- Sorry, this product cannot be purchased.
Swivel Castors
Swivel Castors and wheels can swivel 360 degrees about the vertical axis (see figure below). They consist of a housing and a caster wheel. The housing itself is made up of a plate fitting, swivel bearings and a yoke. The Yoke is often referred to as the castor's frame (see figure below).The plate fitting determines how the... castor is going to be attached to the equipment. It is usually either a single bolt hole fitting or a plate fixing which is generally square, rectangular or triangular. Plate fittings are usually bolted to equipment so knowing your required bolt hole centres is important. The Swivel Head consists of a ball race and a number of ball bearings that roll within it. Swivel Castors can either have a single ball race or a double ball race. They perform the same function. The double ball race was developed for medium and heavy applications. This is because they are compact, perform well under static and dynamic loads and provide excellent steerability.
Swivel castors can be fitting with locks which lock (brake) wither the wheel or the swivel head or both. See Brake Castors.
Swivel Castor Components
Swivel Castor Offset
The Swivel Castor's offset it the distance from the swivel axis to the centre of the wheel (where it is secured to the castor frame). It is the reason a swivel castor will go in the direction you want it to go regardless its starting direction. The offset and castor wheel's diameter make up the swivel radius where the swivel radius = Offset + (Wheel Diameter / 2).
This is the radius of circle described but the outer dimension of the wheel swivelling around the vertical axis. Basically, this is important because it tells you how much room is needed for the swivel caster to swivel. Furthermore, the general rule is the bigger the offset the better the castor's running performance but the lower the weight it can carry. Read More
- Display 15 Products per page
-
In Stock125mm Swivel Castor, 150kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (MSVH125PN1B)
£10.86125mm Single Bolt Hole (12mm) Swivel Castor (Press... Read Moreed Steel). Polyurethane Tyred / Nylon Centred Wheel with Roller Bearing. Load Capacity = 150kg -
In Stock42mm Footmaster Levelling Castor, Plate Fitting, 60kg Capacity | 42mm Nylon Wheel (KGD-40F)
£21.8242mm Foot Master Levelling Castor with an ivory co... Read Moreloured powder coating finish. This product has a 4-hole top plate with 42mm x 42mm bolt hole centres and is also powder coated for added protection. The wheel is made from premium quality black Nylon with a 20mm Tread width and the Die Cast Aluminium Foot Pad has a rubber vibration damping pad. This foot pad has a Nylon Hand-wheel operation This product's load capacity has increased to 60kg Static Load and 30kg Dynamic Load. Because of the lifting and lowering function of the Foot Master castor, like all Jacking Castors, it is important understand that each castor may be subjected to HALF THE TOTAL WEIGHT. Therefore, the recommended load capacity for each Foot Master Levelling Castor is half the castor's Static Load Capacity, that is, when the castors' levelling function is not being used. The load capacity of the Footmaster Castor when it is being moved and positioned is given by the Dynamic Load Capacity. This levelling castor is a multi-functional swivel castor that provides mobility, levelling and anti-vibration functions. This allows users to move and position large equipment into place with added stability using the levelling and anti-vibration features. -
In Stock100mm Swivel Castor, 270kg Capacity | Nylon Wheel, Ball Bearing (KSMG100NYB)
£33.02100mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith a 4 hole top plate fitting and 105x80mm Bolt Hole Centres. This castor houses a Nylon Wheel with Ball Bearing. Load Capacity = 270kg using manual propulsion at 4km/h (walking speed), Key Specifications and Features:- Top Plate Size: 140x110mm
- Bolt Hole Centres: Slotted 114x87mm / 97.5x71.5mm
- Fixing Bolt Size: 12mm
- Overall Height: 143mm
- Offset: 35mm
- Bearing Type: Ball Bearing
- Load Capacity: 270kg (manual propulsion at 4km/h)
- Nylon castor wheels have a high load capacity at a low cost. They are maintenance free and extremely resistant to water, salts, greases, acids and alkalis
-
In Stock65mm Compact Twin Wheel Swivel Castor, 250kg Capacity | Polyurethane Tyre Wheel, Ball bearing (2KS065PT2B)
£26.5065mm Low Level twin wheel swivel castor with 105x8... Read More0mm Top Plate and 80/76x60mm Fixing Bolt Hole Centres. This Low Level compact castor has an overall height of 86.5mm and an Orange Polyurethane Wheel on a steel centre with a 2x22mmTread Width (49mm across both wheels) and Ball bearings. Load Capacity = 250kg. The swivel head has a double ball race for excellent swivelling and the polyurethane tyres have a 95 Shore A hardness. -
In Stock250mm Swivel Castor, 1150kg Capacity | Polyurethane Tyre Wheel, Ball bearing (HKS25025241)
£158.09250mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith 105x80mm Fixing Bolt Hole Centres and an overall height of 303mm. The castor wheel has a Polyurethane Tyre and a Cast Iron Centre Wheel with Ball bearings. The Load Capacity is 1150kg using manual propulsion at 4km/h. -
In Stock60mm Swivel Castor, 120kg Capacity | Nylon Wheel, Plain Bore (MSVH060NY0B)
£8.9860mm Single Bolt Hole Swivel Castor to suit 12m... Read Morem bolt. The castor bracket is made from pressed steel and houses a solid nylon Wheel with a plain bore (without a bearing).
This castor's load capacity is rated to 120kg using manual propulsion at 4km/h making it a great castor choice for most applications that require a small castor.
This single bolt hole castor can be fitted with an expander fitting and requires a ACZ500 bolt hole reducer to reduce the 12mm bolt hole to a 10mm bolt hole to fit the expander fitting's bolt that is 10mm.
-
In Stock125mm Swivel Castor, 300kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (561PNB)
£36.25125mm Top Plate Swivel Castor (Pressed Steel) with... Read More 140x105 Hole Centres. Polyurethane Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 300kg -
In Stock200mm Swivel Castor, 800kg Capacity, Nylon Wheel, Ball Bearing (KS200NYBJ800)
£81.48200mm Swivel Castor (Heavy Duty Pressed Steel) wit... Read Moreh a 135mm x 110mm Top Plate and 105x80mm Fixing Bolt Hole spacings. The castor wheel is a Solid White Nylon with two shielded ball bearings. Load Capacity = 800kg- The castor wheel is a heavy-duty polyamide 6 (usually referred to as nylon) wheel with shielded ball bearing and is not affected by water.
- Being a hard tread it offers the lowest rolling resistance and easiest mobility.
- This castor is a popular choice in a wide variety of heavy-duty applications and the Nylon wheel will not damage or mark concrete floors
- The castor wheel is a heavy-duty polyamide 6 (usually referred to as nylon) wheel with shielded ball bearing and is not affected by water.
-
In Stock100mm Swivel Castor, 150kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (MSK100PN1B)
£13.12100mm Top Plate Swivel Castor (Pressed Steel) with... Read More 80x60 Hole Centres. Polyurethane Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 150kg -
In StockSwivel Castor, 1000kg Capacity | 150mm Polyurethane Tyre Wheel, Ball bearing, (K2ST150PC2B)
£301.24150mm Twin Wheel Extra Heavy Duty Fabricated Sw... Read Moreivel Castor. The swivel head turns on thrust and taper roller bearings for extra strength and the bracket is finished in black epoxy paint.
This castor has a top plate measuring 170mm x 170mm with bolt hole spacings of 130mm x 130mm drilled to 13mm diameter. The two Polyurethane Tyre on a Cast Iron Centre wheels each have ball bearings fitted to reduce the rolling resistance.
The castor has a 1000kg Load Rating at 4km/h
-
In Stock150mm Swivel Castor, 300kg Capacity | Rubber Tyre Wheel, Ball Bearing (KSMG150EAB)
£38.67150mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith 105x80mm Fixing Bolt Hole Centres. Black Rubber Tyre on an Aluminium Centre Wheel with Ball Bearings. Load Capacity = 300kg -
In Stock100mm Swivel Castor, 150kg Capacity | Rubber Tyre Wheel, Roller Bearing (MSVH100RN1B)
£9.53100mm Blue Elastic Rubber Tyre wheel on a nylon... Read More centre with a roller bearing fitted into a pressed steel single bolt hole swivel castor bracket to suit a 12mm bolt. The load capacity of this castor is 150kg using manual propulsion at 4km/h (walking speed)
The Blue Elastic Rubber Tyre offers a higher load capacity than standard grey or black rubber tyres and is non-marking, gentle on floors and the rubber absorbs vibrations whilst in motion making this a low noise option. The roller bearing lowers the rolling resistance to reduce the effort required to move the castors. Together with the strong bracket that has a double ball race in the swivel head makes this castors a truly great performer.
-
In Stock75mm Swivel Castor, 90kg Capacity | Rubber Tyre Wheel, Plain Bore (361RNST)
£15.7175mm Stem Fitting Swivel Castor (Flexello 61 Se... Read Moreries) with M12x25mm Threaded Stem. Blue Rubber Tyre Wheel with a Nylon Centre and Plain Bore. The Load Capacity of this castor is 90kg at 4km/h using manual propuslion.
The Flexello 61 Series is an established industry standard range of Pressed Steel Castors that is suitable for most industrial or domestic applications. This range has a ball bearing swivel head and finished with a bright zinc plating.
-
Out of Stock - On the Way300mm Swivel Castor, 680kg Capacity | Rubber Tyre Wheel, Ball bearing (HKS30025341)
£165.39300mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith 105x80 Hole Centres. Rubber Tyre / Cast Iron Centre Wheel with Ball bearing. Load Capacity = 680kg -
In Stock100mm Swivel Castor, 600kg Capacity | Polyurethane Tyre Wheel, Ball bearing (GXT100ASFHUD)
Original price was: £269.44.£169.22Current price is: £169.22. Sale!100mm Polyure... Read Morethane tyre Wheel with an aluminium centre is fitted into an extra strong Fabricated Top Plate Swivel Castor with 80x60mm bolt hole centres. The load capacity of this castor is 600kg at 4km/h
This high performance castor is fitted with a quality Polyurethane tyre Wheel with an aluminium centre that will not mark the floor. An extra strong welded castor frame that is powder coated and fitted with a high performance castor wheel containing two ball bearings that turns on a specially designed integrated axle shaft arrangement makes this castor one of the most durable in the market. Perfect for moving very heavy loads where strength, durability and performance are critical.
The double thrust bearing in the swivel head optimise heavy loads
