- Sorry, this product cannot be purchased.
Swivel Castors
Swivel Castors and wheels can swivel 360 degrees about the vertical axis (see figure below). They consist of a housing and a caster wheel. The housing itself is made up of a plate fitting, swivel bearings and a yoke. The Yoke is often referred to as the castor's frame (see figure below).The plate fitting determines how the... castor is going to be attached to the equipment. It is usually either a single bolt hole fitting or a plate fixing which is generally square, rectangular or triangular. Plate fittings are usually bolted to equipment so knowing your required bolt hole centres is important. The Swivel Head consists of a ball race and a number of ball bearings that roll within it. Swivel Castors can either have a single ball race or a double ball race. They perform the same function. The double ball race was developed for medium and heavy applications. This is because they are compact, perform well under static and dynamic loads and provide excellent steerability.
Swivel castors can be fitting with locks which lock (brake) wither the wheel or the swivel head or both. See Brake Castors.
Swivel Castor Components
Swivel Castor Offset
The Swivel Castor's offset it the distance from the swivel axis to the centre of the wheel (where it is secured to the castor frame). It is the reason a swivel castor will go in the direction you want it to go regardless its starting direction. The offset and castor wheel's diameter make up the swivel radius where the swivel radius = Offset + (Wheel Diameter / 2).
This is the radius of circle described but the outer dimension of the wheel swivelling around the vertical axis. Basically, this is important because it tells you how much room is needed for the swivel caster to swivel. Furthermore, the general rule is the bigger the offset the better the castor's running performance but the lower the weight it can carry. Read More
- Display 15 Products per page
-
In Stock200mm Swivel Castor, 100kg Load Capacity | Puncture Proof Wheel, Roller Bearing (KS200EVA)
£44.04200mm Puncture Proof Swivel Castor (Pressed Steel ... Read MoreBracket) with 137x105mm Top Plate dimensions and 105x80mm Fixing Bolt Hole. The wheel is a 200mm Rib Tread Puncture Proof Wheel on a black polypropylene centre with 50mm Tread with and a needle roller bearing. 100kg Load Capacity. The Caster wheel's tyre is made from microcellular polyurethane with a 65 Shore A hardness. -
In Stock300mm Swivel Castor, 1800kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (KS300PCB1800A)
£306.76300mm Top Plate Swivel Castor (Industrial Castor) ... Read Morewith 160x120 Hole Centres. Polyurethane Tyre / Cast Iron Centre Wheel with Ball Bearing. Load Capacity = 1800kg -
In StockSwivel Castor, 1000kg Capacity | 150mm Polyurethane Tyre Wheel, Ball bearing, (K2ST150PC2B)
£301.24150mm Twin Wheel Extra Heavy Duty Fabricated Sw... Read Moreivel Castor. The swivel head turns on thrust and taper roller bearings for extra strength and the bracket is finished in black epoxy paint.
This castor has a top plate measuring 170mm x 170mm with bolt hole spacings of 130mm x 130mm drilled to 13mm diameter. The two Polyurethane Tyre on a Cast Iron Centre wheels each have ball bearings fitted to reduce the rolling resistance.
The castor has a 1000kg Load Rating at 4km/h
-
In Stock50mm Swivel Castor, 40kg Capacity | Nylon Wheel, Plain Bore (1350000)
£2.2350mm Top Plate Swivel Castor (Pressed Steel) with ... Read More54x25mm Fixing Bolt Hole Centres. White Nylon Wheel with Plain Bore. Load Capacity = 40kg -
In Stock150mm Shock Absorbing Swivel Castor, 360kg Capacity | Polyurethane Tyre Wheel, Ball bearing (KGDSP150ASFMUD)
Original price was: £123.23.£65.49Current price is: £65.49. Sale!150mm Shock absorbing (14mm Compression) Swivel... Read More castor and Polyurethane Tyred Aluminium Wheel. Load Capacity = 360kg
For the compression performance, please see the image for the curve by clicking on the thumbnail image above. To use this curve, please calculate the weight being carried by this castor and divide that by the one less than the number of castors on your equipment, So if you have a trolley using 4 of these castors and the total weight being carried is 500kg, then the compression of the rubber pad is the reading given on the y axis at 167kg (500kg / 3 = 167kg) which is between 11 and 12mm.
