- Sorry, this product cannot be purchased.
Accessories and Fittings
- Display 15 Products per page
-
In StockExpander Fitting, Square Tube, 24mm to 27mm (WR4724/27)
£3.22Square Expander Fitting to suit square tube with i... Read Morenternal diameter from 24mm to 27mm. 10mm bolt included. If fitting through a 12mm single bolt hole castor, please purchase ACZ500 to reduce the Bolt Hole to 10mm. -
In StockM10 x 30mm High Tensile Steel Bolt, Nut & Washer Set (BOLTSETM10X30)
£2.024 pack of M10 x 30mm High Tensile Steel Bolt, Nut ... Read More(nyloc), and Washer sets to fix your castors to your equipment. Nyloc Nuts contain a nylon insert that grips onto the bolt and prevents the nut from loosening due to the vibration that occurs when the castor wheel is moving. The pack contains:- (Qty 4) M10 x 30mm Threaded Bolts Grade 8.8 Hex Set finished in Bright Zinc Plate (BZP).
- (Qty 4) M10 Nylon Insert (Nyloc) Nuts (11.5mm Height) with BZP finish.
- (Qty 4) M10 Washers (20mm outside diameter, 10.5mm inside diameter, 2.2mm thick) with BZP finish.
-
In StockDirectional Lock for Revvo H Series Castors (9999-0181)
Original price was: £22.01.£20.64Current price is: £20.64. Sale!Retro-fit Directional Lock for the H Series Swivel... Read More Castor (4-Way Directional Lock). Converts any Revvo H Series 'swivel only' castor into fixed for straight line travel. Insert the fixing bolt through both the directional lock bolt holes and the castors bolt holes when fitting to equipment. Because of this, it in effect, shortens your bolt length by 4mm (the thickness of the D-lock). PLEASE NOTE: This product should not be used with castor with a foot because the brake makes contact with the Directional Lock and affects the swivel action. It can be used with a side mounted wheel lock.
-
In Stock
Expander Fitting, Square Tube, 36mm to 40mm (WR4736/40)
£7.21Square Expander Fitting to suit square tube with i... Read Morenternal diameter from 36mm to 40mm. 10mm bolt included. If fitting through a 12mm single bolt hole castor, please purchase ACZ500 to reduce the Bolt Hole to 10mm. -
In StockTeflon Wheel Tube: 15mm OD x 8mm ID x 49mm Length (TEFLONTUBE49158MM)
£2.43Teflon wheel tube to reduce a 15mm bore to 8mm bor... Read Moree. This tube has a 15mm Outside Diameter x 8mm Inside Diameter and 49mm Long to suit a wheel with a 15mm bore and 48mm hub length. -
In StockTeflon Wheel Tube: 12mm OD x 8.2mm ID x 42mm Length (TEFLONTUBE421282)
£3.27Teflon wheel tube to reduce a 12mm bore to 8.2mm b... Read Moreore. This tube has a 12mm Outside Diameter x 8.2mm Inside Diameter and 42mm Long to suit a wheel with a 12mm bore and 40mm hub length. This product has a stainless steel core with a Teflon coating. Suitable for high temperatures: -40 degrees to +280 Degrees Celsius -
In StockHeaded Spacer 20mm x 12mm x 1.5mm (sold in pairs) (2XKHSE)
£3.46A set of two machined steel top hat headed spacers... Read More to fit that fit into 20mm ball bearings to reduce the bearing bore to 12mm. The diameter of the top hat section is 25mm which has a 1.5mm thick shoulder that increases the wheel's hub length (the distance through the central bore) by 1.5mm each side of the wheel (3mm total increase to the hub length). The total length of the product is 18mm.
-
In StockExpander Fitting, Round Tube, 31mm to 35mm (WR0731/35)
£6.02Round Expander Fitting to suit round tube with int... Read Moreernal diameter from 31mm to 35mm. 10mm bolt included. If fitting through a 12mm single bolt hole castor, please purchase ACZ500 to reduce the Bolt Hole to 10mm. -
In StockSteel Wheel Tube: 20mm OD x 12mm ID x 59mm Len (TUBE205912)
£2.02Steel wheel tube to reduce a 20mm bore to 12mm. Th... Read Moreis steel tube is 59mm Long and has a 20mm Outside Diameter with an internal diameter of 12mm. -
In StockRetaining Washer 20mm (STARLOCKWASHER20)
£1.7220mm Domed (Capped) Wheel Retainer suitable for at... Read Moretaching wheels to a 20mm axle . -
In Stock
Retaining Washer 25.4mm (1 Inch) (1″STARLOCKWASHER)
£1.7225.4mm (1 Inch) Domed (capped) Wheel Retaining Was... Read Moreher suitable for attaching wheels to a 1 Inch axle . -
In StockExpander Fitting, Square Tube, 21.5mm to 24mm (WR4721.5/24)
£3.04Square Expander Fitting to suit square tube with i... Read Morenternal diameter from 21.5mm to 24mm. 10mm bolt included. If fitting through a 12mm single bolt hole castor, please purchase ACZ500 to reduce the Bolt Hole to 10mm. -
In StockSteel Wheel Tube: 12mm OD x 8mm ID x 41mm Length (TUBE2802900)
£1.17Steel wheel tube to reduce a 12mm bore to 8.5mm bo... Read Morere to suit an M8 Bolt. This steel tube has a 12mm Outside Diameter x 8.5mm Inside Diameter and 41mm Long to suit a wheel with a 12mm bore and 40mm hub length. -
In StockDirectional Lock for 2HK Series Castors (HKDL)
£27.77Retro-fit Directional Lock for the 2HK Series Swiv... Read Moreel Castor (4-Way Directional Lock). Converts the following 'swivel only' castor into fixed for straight line travel. Insert the fixing bolt through both the directional lock bolt holes and the castors bolt holes when fitting to equipment: -
In Stock
Expander Fitting, Square Tube, 32mm to 35mm (WR4732/35)
£6.86Square Expander Fitting to suit square tube with i... Read Morenternal diameter from 32mm to 35mm. 10mm bolt included. If fitting through a 12mm single bolt hole castor, please purchase ACZ500 to reduce the Bolt Hole to 10mm.
