Accessories and Fittings
- Sort by Popularity (sales)
- Display 15 Products per page
In StockM12 x 40mm High Tensile Steel Bolt, Nut & Washer Set (BOLTSETM12X40)
£2.894 pack of M12 x 40mm High Tensile Steel Bolt, Nut ... Read More(nyloc), and Washer sets to fix your castors to your equipment. Nyloc Nuts contain a nylon insert that grips onto the bolt and prevents the nut from loosening due to the vibration that occurs when the castor wheel is moving. The pack contains:- (Qty 4) M12 x 40mm Threaded Bolts Grade 8.8 Hex Set finished in Bright Zinc Plate (BZP).
- (Qty 4) M12 Nylon Insert (Nyloc) Nuts (14mm Height) with BZP finish.
- (Qty 4) M12 Washers (24mm outside diameter, 13mm inside diameter, 2.7mm thick) with BZP finish.
- In Stock
Directional Lock for Revvo H Series Castors (9999-0181)
Original price was: £22.01.£20.64Current price is: £20.64.Sale!Retro-fit Directional Lock for the H Series Swivel... Read More Castor (4-Way Directional Lock). Converts any Revvo H Series 'swivel only' castor into fixed for straight line travel. Insert the fixing bolt through both the directional lock bolt holes and the castors bolt holes when fitting to equipment. Because of this, it in effect, shortens your bolt length by 4mm (the thickness of the D-lock).PLEASE NOTE: This product should not be used with castor with a foot because the brake makes contact with the Directional Lock and affects the swivel action. It can be used with a side mounted wheel lock. - In Stock
Retaining Washer 7/16″ (STARLOCKWASHER7/16)
£0.397/16 Inch Domed (Capped) Wheel Retainer suitable f... Read Moreor attaching wheels to a 7/16 Inch axle . - In Stock
Expander Fitting, Round Tube, 31mm to 35mm (WR0731/35)
£6.02Round Expander Fitting to suit round tube with int... Read Moreernal diameter from 31mm to 35mm. 10mm bolt included. If fitting through a 12mm single bolt hole castor, please purchase ACZ500 to reduce the Bolt Hole to 10mm. - In Stock
Headed Spacer 20mm x 12mm x 1.5mm (sold in pairs) (2XKHSE)
£3.46A set of two machined steel top hat headed spacers... Read More to fit that fit into 20mm ball bearings to reduce the bearing bore to 12mm.The diameter of the top hat section is 25mm which has a 1.5mm thick shoulder that increases the wheel's hub length (the distance through the central bore) by 1.5mm each side of the wheel (3mm total increase to the hub length).The total length of the product is 18mm. - In Stock
6304-2RS Sealed Ball Bearing 20mm x 52mm x 15mm (6304RS)
£4.01Ball Bearings with an inside diameter of 20mm, an ... Read Moreoutside diameter of 52mm, and a width of 15mm.The rubber seals on the ball bearing protect the ball bearings from dirt ingress and also helps with lubricant retention. - In Stock
Teflon Wheel Tube: 15mm OD x 8mm ID x 49mm Length (TEFLONTUBE49158MM)
£2.43Teflon wheel tube to reduce a 15mm bore to 8mm bor... Read Moree.This tube has a 15mm Outside Diameter x 8mm Inside Diameter and 49mm Long to suit a wheel with a 15mm bore and 48mm hub length. - In Stock
16mm | 13mm Bolt Hole reducer Fitting (ACZ600)
£0.54Reducing insert for 16mm Single Bolt hole castors ... Read Moreto reduce the bolt hole size to 13mm to suit a 12mm Fixing Bolt. - In Stock
Teflon Wheel Tube: 12mm OD x 8.2mm ID x 42mm Length (TEFLONTUBE421282)
£3.27Teflon wheel tube to reduce a 12mm bore to 8.2mm b... Read Moreore.This tube has a 12mm Outside Diameter x 8.2mm Inside Diameter and 42mm Long to suit a wheel with a 12mm bore and 40mm hub length.This product has a stainless steel core with a Teflon coating.Suitable for high temperatures: -40 degrees to +280 Degrees Celsius - In Stock
6304-Z Sealed Ball Bearing 20mm x 52mm x 15mm (6304Z)
£4.01Ball Bearings with an inside diameter of 20mm, an ... Read Moreoutside diameter of 52mm, and a width of 15mm.The metal seals on the ball bearing protect the ball bearings from dirt ingress and also helps with lubricant retention. - In Stock
Directional Lock for 2HK Series Castors (HKDL)
£27.77Retro-fit Directional Lock for the 2HK Series Swiv... Read Moreel Castor (4-Way Directional Lock). Converts the following 'swivel only' castor into fixed for straight line travel. Insert the fixing bolt through both the directional lock bolt holes and the castors bolt holes when fitting to equipment:
