- Sorry, this product cannot be purchased.
Swivel Castors
Swivel Castors and wheels can swivel 360 degrees about the vertical axis (see figure below). They consist of a housing and a caster wheel. The housing itself is made up of a plate fitting, swivel bearings and a yoke. The Yoke is often referred to as the castor's frame (see figure below).The plate fitting determines how the... castor is going to be attached to the equipment. It is usually either a single bolt hole fitting or a plate fixing which is generally square, rectangular or triangular. Plate fittings are usually bolted to equipment so knowing your required bolt hole centres is important. The Swivel Head consists of a ball race and a number of ball bearings that roll within it. Swivel Castors can either have a single ball race or a double ball race. They perform the same function. The double ball race was developed for medium and heavy applications. This is because they are compact, perform well under static and dynamic loads and provide excellent steerability.
Swivel castors can be fitting with locks which lock (brake) wither the wheel or the swivel head or both. See Brake Castors.
Swivel Castor Components
Swivel Castor Offset
The Swivel Castor's offset it the distance from the swivel axis to the centre of the wheel (where it is secured to the castor frame). It is the reason a swivel castor will go in the direction you want it to go regardless its starting direction. The offset and castor wheel's diameter make up the swivel radius where the swivel radius = Offset + (Wheel Diameter / 2).
This is the radius of circle described but the outer dimension of the wheel swivelling around the vertical axis. Basically, this is important because it tells you how much room is needed for the swivel caster to swivel. Furthermore, the general rule is the bigger the offset the better the castor's running performance but the lower the weight it can carry. Read More
- Display 15 Products per page
-
In Stock200mm Swivel Castor, 800kg Capacity | Polyurethane Tyre Wheel, Ball bearing (KS200APCB800BR)
£105.67200mm Top Plate Swivel Castor with Total Stop Brak... Read Moree (Heavy Gauge Pressed Steel Bracket) with 105x80mm Bolt Hole Centres. Polyurethane Tyre on a Cast Iron Centre Wheel with Ball Bearing. Load Capacity = 800kg -
In Stock125mm Swivel Castor, 400kg Capacity | Polyurethane Tyre Wheel, Ball Bearing, (KSMG125PCB)
£50.53125mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith 105x80mm Bolt Hole Centres. Polyurethane Tyre / Cast Iron Centre Wheel with Ball Bearings. Load Capacity = 400kg Key Specifications and Features:- Top Plate Size: 140x110mm
- Bolt Hole Centres: Slotted 114x87mm / 97.5x71.5mm
- Fixing Bolt Size: 12mm
- Overall Height: 165mm
- Offset: 39mm
- Tread Hardness: 92 +/-3 Shore A
- Bearing Type: Ball Bearing
- Load Capacity: 400kg (manual propulsion at 4km/h)
- Polyurethane tyre castor wheels offer high load capacity and exceptional wear resistance—lasting up to 10 times longer than rubber wheels under similar conditions. With a soft tread that’s softer than concrete, they won’t damage floors and operate with minimal noise. Resistant to oils, greases, petrol, and a wide range of chemicals, they’re ideal for demanding environments.
-
In Stock100mm Black Swivel Castor, 200kg Capacity | Rubber Tyre Wheel, Ball Bearing (MSV100BRN2B)
£13.63100mm All Black Swivel Castor with Black Elastic R... Read Moreubber Tyre on a nylon centre wheel with a single ball bearing. This castor is designed for theatre applications to reduce reflection from lighting. It can also be used in any application where a pressed steel castor is required. The Swivel Brake Bracket has a 4 hole top plate with 80/77x60mm bolt hole spacing. The load capacity of this castor is 200kg using manual propulsion at 4km/h (walking speed) The Black Elastic Rubber Tyre offers a higher load capacity than standard grey or black rubber tyres and is quiet and gentle on floors. The soft tread rubber (65 Shore A) absorbs vibrations whilst in motion making this a low noise option. The ball bearing lowers the rolling resistance to reduce the effort required to move the castors. Together with the strong bracket that has a double ball race in the swivel head makes this castors a great performer and one of our most popular products. DOWNLOAD CATALOGUE PAGE HERE -
In Stock200mm Swivel Castor, 350kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (MSV200PN2B)
£36.66200mm Top Plate Swivel Castor (Pressed Steel) with... Read More 105x80 Hole Centres. Polyurethane Tyre / Nylon Centre Wheel with ball bearing. Load Capacity = 350kg -
In Stock125mm Swivel Castor, 250kg Capacity | Nylon Wheel, Ball Bearing (KS125NYB250)
£34.17125mm Top Plate Swivel Castor (Industrial Castor) ... Read Morewith 80x60 Hole Centres. Nylon Wheel with Ball Bearing. Load Capacity = 250kg -
In Stock50mm Swivel Castor, 50kg Capacity | Rubber Tyre Wheel, Plain Bore (LSV050RPBH)
