- Sorry, this product cannot be purchased.
Accessories and Fittings
- Display 15 Products per page
-
In StockM6 x 25mm High Tensile Steel Bolt, Nut & Washer Set (BOLTSETM6X25)
£1.744 pack of M6 x 25mm High Tensile Steel Bolt, Nut (... Read Morenyloc), and Washer sets to fix your castors to your equipment. Nyloc Nuts contain a nylon insert that grips onto the bolt and prevents the nut from loosening due to the vibration that occurs when the castor wheel is moving. The pack contains:- (Qty 4) M6 x 25mm Threaded Bolts Grade 8.8 Hex Set finished in Bright Zinc Plate (BZP).
- (Qty 4) M6 Nylon Insert (Nyloc) Nuts (8mm Height) with BZP finish.
- (Qty 4) M6 Washers (12mm outside diameter, 6.4mm inside diameter, 1.8mm thick) with BZP finish.
-
In StockTeflon Wheel Tube: 15mm OD x 8mm ID x 49mm Length (TEFLONTUBE49158MM)
£2.43Teflon wheel tube to reduce a 15mm bore to 8mm bor... Read Moree. This tube has a 15mm Outside Diameter x 8mm Inside Diameter and 49mm Long to suit a wheel with a 15mm bore and 48mm hub length. -
In StockHeaded Spacer 20mm x 12mm x 1.5mm (sold in pairs) (2XKHSE)
£3.46A set of two machined steel top hat headed spacers... Read More to fit that fit into 20mm ball bearings to reduce the bearing bore to 12mm. The diameter of the top hat section is 25mm which has a 1.5mm thick shoulder that increases the wheel's hub length (the distance through the central bore) by 1.5mm each side of the wheel (3mm total increase to the hub length). The total length of the product is 18mm.
-
In StockExpander Fitting, Square Tube, 24mm to 27mm (WR4724/27)
£3.22Square Expander Fitting to suit square tube with i... Read Morenternal diameter from 24mm to 27mm. 10mm bolt included. If fitting through a 12mm single bolt hole castor, please purchase ACZ500 to reduce the Bolt Hole to 10mm. -
In StockExpander Fitting, Round Tube, 19mm to 21.5mm (WR0719/21.5)
£3.19Round Expander Fitting to suit round tube with int... Read Moreernal diameter from 19mm to 21.5mm. 10mm bolt included. If fitting through a 12mm single bolt hole castor, please purchase ACZ500 to reduce the Bolt Hole to 10mm. -
Out of Stock - On the WayTeflon Wheel Tube: 20mm OD x 8mm ID x 49mm Length (TEFLONTUBE49208)
£3.11Teflon wheel tube to reduce a 20mm bore to 8mm bor... Read Moree. This tube has a 20mm Outside Diameter x 8mm Inside Diameter and 49mm Long to suit a wheel with a 20mm bore and 48mm hub length. -
In Stock
M12 x 40mm High Tensile Steel Bolt, Nut & Washer Set (BOLTSETM12X40)
£2.894 pack of M12 x 40mm High Tensile Steel Bolt, Nut ... Read More(nyloc), and Washer sets to fix your castors to your equipment. Nyloc Nuts contain a nylon insert that grips onto the bolt and prevents the nut from loosening due to the vibration that occurs when the castor wheel is moving. The pack contains:- (Qty 4) M12 x 40mm Threaded Bolts Grade 8.8 Hex Set finished in Bright Zinc Plate (BZP).
- (Qty 4) M12 Nylon Insert (Nyloc) Nuts (14mm Height) with BZP finish.
- (Qty 4) M12 Washers (24mm outside diameter, 13mm inside diameter, 2.7mm thick) with BZP finish.
-
In Stock6304-2RS Sealed Ball Bearing 20mm x 52mm x 15mm (6304RS)
£4.01Ball Bearings with an inside diameter of 20mm, an ... Read Moreoutside diameter of 52mm, and a width of 15mm. The rubber seals on the ball bearing protect the ball bearings from dirt ingress and also helps with lubricant retention. -
In Stock12mm | 10mm Bolt Hole reducer Fitting (ACZ500)
£0.54Required for 12mm Single Bolt hole castors to redu... Read Morece the bolt hole size to 10mm to suit the Tube Expander Fittings which come with 10mm bolts. -
In StockSteel Wheel Tube: 12mm OD x 8mm ID x 46mm Length (2731-0042)
£1.32Steel wheel tube to reduce a 12mm bore to 8mm. Thi... Read Mores steel tube has a 12mm Outside Diameter x 8.2mm Inside Diameter and is 46mm Long to suits an M8 bolt. The tube is to suit a castor wheel with a 12mm bore and 45mm hub length. -
In StockDirectional Lock for 2HK Series Castors (HKDL)
£27.77Retro-fit Directional Lock for the 2HK Series Swiv... Read Moreel Castor (4-Way Directional Lock). Converts the following 'swivel only' castor into fixed for straight line travel. Insert the fixing bolt through both the directional lock bolt holes and the castors bolt holes when fitting to equipment: -
In StockTeflon Wheel Tube: 12mm OD x 8.2mm ID x 42mm Length (TEFLONTUBE421282)
£3.27Teflon wheel tube to reduce a 12mm bore to 8.2mm b... Read Moreore. This tube has a 12mm Outside Diameter x 8.2mm Inside Diameter and 42mm Long to suit a wheel with a 12mm bore and 40mm hub length. This product has a stainless steel core with a Teflon coating. Suitable for high temperatures: -40 degrees to +280 Degrees Celsius -
In StockHeaded Spacer 15mm x 10mm x 2mm (sold in pairs) (2XKHSA)
£3.09A set of two machined steel top hat headed spacers... Read More to fit that fit into 15mm ball bearings to reduce the bearing bore to 10mm. The diameter of the top hat section is 20mm which has a 2mm thick shoulder that increases the wheel's hub length (the distance through the central bore) by 2mm each side of the wheel (4mm total increase to the hub length). The total length of the product is 15mm.
-
In StockSteel Pallet Feet 127mm x 127mm (KPF1A)
£4.07127mmx127mm Self-Colour Steel Pallet Feet (2.34 pl... Read Moreate thickness) and 56x56mm top to suit max. 50mm Square Post. -
In Stock6204-2RS Sealed Ball Bearing 20mm x 47mm x 14mm (62042RS)
£2.17Ball Bearings with an inside diameter of 20mm, an ... Read Moreoutside diameter of 47mm, and a width of 14mm. The rubber seals on the ball bearing protect the ball bearings from dirt ingress and also helps with lubricant retention.
