- Sorry, this product cannot be purchased.
Accessories and Fittings
- Display 15 Products per page
-
In StockTeflon Wheel Tube: 15mm OD x 8mm ID x 49mm Length (TEFLONTUBE49158MM)
£2.43Teflon wheel tube to reduce a 15mm bore to 8mm bor... Read Moree. This tube has a 15mm Outside Diameter x 8mm Inside Diameter and 49mm Long to suit a wheel with a 15mm bore and 48mm hub length. -
In StockCastor Fixing Plate 105mm x 80mm Bolt Hole Centres (PLATE135x110)
£4.33Our un-plated castor fixing plate is made for y... Read Moreou to weld / attach to your equipment to give you a suitable base to attach your castor.
The plate measures 135x110mm and is 3mm thick. It comes with 4 horizontally slotted bolt fixing holes with 105mm x 80mm bolt hole centres. Each hole measures 11mm x 15mm and suits 10mm bolts.
You can purchase the fixing bolts here
-
In StockSteel Wheel Tube: 20mm OD x 12.5mm ID x 61.5mm Len (TUBE2653010)
£2.02Steel wheel tube to reduce a 20mm bore to 12.5mm. ... Read MoreThis steel tube has a 20mm Outside Diameter x 12.5mm Inside Diameter and 61.5mm Long and suits an M12 bolt. The tube is to suit a castor wheel with a 20mm bore and 60mm hub length. -
In Stock6304-Z Sealed Ball Bearing 20mm x 52mm x 15mm (6304Z)
£4.01Ball Bearings with an inside diameter of 20mm, an ... Read Moreoutside diameter of 52mm, and a width of 15mm. The metal seals on the ball bearing protect the ball bearings from dirt ingress and also helps with lubricant retention. -
In StockExpander Fitting, Square Tube, 19mm to 21.5mm (WR4719/21.5)
£2.87Square Expander Fitting to suit square tube with i... Read Morenternal diameter from 19mm to 21.5mm. 10mm bolt included. If fitting through a 12mm single bolt hole castor, please purchase ACZ500 to reduce the Bolt Hole to 10mm. -
In StockExpander Fitting, Round Tube, 27mm to 30mm (WR0727/30)
£3.68Round Expander Fitting to suit round tube with int... Read Moreernal diameter from 27mm to 30mm. 10mm bolt included. If fitting through a 12mm single bolt hole castor, please purchase ACZ500 to reduce the Bolt Hole to 10mm. -
In Stock6304-2RS Sealed Ball Bearing 20mm x 52mm x 15mm (6304RS)
£4.01Ball Bearings with an inside diameter of 20mm, an ... Read Moreoutside diameter of 52mm, and a width of 15mm. The rubber seals on the ball bearing protect the ball bearings from dirt ingress and also helps with lubricant retention. -
In StockDirectional Lock for Revvo H Series Castors (9999-0181)
Original price was: £22.01.£20.64Current price is: £20.64. Sale!Retro-fit Directional Lock for the H Series Swivel... Read More Castor (4-Way Directional Lock). Converts any Revvo H Series 'swivel only' castor into fixed for straight line travel. Insert the fixing bolt through both the directional lock bolt holes and the castors bolt holes when fitting to equipment. Because of this, it in effect, shortens your bolt length by 4mm (the thickness of the D-lock). PLEASE NOTE: This product should not be used with castor with a foot because the brake makes contact with the Directional Lock and affects the swivel action. It can be used with a side mounted wheel lock.
-
In StockM12 x 40mm High Tensile Steel Bolt, Nut & Washer Set (BOLTSETM12X40)
£2.894 pack of M12 x 40mm High Tensile Steel Bolt, Nut ... Read More(nyloc), and Washer sets to fix your castors to your equipment. Nyloc Nuts contain a nylon insert that grips onto the bolt and prevents the nut from loosening due to the vibration that occurs when the castor wheel is moving. The pack contains:- (Qty 4) M12 x 40mm Threaded Bolts Grade 8.8 Hex Set finished in Bright Zinc Plate (BZP).
- (Qty 4) M12 Nylon Insert (Nyloc) Nuts (14mm Height) with BZP finish.
- (Qty 4) M12 Washers (24mm outside diameter, 13mm inside diameter, 2.7mm thick) with BZP finish.
-
In Stock12mm | 10mm Bolt Hole reducer Fitting (ACZ500)
£0.54Required for 12mm Single Bolt hole castors to redu... Read Morece the bolt hole size to 10mm to suit the Tube Expander Fittings which come with 10mm bolts. -
In Stock16mm | 13mm Bolt Hole reducer Fitting (ACZ600)
£0.54Reducing insert for 16mm Single Bolt hole castors ... Read Moreto reduce the bolt hole size to 13mm to suit a 12mm Fixing Bolt. -
In Stock
Steel Wheel Tube: 15mm OD x 10.8mm ID x 49mm Length (TUBE2662110)
£1.37Steel wheel tube to reduce a 15mm bore to 10.8mm b... Read Moreore to suit an M10 Bolt. This steel tube has a 15mm Outside Diameter x 10.8mm Inside Diameter and 49mm Long to suit a wheel with a 15mm bore and 48mm hub length. -
In StockRetaining Washer 25.4mm (1 Inch) (1″STARLOCKWASHER)
£1.7225.4mm (1 Inch) Domed (capped) Wheel Retaining Was... Read Moreher suitable for attaching wheels to a 1 Inch axle . -
In StockDirectional Lock for 2HK Series Castors (HKDL)
£27.77Retro-fit Directional Lock for the 2HK Series Swiv... Read Moreel Castor (4-Way Directional Lock). Converts the following 'swivel only' castor into fixed for straight line travel. Insert the fixing bolt through both the directional lock bolt holes and the castors bolt holes when fitting to equipment: -
In StockSteel Pallet Feet 127mm x 127mm (KPF1A)
£4.07127mmx127mm Self-Colour Steel Pallet Feet (2.34 pl... Read Moreate thickness) and 56x56mm top to suit max. 50mm Square Post.
