Accessories and Fittings
- Display 15 Products per page
In StockTeflon Wheel Tube: 15mm OD x 8mm ID x 49mm Length (TEFLONTUBE49158MM)
£2.34Teflon wheel tube to reduce a 15mm bore to 8mm bor... Read Moree.This tube has a 15mm Outside Diameter x 8mm Inside Diameter and 49mm Long to suit a wheel with a 15mm bore and 48mm hub length.- In Stock
Expander Fitting, Square Tube, 19mm to 21.5mm (WR4719/21.5)
£2.77Square Expander Fitting to suit square tube with i... Read Morenternal diameter from 19mm to 21.5mm. 10mm bolt included. If fitting through a 12mm single bolt hole castor, please purchase ACZ500 to reduce the Bolt Hole to 10mm. - In Stock
M12 x 40mm High Tensile Steel Bolt, Nut & Washer Set (BOLTSETM12X40)
£2.794 pack of M12 x 40mm High Tensile Steel Bolt, Nut ... Read More(nyloc), and Washer sets to fix your castors to your equipment. Nyloc Nuts contain a nylon insert that grips onto the bolt and prevents the nut from loosening due to the vibration that occurs when the castor wheel is moving. The pack contains:- (Qty 4) M12 x 40mm Threaded Bolts Grade 8.8 Hex Set finished in Bright Zinc Plate (BZP).
- (Qty 4) M12 Nylon Insert (Nyloc) Nuts (14mm Height) with BZP finish.
- (Qty 4) M12 Washers (24mm outside diameter, 13mm inside diameter, 2.7mm thick) with BZP finish.
- In Stock
Expander Fitting, Square Tube, 21.5mm to 24mm (WR4721.5/24)
£2.93Square Expander Fitting to suit square tube with i... Read Morenternal diameter from 21.5mm to 24mm. 10mm bolt included. If fitting through a 12mm single bolt hole castor, please purchase ACZ500 to reduce the Bolt Hole to 10mm. - In Stock
Headed Spacer 15mm x 10mm x 2mm (sold in pairs) (2XKHSA)
£2.98A set of two machined steel top hat headed spacers... Read More to fit that fit into 15mm ball bearings to reduce the bearing bore to 10mm.The diameter of the top hat section is 20mm which has a 2mm thick shoulder that increases the wheel's hub length (the distance through the central bore) by 2mm each side of the wheel (4mm total increase to the hub length).The total length of the product is 15mm. - Out of Stock - On the Way
Teflon Wheel Tube: 20mm OD x 8mm ID x 49mm Length (TEFLONTUBE49208)
£3.00Teflon wheel tube to reduce a 20mm bore to 8mm bor... Read Moree.This tube has a 20mm Outside Diameter x 8mm Inside Diameter and 49mm Long to suit a wheel with a 20mm bore and 48mm hub length. - In Stock
Expander Fitting, Round Tube, 24mm to 27mm (WR0724/27)
£3.08Round Expander Fitting to suit round tube with int... Read Moreernal diameter from 24mm to 27mm. 10mm bolt included. If fitting through a 12mm single bolt hole castor, please purchase ACZ500 to reduce the Bolt Hole to 10mm. - In Stock
Expander Fitting, Round Tube, 19mm to 21.5mm (WR0719/21.5)
£3.08Round Expander Fitting to suit round tube with int... Read Moreernal diameter from 19mm to 21.5mm. 10mm bolt included. If fitting through a 12mm single bolt hole castor, please purchase ACZ500 to reduce the Bolt Hole to 10mm. - In Stock
Expander Fitting, Round Tube, 21.5mm to 24mm (WR0721.5/24)
£3.08Round Expander Fitting to suit round tube with int... Read Moreernal diameter from 21.5mm to 24mm. 10mm bolt included. If fitting through a 12mm single bolt hole castor, please purchase ACZ500 to reduce the Bolt Hole to 10mm. - In Stock
Expander Fitting, Square Tube, 24mm to 27mm (WR4724/27)
£3.11Square Expander Fitting to suit square tube with i... Read Morenternal diameter from 24mm to 27mm. 10mm bolt included. If fitting through a 12mm single bolt hole castor, please purchase ACZ500 to reduce the Bolt Hole to 10mm. - In Stock
Castor Fixing Plate 80mm x 60mm Bolt Hole Centres (PLATE100x85)
£3.22Our un-plated castor fixing plate is made for you ... Read Moreto weld / attach to your equipment to give you a suitable base to attach your castor.The plate measures 100x85mm and is 3mm thick. It comes with 4 diagonally slotted bolt fixing holes with 80mm x 60mm, or, 75mm x 45mm bolt hole centres. Each hole measures 9mm x 16mm and suits 8mm bolts.You can purchase the fixing bolts here - In Stock
Headed Spacer 20mm x 12mm x 1.5mm (sold in pairs) (2XKHSE)
£3.34A set of two machined steel top hat headed spacers... Read More to fit that fit into 20mm ball bearings to reduce the bearing bore to 12mm.The diameter of the top hat section is 25mm which has a 1.5mm thick shoulder that increases the wheel's hub length (the distance through the central bore) by 1.5mm each side of the wheel (3mm total increase to the hub length).The total length of the product is 18mm. - In Stock
Expander Fitting, Round Tube, 27mm to 30mm (WR0727/30)
£3.55Round Expander Fitting to suit round tube with int... Read Moreernal diameter from 27mm to 30mm. 10mm bolt included. If fitting through a 12mm single bolt hole castor, please purchase ACZ500 to reduce the Bolt Hole to 10mm. - In Stock
6304-Z Sealed Ball Bearing 20mm x 52mm x 15mm (6304Z)
£3.87Ball Bearings with an inside diameter of 20mm, an ... Read Moreoutside diameter of 52mm, and a width of 15mm.The metal seals on the ball bearing protect the ball bearings from dirt ingress and also helps with lubricant retention. - In Stock
6304-2RS Sealed Ball Bearing 20mm x 52mm x 15mm (6304RS)
£3.87Ball Bearings with an inside diameter of 20mm, an ... Read Moreoutside diameter of 52mm, and a width of 15mm.The rubber seals on the ball bearing protect the ball bearings from dirt ingress and also helps with lubricant retention.
