Braked Castors

Home / Castors / Braked Castors

Braked Castors

Braked Castors

Braked Castors

Braked Castors are sometimes referred to as lockable castors and it is usually swivel castors that have brakes. The Brake can lock either the wheel (Wheel Brake), the swivel head (Directional Lock), or both simultaneously (Total Stop or Swivel & Wheel Brake). It is un...common to find a fixed castor with a brake. Our GD Series of shock absorbing castors is one of the few that do. See GDS Shock Absorbing Castors here.

Braked Castors can swivel the wheel 360 degrees about the vertical axis. They consist of a housing with a lockable brake and a caster wheel. The housing itself is made up of a plate fitting, swivel bearings and a yoke. The Yoke is often referred to as the castor’s frame or bracket.

The plate fitting determines how the castor is going to be attached to the equipment. It is usually either a single bolt hole fitting or a plate fixing which is generally square, rectangular or triangular. Plate fittings are usually bolted to equipment so knowing your required bolt hole centres is important. The Swivel Head consists of a ball race and a number of ball bearings that roll within it. Braked Castors, like Swivel Castors, can either have a single ball race or a double ball race. They perform the same function. The double ball race was developed for medium and heavy applications. This is because they are compact, perform well under static and dynamic loads and provide excellent steerability.

Braked Castor Offset


The Braked Castor’s offset it the distance from the swivel axis to the centre of the wheel (where it is secured to the castor frame). It is the reason any swivelling castor will go in the direction you want it to go regardless its starting direction. Read More

We stock a complete range of Braked castors and their associate Fixed and Swivel Castors (where available). Our ranges come with a wide variety of top plate sizes and fixing bolt hole centres.

The ranges include pressed steel, Stainless Steel and Fabricated or welded castor housings.

A castor’s size is usually referred to by the wheel’s diameter. The most common sizes are 40mm, 50mm, 75mm, 80mm, 100mm, 125mm, 150mm, 160mm, 200mm, 250mm and 300mm. These are the wheel sizes and because the swivel head sits above the caster wheel, the castor’s overall height will be somewhat larger than the wheel. We’ve had some customers purchase a 100mm Castor expecting it to be 100mm tall, it’s not, it’s usually around 128mm tall.

Each Braked Castor can have a wide range of castor wheels. Nylon, Polypropylene, Rubber Tyre, Elastic Rubber Tyre, Polyurethane Tyres and Cast Iron Wheels are the most common.

Have a question? Get in touch today!

Email us at [email protected], phone us on 0121 772 1010 or click get in touch below!

Get in touch
Midlands

(Warehouse & Trade Counter)
Unit 1, St Andrews Trading Estate,
111 Great Barr Street,
BIRMINGHAM,
B9 4BB

Tel: +44(0) 121 772 1010
Email: [email protected]
Fax: 0121 773 1103

North

(Sales Office Only)
Unit 5, Paul House,
Stockport Road, Timperley,
CHESHIRE,
WA15 7UQ

Tel: +44(0) 161 865 3800
Email: [email protected]
Fax: 0161 865 3400

Keystone Wood Ltd T/A Keystone Castor Company | Registered in England No. 541197 | VAT Registration No. 559034041
© 2004 – 2024 Keystone Castor Company.

Search Products

Load Capacity
Bracket Type
Brake
Fixing Type
Bracket Material
Fixing Centres
Wheel Diameter
Wheel Tread Material
Bearing Type
Hub Length
Bore
Thread
Stem
Search
Reset Form
Quick Search