Accessories and Fittings
- Display 15 Products per page
- In Stock
Steel Wheel Tube: 12mm OD x 8mm ID x 41mm Length (TUBE2802900)
£1.13Steel wheel tube to reduce a 12mm bore to 8.5mm bo... Read Morere to suit an M8 Bolt.This steel tube has a 12mm Outside Diameter x 8.5mm Inside Diameter and 41mm Long to suit a wheel with a 12mm bore and 40mm hub length. - In Stock
Teflon Wheel Tube: 15mm OD x 8mm ID x 49mm Length (TEFLONTUBE49158MM)
£2.34Teflon wheel tube to reduce a 15mm bore to 8mm bor... Read Moree.This tube has a 15mm Outside Diameter x 8mm Inside Diameter and 49mm Long to suit a wheel with a 15mm bore and 48mm hub length. - Out of Stock - On the Way
Teflon Wheel Tube: 20mm OD x 8mm ID x 49mm Length (TEFLONTUBE49208)
£3.00Teflon wheel tube to reduce a 20mm bore to 8mm bor... Read Moree.This tube has a 20mm Outside Diameter x 8mm Inside Diameter and 49mm Long to suit a wheel with a 20mm bore and 48mm hub length. - In Stock
Steel Wheel Tube: 15mm OD x 10.8mm ID x 49mm Length (TUBE2662110)
£1.32Steel wheel tube to reduce a 15mm bore to 10.8mm b... Read Moreore to suit an M10 Bolt.This steel tube has a 15mm Outside Diameter x 10.8mm Inside Diameter and 49mm Long to suit a wheel with a 15mm bore and 48mm hub length. - In Stock
Retaining Washer 10mm – Uncapped (STARLOCKWASHER10)
£0.2010mm Wheel Retaining Washer. Uncapped Push on fastener for 10mm axle shaft. - In Stock
M6 x 25mm High Tensile Steel Bolt, Nut & Washer Set (BOLTSETM6X25)
£1.684 pack of M6 x 25mm High Tensile Steel Bolt, Nut (... Read Morenyloc), and Washer sets to fix your castors to your equipment. Nyloc Nuts contain a nylon insert that grips onto the bolt and prevents the nut from loosening due to the vibration that occurs when the castor wheel is moving. The pack contains:- (Qty 4) M6 x 25mm Threaded Bolts Grade 8.8 Hex Set finished in Bright Zinc Plate (BZP).
- (Qty 4) M6 Nylon Insert (Nyloc) Nuts (8mm Height) with BZP finish.
- (Qty 4) M6 Washers (12mm outside diameter, 6.4mm inside diameter, 1.8mm thick) with BZP finish.
- In Stock
Retaining Washer 25.4mm (1 Inch) (1″STARLOCKWASHER)
£1.6025.4mm (1 Inch) Domed (capped) Wheel Retaining Was... Read Moreher suitable for attaching wheels to a 1 Inch axle . - In Stock
Retaining Washer 20mm (STARLOCKWASHER20)
£1.6620mm Domed (Capped) Wheel Retainer suitable for at... Read Moretaching wheels to a 20mm axle . - In Stock
Steel Wheel Tube: 12mm OD x 8mm ID x 46mm Length (2731-0042)
£1.27Steel wheel tube to reduce a 12mm bore to 8mm. Thi... Read Mores steel tube has a 12mm Outside Diameter x 8.2mm Inside Diameter and is 46mm Long to suits an M8 bolt.The tube is to suit a castor wheel with a 12mm bore and 45mm hub length. - In Stock
Steel Wheel Tube: 20mm OD x 12mm ID x 59mm Len (TUBE205912)
£1.95Steel wheel tube to reduce a 20mm bore to 12mm. Th... Read Moreis steel tube is 59mm Long and has a 20mm Outside Diameter with an internal diameter of 12mm.