- Sorry, this product cannot be purchased.
Accessories and Fittings
- Display 15 Products per page
-
In Stock6304-2RS Sealed Ball Bearing 20mm x 52mm x 15mm (6304RS)
£4.01Ball Bearings with an inside diameter of 20mm, an ... Read Moreoutside diameter of 52mm, and a width of 15mm. The rubber seals on the ball bearing protect the ball bearings from dirt ingress and also helps with lubricant retention. -
In StockExpander Fitting, Square Tube, 27mm to 30mm (WR4727/30)
£4.07Square Expander Fitting to suit square tube with i... Read Morenternal diameter from 27mm to 30mm. 10mm bolt included. If fitting through a 12mm single bolt hole castor, please purchase ACZ500 to reduce the Bolt Hole to 10mm. -
In Stock6204-2RS Sealed Ball Bearing 20mm x 47mm x 14mm (62042RS)
£2.17Ball Bearings with an inside diameter of 20mm, an ... Read Moreoutside diameter of 47mm, and a width of 14mm. The rubber seals on the ball bearing protect the ball bearings from dirt ingress and also helps with lubricant retention. -
In Stock
Expander Fitting, Square Tube, 32mm to 35mm (WR4732/35)
£6.86Square Expander Fitting to suit square tube with i... Read Morenternal diameter from 32mm to 35mm. 10mm bolt included. If fitting through a 12mm single bolt hole castor, please purchase ACZ500 to reduce the Bolt Hole to 10mm. -
In StockDirectional Lock for Revvo H Series Castors (9999-0181)
Original price was: £22.01.£20.64Current price is: £20.64. Sale!Retro-fit Directional Lock for the H Series Swivel... Read More Castor (4-Way Directional Lock). Converts any Revvo H Series 'swivel only' castor into fixed for straight line travel. Insert the fixing bolt through both the directional lock bolt holes and the castors bolt holes when fitting to equipment. Because of this, it in effect, shortens your bolt length by 4mm (the thickness of the D-lock). PLEASE NOTE: This product should not be used with castor with a foot because the brake makes contact with the Directional Lock and affects the swivel action. It can be used with a side mounted wheel lock.
-
In StockHeaded Spacer 15mm x 10mm x 2mm (sold in pairs) (2XKHSA)
£3.09A set of two machined steel top hat headed spacers... Read More to fit that fit into 15mm ball bearings to reduce the bearing bore to 10mm. The diameter of the top hat section is 20mm which has a 2mm thick shoulder that increases the wheel's hub length (the distance through the central bore) by 2mm each side of the wheel (4mm total increase to the hub length). The total length of the product is 15mm.
-
In StockM8 x 25mm High Tensile Steel Bolt, Nut & Washer Set (BOLTSETM8X25)
£1.904 pack of M8 x 25mm High Tensile Steel Bolt, Nut (... Read Morenyloc), and Washer sets to fix your castors to your equipment. Nyloc Nuts contain a nylon insert that grips onto the bolt and prevents the nut from loosening due to the vibration that occurs when the castor wheel is moving. The pack contains:- (Qty 4) M8 x 25mm Threaded Bolts Grade 8.8 Hex Set finished in Bright Zinc Plate (BZP).
- (Qty 4) M8 Nylon Insert (Nyloc) Nuts (9.5mm Height) with BZP finish.
- (Qty 4) M8 Washers (16mm outside diameter, 8.4mm inside diameter, 1.8mm thick) with BZP finish.
-
In StockRetaining Washer 25m (STARLOCKWASHER25)
£1.7225mm Domed (Capped) Wheel Retainer suitable for at... Read Moretaching wheels to a 25mm axle . -
Out of Stock - On the WayTeflon Wheel Tube: 20mm OD x 8mm ID x 49mm Length (TEFLONTUBE49208)
£3.11Teflon wheel tube to reduce a 20mm bore to 8mm bor... Read Moree. This tube has a 20mm Outside Diameter x 8mm Inside Diameter and 49mm Long to suit a wheel with a 20mm bore and 48mm hub length. -
In StockExpander Fitting, Round Tube, 27mm to 30mm (WR0727/30)
£3.68Round Expander Fitting to suit round tube with int... Read Moreernal diameter from 27mm to 30mm. 10mm bolt included. If fitting through a 12mm single bolt hole castor, please purchase ACZ500 to reduce the Bolt Hole to 10mm. -
In StockExpander Fitting, Square Tube, 21.5mm to 24mm (WR4721.5/24)
£3.04Square Expander Fitting to suit square tube with i... Read Morenternal diameter from 21.5mm to 24mm. 10mm bolt included. If fitting through a 12mm single bolt hole castor, please purchase ACZ500 to reduce the Bolt Hole to 10mm. -
In Stock
M6 x 25mm High Tensile Steel Bolt, Nut & Washer Set (BOLTSETM6X25)
£1.744 pack of M6 x 25mm High Tensile Steel Bolt, Nut (... Read Morenyloc), and Washer sets to fix your castors to your equipment. Nyloc Nuts contain a nylon insert that grips onto the bolt and prevents the nut from loosening due to the vibration that occurs when the castor wheel is moving. The pack contains:- (Qty 4) M6 x 25mm Threaded Bolts Grade 8.8 Hex Set finished in Bright Zinc Plate (BZP).
- (Qty 4) M6 Nylon Insert (Nyloc) Nuts (8mm Height) with BZP finish.
- (Qty 4) M6 Washers (12mm outside diameter, 6.4mm inside diameter, 1.8mm thick) with BZP finish.
-
In Stock6304-Z Sealed Ball Bearing 20mm x 52mm x 15mm (6304Z)
£4.01Ball Bearings with an inside diameter of 20mm, an ... Read Moreoutside diameter of 52mm, and a width of 15mm. The metal seals on the ball bearing protect the ball bearings from dirt ingress and also helps with lubricant retention. -
In Stock
Expander Fitting, Round Tube, 21.5mm to 24mm (WR0721.5/24)
£3.19Round Expander Fitting to suit round tube with int... Read Moreernal diameter from 21.5mm to 24mm. 10mm bolt included. If fitting through a 12mm single bolt hole castor, please purchase ACZ500 to reduce the Bolt Hole to 10mm. -
In Stock12mm | 10mm Bolt Hole reducer Fitting (ACZ500)
£0.54Required for 12mm Single Bolt hole castors to redu... Read Morece the bolt hole size to 10mm to suit the Tube Expander Fittings which come with 10mm bolts.