£2.3850mm Single Bolt Hole Swivel Castor with a non mar... Read Moreking Grey Rubber Tyre Wheel with a nylon centre. This castor has a 10mm Single Bolt Hole Swivel Castor and has a Pressed Steel frame. The load capacity is 50kg using manual propulsion at 4km/h The a grey rubber tyre that will not mark the floor and is ideal for most general, light duty castor purposes such as trolley castors or dolly castors. Single Bolt Hole castors can have a expander tube fitting (purchased separately) attached to insert into hollow square or round tubing. See our section on Expander Tube Fittings -
In Stock50mm Swivel Castor, 55kg Capacity | Rubber Tyre Wheel, Plain Bore (2KS050TPRBH)
£9.1350mm Twin Wheel Single Bolt Hole Swivel Castor (Pr... Read Moreessed Steel) with 10mm Fixing Hole. Grey Thermoplastic Rubber Tyre / Polypropylene Centre Wheel with Plain Bore. Load Capacity = 55kg -
In Stock200mm Swivel Castor, 200mm, 550kg Capacity, Nylon Wheel, Roller Bearing (BS5200NY1BA)
£95.09200mm Bolt Hole Swivel Castor (Fabricated Steel) w... Read Moreith 19.8mm Single Bolt Hole (to suit a 3/4" fixing Bolt). This extra heavy duty single bolt hole Castor has a solid white nylon with a needle roller bearing. The tread width of the wheel is 46mm and the Load Capacity is 550kg at 4km/h (walking speed) using manual propulsion. Key Specifications:- Ball Bearing Swivel Head
- Wheal Bearing Type: Roller Bearings
- Overall Height: 244mm
- Tread Width: 46mm
- Offset: 44.5mm
- Fixing Bolt Hole Size: 19.8mm
- Load Capacity: 550kg using manual propulsion at 4km/h (walking speed)
- Zinc Plated
-
In Stock150mm Swivel Castor, 910kg Capacity | Cast Iron Wheel, Roller Bearing (TSH150CI15)
£88.29150mm Heavy Duty Top Plate Swivel Castor (Fabricat... Read Moreed Castor) with 105x80mm Fixing Bolt Hole Centres. Cast Iron Wheel with a 45mm Tread width and Roller Bearing. Load Capacity = 910kg. This caster wheel has a clear resin shellac finish. It combines strength and shock resistance with long life and economy and a very low tractive resistance which translates to ease of movement. This cast iron wheel is made from close grained castings sometimes described as semi-steel.
-
In Stock75mm Swivel Castor, 75kg Capacity | Rubber Tyre Wheel, Ball Bearing (KAHS075TPR)
£5.61This apparatu... Read Mores / institutional castor comes with a 75mm Grey Thermoplastic Rubber Tyre Wheel on a nylon centre fitted into a 10mm Single Bolt Hole Swivel Castor (Pressed Steel Frame) with a double ball race swivel head. The load capacity of this castor is 75kg using manual propulsion at 4km/h
This castor is fitted with a grey rubber tyre that will not mark or damage the floor and is ideal for most general, light duty castor purposes such as trolley castors or dolly castors. The Ball Bearing in the wheel provides excellent rolling performance.
Single Bolt Hole castors can have a expander tube fitting (purchased separately) attached to insert into hollow square or round tubing. See our section on Expander Tube Fittings
-
In Stock125mm Swivel Castor, 150kg Capacity | Nylon Wheel, Plain Bore (1321010)
£8.75125mm Top Plate Swivel Castor (Pressed Steel) w... Read Moreith 80x60 Hole Centres. Nylon Wheel with Plain Bore. Load Capacity = 150kg
This is a 4 hole plate fitting castor and the bolt holes suit an 8mm bolt as well as being slotted (rather than round) to accommodate 80/76mm x 60x44.5mm.
-
In Stock150mm Swivel Castor, 500kg | Polyurethane Tyre Wheel, Roller Bearing (622PNB)
£38.51150mm Top Plate Swivel Castor (Flexello) with 105X... Read More80mm Fixing Bolt Hole Centres and a 188mm Overall Height. The Castor Wheel has a Red Polyurethane Tyre on a White Nylon Centre Wheel With a 45mm Tread Width and a needle Roller Bearing. Load Capacity = 500Kg using manual propulsion at 4km/h. -
In Stock200mm Swivel Castor, 500kg Capacity | Polyurethane Tyre Wheel, Ball bearing (KSCR20020241)
£79.68200mm Swivel Castor (Pressed Steel) and Crown Trea... Read Mored Polyurethane Tyred / Cast Iron Centre Wheel with Ball Bearing. Load Capacity = 500kg -
In Stock160mm Swivel Castor, 500kg Capacity | Nylon Wheel, Plain Bore (MSK160NY)
£22.28160mm Top Plate Swivel Castor (Pressed Steel) with... Read More 105x80mm Fixing Bolt Hole Centres. Nylon Wheel with a Smooth Plain Bore. Load Capacity = 500kg.
-
In Stock80mm Swivel Castor, 70kg Capacity | Rubber Tyre Wheel, Roller Bearing (MSV080BRP1B)
£5.4980mm Black Rubber Tyre wheel on a plastic centre w... Read Moreith a roller bearing fitted into a pressed steel swivel castor bracket. The Swivel Bracket has a 4 hole top plate with 80x60mm bolt hole spacing. The load capacity of this castor is 70kg using manual propulsion at 4km/h (walking speed) The Black Rubber Tyre is softer wheel compared to hard tread wheels like nylon and the rubber absorbs vibrations whilst in motion making this a low noise option and will not scratch the floor. The roller bearing lowers the rolling resistance to reduce the effort required to move the castors. Together with the strong bracket that has a double ball race in the swivel head makes this castors a great choice for many industrial or domestic applications. The wheel might leave marks on the floor and if you want a non-marking version of this castor please order our MSV080GRP1B
