Accessories and Fittings
- Display 15 Products per page
In StockExpander Fitting, Round Tube, 27mm to 30mm (WR0727/30)
£3.68Round Expander Fitting to suit round tube with int... Read Moreernal diameter from 27mm to 30mm. 10mm bolt included. If fitting through a 12mm single bolt hole castor, please purchase ACZ500 to reduce the Bolt Hole to 10mm.- In Stock
Headed Spacer 20mm x 12mm x 1.5mm (sold in pairs) (2XKHSE)
£3.46A set of two machined steel top hat headed spacers... Read More to fit that fit into 20mm ball bearings to reduce the bearing bore to 12mm.The diameter of the top hat section is 25mm which has a 1.5mm thick shoulder that increases the wheel's hub length (the distance through the central bore) by 1.5mm each side of the wheel (3mm total increase to the hub length).The total length of the product is 18mm. - In Stock
Expander Fitting, Round Tube, 24mm to 27mm (WR0724/27)
£3.19Round Expander Fitting to suit round tube with int... Read Moreernal diameter from 24mm to 27mm. 10mm bolt included. If fitting through a 12mm single bolt hole castor, please purchase ACZ500 to reduce the Bolt Hole to 10mm. - In Stock
Headed Spacer 15mm x 10mm x 2mm (sold in pairs) (2XKHSA)
£3.09A set of two machined steel top hat headed spacers... Read More to fit that fit into 15mm ball bearings to reduce the bearing bore to 10mm.The diameter of the top hat section is 20mm which has a 2mm thick shoulder that increases the wheel's hub length (the distance through the central bore) by 2mm each side of the wheel (4mm total increase to the hub length).The total length of the product is 15mm. - In Stock
6304-Z Sealed Ball Bearing 20mm x 52mm x 15mm (6304Z)
£4.01Ball Bearings with an inside diameter of 20mm, an ... Read Moreoutside diameter of 52mm, and a width of 15mm.The metal seals on the ball bearing protect the ball bearings from dirt ingress and also helps with lubricant retention. - In Stock
Steel Wheel Tube: 15mm OD x 10.8mm ID x 49mm Length (TUBE2662110)
£1.37Steel wheel tube to reduce a 15mm bore to 10.8mm b... Read Moreore to suit an M10 Bolt.This steel tube has a 15mm Outside Diameter x 10.8mm Inside Diameter and 49mm Long to suit a wheel with a 15mm bore and 48mm hub length. - In Stock
Directional Lock for Revvo H Series Castors (9999-0181)
Original price was: £22.01.£20.64Current price is: £20.64.Sale!Retro-fit Directional Lock for the H Series Swivel... Read More Castor (4-Way Directional Lock). Converts any Revvo H Series 'swivel only' castor into fixed for straight line travel. Insert the fixing bolt through both the directional lock bolt holes and the castors bolt holes when fitting to equipment. Because of this, it in effect, shortens your bolt length by 4mm (the thickness of the D-lock).PLEASE NOTE: This product should not be used with castor with a foot because the brake makes contact with the Directional Lock and affects the swivel action. It can be used with a side mounted wheel lock. - In Stock
Retaining Washer 25.4mm (1 Inch) (1″STARLOCKWASHER)
£1.7225.4mm (1 Inch) Domed (capped) Wheel Retaining Was... Read Moreher suitable for attaching wheels to a 1 Inch axle . - In Stock
Retaining Washer 10mm – Uncapped (STARLOCKWASHER10)
£0.2110mm Wheel Retaining Washer. Uncapped Push on fastener for 10mm axle shaft. - In Stock
Retaining Washer 25m (STARLOCKWASHER25)
£1.7225mm Domed (Capped) Wheel Retainer suitable for at... Read Moretaching wheels to a 25mm axle . - In Stock
Expander Fitting, Square Tube, 27mm to 30mm (WR4727/30)
£4.07Square Expander Fitting to suit square tube with i... Read Morenternal diameter from 27mm to 30mm. 10mm bolt included. If fitting through a 12mm single bolt hole castor, please purchase ACZ500 to reduce the Bolt Hole to 10mm. - In Stock
6204-2RS Sealed Ball Bearing 20mm x 47mm x 14mm (62042RS)
£2.17Ball Bearings with an inside diameter of 20mm, an ... Read Moreoutside diameter of 47mm, and a width of 14mm.The rubber seals on the ball bearing protect the ball bearings from dirt ingress and also helps with lubricant retention. - In Stock
Castor Fixing Plate 80mm x 60mm Bolt Hole Centres (PLATE100x85)
£3.34Our un-plated castor fixing plate is made for you ... Read Moreto weld / attach to your equipment to give you a suitable base to attach your castor.The plate measures 100x85mm and is 3mm thick. It comes with 4 diagonally slotted bolt fixing holes with 80mm x 60mm, or, 75mm x 45mm bolt hole centres. Each hole measures 9mm x 16mm and suits 8mm bolts.You can purchase the fixing bolts here - In Stock
Steel Wheel Tube: 12mm OD x 8mm ID x 41mm Length (TUBE2802900)
£1.17Steel wheel tube to reduce a 12mm bore to 8.5mm bo... Read Morere to suit an M8 Bolt.This steel tube has a 12mm Outside Diameter x 8.5mm Inside Diameter and 41mm Long to suit a wheel with a 12mm bore and 40mm hub length. - In Stock
Retaining Washer 20mm (STARLOCKWASHER20)
£1.7220mm Domed (Capped) Wheel Retainer suitable for at... Read Moretaching wheels to a 20mm axle .
