- Sorry, this product cannot be purchased.
Accessories and Fittings
- Display 15 Products per page
-
In StockM6 x 25mm High Tensile Steel Bolt, Nut & Washer Set (BOLTSETM6X25)
£1.744 pack of M6 x 25mm High Tensile Steel Bolt, Nut (... Read Morenyloc), and Washer sets to fix your castors to your equipment. Nyloc Nuts contain a nylon insert that grips onto the bolt and prevents the nut from loosening due to the vibration that occurs when the castor wheel is moving. The pack contains:- (Qty 4) M6 x 25mm Threaded Bolts Grade 8.8 Hex Set finished in Bright Zinc Plate (BZP).
- (Qty 4) M6 Nylon Insert (Nyloc) Nuts (8mm Height) with BZP finish.
- (Qty 4) M6 Washers (12mm outside diameter, 6.4mm inside diameter, 1.8mm thick) with BZP finish.
-
In Stock12mm | 10mm Bolt Hole reducer Fitting (ACZ500)
£0.54Required for 12mm Single Bolt hole castors to redu... Read Morece the bolt hole size to 10mm to suit the Tube Expander Fittings which come with 10mm bolts. -
In StockCastor Fixing Plate 105mm x 80mm Bolt Hole Centres (PLATE135x110)
£4.33Our un-plated castor fixing plate is made for y... Read Moreou to weld / attach to your equipment to give you a suitable base to attach your castor.
The plate measures 135x110mm and is 3mm thick. It comes with 4 horizontally slotted bolt fixing holes with 105mm x 80mm bolt hole centres. Each hole measures 11mm x 15mm and suits 10mm bolts.
You can purchase the fixing bolts here
-
In StockExpander Fitting, Square Tube, 32mm to 35mm (WR4732/35)
£6.86Square Expander Fitting to suit square tube with i... Read Morenternal diameter from 32mm to 35mm. 10mm bolt included. If fitting through a 12mm single bolt hole castor, please purchase ACZ500 to reduce the Bolt Hole to 10mm. -
In StockTeflon Wheel Tube: 12mm OD x 8.2mm ID x 42mm Length (TEFLONTUBE421282)
£3.27Teflon wheel tube to reduce a 12mm bore to 8.2mm b... Read Moreore. This tube has a 12mm Outside Diameter x 8.2mm Inside Diameter and 42mm Long to suit a wheel with a 12mm bore and 40mm hub length. This product has a stainless steel core with a Teflon coating. Suitable for high temperatures: -40 degrees to +280 Degrees Celsius -
In StockCastor Fixing Plate 80mm x 60mm Bolt Hole Centres (PLATE100x85)
£3.34Our un-plated castor fixing plate is made for you ... Read Moreto weld / attach to your equipment to give you a suitable base to attach your castor. The plate measures 100x85mm and is 3mm thick. It comes with 4 diagonally slotted bolt fixing holes with 80mm x 60mm, or, 75mm x 45mm bolt hole centres. Each hole measures 9mm x 16mm and suits 8mm bolts. You can purchase the fixing bolts here -
In StockRetaining Washer 7/16″ (STARLOCKWASHER7/16)
£0.397/16 Inch Domed (Capped) Wheel Retainer suitable f... Read Moreor attaching wheels to a 7/16 Inch axle . -
In StockExpander Fitting, Round Tube, 31mm to 35mm (WR0731/35)
£6.02Round Expander Fitting to suit round tube with int... Read Moreernal diameter from 31mm to 35mm. 10mm bolt included. If fitting through a 12mm single bolt hole castor, please purchase ACZ500 to reduce the Bolt Hole to 10mm. -
In Stock
Expander Fitting, Square Tube, 27mm to 30mm (WR4727/30)
£4.07Square Expander Fitting to suit square tube with i... Read Morenternal diameter from 27mm to 30mm. 10mm bolt included. If fitting through a 12mm single bolt hole castor, please purchase ACZ500 to reduce the Bolt Hole to 10mm. -
In StockHeaded Spacer 20mm x 12mm x 1.5mm (sold in pairs) (2XKHSE)
£3.46A set of two machined steel top hat headed spacers... Read More to fit that fit into 20mm ball bearings to reduce the bearing bore to 12mm. The diameter of the top hat section is 25mm which has a 1.5mm thick shoulder that increases the wheel's hub length (the distance through the central bore) by 1.5mm each side of the wheel (3mm total increase to the hub length). The total length of the product is 18mm.
-
In Stock6204-2RS Sealed Ball Bearing 20mm x 47mm x 14mm (62042RS)
£2.17Ball Bearings with an inside diameter of 20mm, an ... Read Moreoutside diameter of 47mm, and a width of 14mm. The rubber seals on the ball bearing protect the ball bearings from dirt ingress and also helps with lubricant retention. -
In StockSteel Pallet Feet 152mm x152mm (KPF2)
£10.66152x152mm Self-Colour Steel Pallet Feet (5mm plat... Read Moree thickness) and 80x80mm top to suit max 80mm Square Post. -
In Stock
Expander Fitting, Square Tube, 36mm to 40mm (WR4736/40)
£7.21Square Expander Fitting to suit square tube with i... Read Morenternal diameter from 36mm to 40mm. 10mm bolt included. If fitting through a 12mm single bolt hole castor, please purchase ACZ500 to reduce the Bolt Hole to 10mm. -
In StockSteel Wheel Tube: 12mm OD x 8mm ID x 41mm Length (TUBE2802900)
£1.17Steel wheel tube to reduce a 12mm bore to 8.5mm bo... Read Morere to suit an M8 Bolt. This steel tube has a 12mm Outside Diameter x 8.5mm Inside Diameter and 41mm Long to suit a wheel with a 12mm bore and 40mm hub length. -
In StockSteel Wheel Tube: 15mm OD x 10.8mm ID x 49mm Length (TUBE2662110)
£1.37Steel wheel tube to reduce a 15mm bore to 10.8mm b... Read Moreore to suit an M10 Bolt. This steel tube has a 15mm Outside Diameter x 10.8mm Inside Diameter and 49mm Long to suit a wheel with a 15mm bore and 48mm hub length.
