight it can carry. Read More
- Display 15 Products per page
-
In Stock80mm Low Level Swivel Castor, 700kg Capacity | Nylon Wheel, Ball bearing (KS080NYBJ700)
£32.3980mm Low Level Swivel Castor fitted with an extra ... Read Moreheavy duty Nylon Wheel running on Ball Bearings. The 4 hole Top Plate has 80x60mm Bolt Hole centres and the load capacity of this castor is 700kg. This castor is ideal for heavy duty applications where there is a height restriction and the White Nylon Wheel is non-marking and won't damage concrete floors -
In Stock200mm Swivel Castor, 200mm, 550kg Capacity, Nylon Wheel, Roller Bearing (BS5200NY1BA)
£95.09200mm Bolt Hole Swivel Castor (Fabricated Steel) w... Read Moreith 19.8mm Single Bolt Hole (to suit a 3/4" fixing Bolt). This extra heavy duty single bolt hole Castor has a solid white nylon with a needle roller bearing. The tread width of the wheel is 46mm and the Load Capacity is 550kg at 4km/h (walking speed) using manual propulsion. Key Specifications:- Ball Bearing Swivel Head
- Wheal Bearing Type: Roller Bearings
- Overall Height: 244mm
- Tread Width: 46mm
- Offset: 44.5mm
- Fixing Bolt Hole Size: 19.8mm
- Load Capacity: 550kg using manual propulsion at 4km/h (walking speed)
- Zinc Plated
-
In Stock200mm Swivel Castor, 1500kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (2SH200PT15)
£307.52200mm Heavy Duty Top Plate Swivel Castor (Fabricat... Read Moreed Castor - Twin Wheel) with 105x80 Hole Centres. Polyurethane Tyre / Cast Iron Centre Wheel with Roller Bearing. Load Capacity = 1500kg -
In Stock100mm Swivel Castor, 100kg Capacity | Thermoplastic Rubber Wheel, Ball Bearing (KATS100TPR)
£6.34Keystone Appa... Read Moreratus / Institutional Castor with 100mm Grey Thermoplastic Wheel fitted into a Pressed Steel Top Plate Swivel Castor. This caster has slotted bolt hole centres measuring 61.5/56 x 51.5/46.5mm. The load capacity is 100kg using manual propulsion at 4km/h
Running on a quality ball bearing the wheel offers excellent rolling performance. This popular apparatus castor is a great choice for a wide range of industrial and domestic applications such as trolley and garment rails, medical devices and hospitality equipment. Fitted with a grey thermoplastic wheel on a polypropylene centre this wheel is non-marking and gentle on floors and has a large plastic thread guard to protect the ball bearing from dirt ingress
-
In Stock150mm Swivel Castor, 400kg Capacity | Rubber Tyre Wheel, Roller Bearing (655RTB)
£94.21150mm Top Plate Swivel Castor. The 4 hole top p... Read Morelate measures 162mm x 140mm with 140mm x 105mm Bolt Hole Centres. to suit a 10mm Fixing Bolt. The Wheel has a Rubber Tyre on Cast Iron Centre with a needle roller bearing. Load Capacity = 400kg.
The 55 series castor is made from heavy duty pressed steel with a bright zinc finish and roller ball bearing in the swivel head.
-
In Stock200mm Swivel Castor, 1000kg Capacity | Polyurethane Tyre Wheel, Ball bearing (HKS20020241)
£137.90200mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith 105x80 Hole Centres. Polyurethane Tyre / Cast Iron Centre Wheel with Ball bearing. Load Capacity = 1000kg -
In Stock160mm Swivel Castor, 500kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (KSMG160PAB)
£54.68160mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith 105x80 Hole Centres. Polyurethane Tyre / Aluminium Centre Wheel with Ball Bearing. Load Capacity = 500kg -
In StockSwivel Castor, 1000kg Capacity | 150mm Polyurethane Tyre Wheel, Ball bearing, (K2ST150PC2BD)
£454.87150mm Twin Wheel Extra Heavy Duty Fabricated Sw... Read Moreivel Castor fitted with a directional lock to fix the swivel head in position. The swivel head turns on thrust and taper roller bearings for extra strength and the bracket is finished in black epoxy paint.
This castor has a top plate measuring 230mm x 230mm with bolt hole spacings of 190mm x 190mm drilled to 13mm diameter. The two Polyurethane Tyre on a Cast Iron Centre wheels each have ball bearings fitted to reduce the rolling resistance.