-
In Stock150mm Swivel Castor, 500kg Capacity | Nylon Wheel, Roller Bearing (622NYB)
£37.84150mm Top Plate Swivel Castor (Pressed Steel) with... Read More 105x80 Hole Centres. Nylon Wheel with Roller Bearing. Load Capacity = 500kg -
In StockSwivel Castor, 250kg Capacity | 100mm Cast Iron Wheel with Roller Bearing (422CIB)
£31.84100mm Swivel Castor (Flexello) with 80x60mm Fixing... Read More Bolt Hole Centres. This Pressed Steel Castor is Fitted with Cast Iron Wheel with Roller Bearing. 250kg Load Capacity
-
In Stock100mm Stainless Steel Swivel Castor, 150kg Capacity | Nylon Wheel, Plain Bore (MSS100NY)
£17.71100mm Top Plate Swivel Castor (Stainless Steel Cas... Read Moretor) with 80x60mm Fixing Hole Centres. This castor has a White Nylon Wheel with a Smooth Plain Bore. The Load Capacity is 150kg using manual propulsion at 4km/m (walking Speed). Key Specifications- Top Plate Size: 100x85mm
- Bolt Hole Centres: 80x60mm
- Bolt Hole Size: 8.5x12mm (suits 8mm Fixing Bolts)
- Offset: 37mm
- Overall Height: 128mm
- Stainless Steel Grade: AISI 304
-
In Stock125mm Swivel Castor, 200kg Capacity | Nylon Wheel, Ball Bearing (MSV125NY2B)
£10.98125mm White Nylon Wheel with a ball bearing fit... Read Moreted into a pressed steel swivel castor bracket. The Swivel Bracket has a 4 hole top plate with 80x60mm bolt hole spacing. The load capacity of this castor is 200kg using manual propulsion at 4km/h (walking speed)
The Nylon Wheel is a hard wheel giving it a low tractive resistance which makes it it easier to get moving compared with softer rubber tread wheels. The strength of nylon and because it wont damage concrete floors makes it one of the most popular choices. The ball bearing lowers the rolling resistance to reduce the effort required to move the castors. Put this wheel into a strong bracket that has a double ball race in the swivel head makes this castor a great choice for the widest range of industrial and domestic applications.</p>
-
In Stock160mm Swivel Castor, 300kg Capacity | Rubber Tyre Wheel, Ball Bearing (MSK160RN2B)
£37.26160mm Top Plate Swivel Castor (Pressed Steel) with... Read More 105x80mm Fixing Bolt Hole Centres. Blue Elastic Rubber Tyre on a Black Nylon Centre Wheel with Ball Bearings. Load Capacity = 300kg. Blue elastic rubber tyres are gentle on floors and non-marking. They are a popular choice when a castor with a rubber tyre is needed but the weight to be carried is heavier than what a castor with a standard rubber tyre wheel can hold.
-
In Stock100mm Swivel Castor with 27mm to 30mm Round Expander Fitting, 100kg Capacity | Rubber Tyre Wheel (194559)
Original price was: £13.49.£8.10Current price is: £8.10. Sale!100mm Grey Therm... Read Moreoplastic Rubber Tyre Wheel on a nylon centre fitted into a 10mm Single Bolt Hole Swivel Castor (Pressed Steel Frame) complete with a 27mm - 30mm Round Expander. The swivel head has a double ball race and the load capacity of this castor is 100kg using manual propulsion at 4km/h. The expander fitting is designed to fit into an round hollow tube with an internal diameter of 27mm to 30mm. This castor is fitted with a grey rubber tyre that will not mark or damage the floor and is ideal for most general, light duty castor purposes such as trolley castors or dolly castors. The Ball Bearing in the wheel provides excellent rolling performance. -
In Stock100mm Swivel Castor, 150kg Capacity | Nylon Wheel, Ball Bearing, (1321788)
£9.55100mm Bolt Hole Swivel Castor (Pressed Steel) with... Read More 10mm Bolt Hole. Nylon Wheel with Ball Bearing. Load Capacity = 150kg -
In Stock63mm Footmaster Levelling Castor, 500kg Capacity | 63mm Nylon Wheel (KGDR-80F)
£65.0763mm Footmaster Levelling Castor with Top Plate Fi... Read Moretting. 500kg Static and 250kg Dynamic Load Capacity Die Cast Aluminium Foot Pad With Vibration Damping Rubber Pad. Nylon Handwheel with Retractable Ratchet. The Footmaster levelling castor is a multi-functional swivel castor that provides mobility, levelling and anti-vibration functions. This allows users to move and position large equipment into place with added stability using the levelling and anti-vibration features. Because of the lifting and lowering function of the Foot Master castor, like all Jacking Castors, it is important understand that each castor may be subjected to HALF THE TOTAL WEIGHT. Therefore, the recommended load capacity for each Foot Master Levelling Castor is half the castor's Static Load Capacity, that is, when the castors' levelling function is not being used. The load capacity of the Footmaster Castor when it is being moved and levelled is given by the Dynamic Load Capacity. -
In Stock160mm Swivel Castor, 200kg Capacity | Rubber Tyre Wheel, Roller Bearing (MSVH160RN1B)
£23.23160mm Single Bolt Hole (12mm) Swivel Castor (Press... Read Moreed Steel). Blue Rubber Tyred / Nylon Centre Wheel with Roller Bearing. Load Capacity = 200kg -
In Stock200mm Swivel Castor, 350kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (MSV200PN2B)
£36.66200mm Top Plate Swivel Castor (Pressed Steel) with... Read More 105x80 Hole Centres. Polyurethane Tyre / Nylon Centre Wheel with ball bearing. Load Capacity = 350kg