The castor has a 1000kg Load Rating at 4km/h
-
In Stock200mm Swivel Castor, 500kg Capacity | Nylon Wheel, Roller Bearing (822NYB)
£51.97200mm Flexello Top Plate Swivel Castor (Pressed St... Read Moreeel) With 105X80mm Bolt Hole Centres. White Nylon Wheel With Roller Bearing. Load Capacity = 500Kg -
In Stock160mm Swivel Castor, 300kg Capacity | Rubber Tyre Wheel, Ball Bearing (KSMG160EAB)
£50.90160mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith 105x80 Hole Centres. Black Rubber Tyre / Aluminium Centre Wheel with Ball Bearing. Load Capacity = 300kg -
In Stock160mm Swivel Castor, 500kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (KSMG160PCB)
£76.04160mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith 105x80 Hole Centres. Polyurethane Tyre / Cast Iron Centre Wheel with Ball Bearing. Load Capacity = 500kg -
In Stock70mm Twin Wheel Swivel Castor | Polyurethane Tyre Wheel, Ball Bearing, 200kg Capacity (GAJSD70ASFHUD)
Original price was: £147.16.£71.10Current price is: £71.10. Sale!70mm Swivel Castor with Dual Polyurethane ... Read MoreTyres for AGVs Maximize your AGV’s performance with our high-quality Automated Guided Vehicle Castors. This 70mm swivel castor features dual (twin) polyurethane tyres mounted on durable aluminium centres, complemented by precision ball bearings. Designed to meet the high demands of AGV applications, this castor ensures smooth, efficient, and reliable operation in industrial settings. The black powder-coated bracket offers superior protection compared to standard zinc-plated frames, enhancing durability in harsh environments. Its low overall height of just 97mm makes it ideal for compact AGV systems, ensuring stability without compromising load capacity—supporting up to 200kg per castor (600kg over 4 castors).Key Specifications:
- Top Plate Fixing: 86x61mm bolt hole spacing with 9mm drilled holes, suited for 8mm bolts.
- Dual Polyurethane Tyres: 95 Shore A hardness for low tractive resistance, smooth and quiet operation.
- Non-Marking Tyres: Protects floors and reduces maintenance costs.
- Robust Swivel Bracket: Double ball race swivel head for enhanced manoeuvrability and durability.
Benefits:
- Optimized for AGVs: Engineered for automated guided vehicles, ensuring reliable, continuous performance.
- Smooth, Quiet Operation: Polyurethane tyres reduce rolling resistance and noise, enhancing efficiency.
- Long-Lasting Durability: Strong aluminium centres and black powder-coated brackets for extended lifespan.
-
In Stock150mm Stainless Steel Swivel Castor, 150kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (MSS150PNB)
£39.23150mm Top Plate Swivel Castor (Stainless Steel Cas... Read Moretor) with 80x60 Hole Centres. Polyurethane Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 150kg -
In Stock
Swivel Castor (Twin Wheel), 300mm, 4000kg Capacity, Polyurethane Tyre Wheel, Ball Bearing (K2ST300PC2BD)
£911.75300mm Twin Wheel Extra Heavy Duty Swivel Castor wi... Read Moreth Directional Lock. The Castor Comes with 2 Heavy Duty Wheels with Polyurethane Tyres on a Cast Iron Centre. Each wheel runs on quality ball bearings. The load rating of this product is 4,000kg. The directional lock fixes the swivel head in one direction for straight line travel. -
In Stock250mm Swivel Castor, 1200kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (TSH250PT1H)
£181.78250mm Heavy Duty Top Plate Swivel Castor (Fabri... Read Morecated Castor) with 105x80 Hole Centres. Polyurethane Tyre / Cast Iron Centre Wheel with Roller Bearing. Load Capacity = 1200kg
Features of the H Series Castor
- The Genuine Revvo H Series castor is made from heavy gauge forged steel with a hardened ball race in the swivel race that serve as both thrust and radial bearings.
- The swivel head comes with a metal swivel seal and hydraulic grease nipple
- The closed base of the swivel ring prevents downward escape of lubricant
- The side plates are press formed to a cylindrical shape to give the best strength to weight ratio
- A four way direction lock can be purchased and fitted to the castor 9999-0181
