Polyurethane Tyre / Cast Iron Wheels - Revvo PT Designer Series
Revvo Polyurethane Tyre / Cast Iron Designer Series Wheels offer the design engineer an unrivalled choice. This range of High Performance cast iron wheels with premium quality REVVOTHANE polyurethane tyres offer specific boundary dimensions into which can be incorporated bearings, bores or keyways as required.REVVOTHANE is... a premium quality polyurethane elastomer for wheels in conveyors and transportation systems. It provides high load bearing capacity, minimal build up of heat and high abrasion resistance.
Notes about PT Series Designer Wheel Load Ratings
The Revvo Polyurethane Tyre / Cast Iron Designer Series Wheels are used in a very wide range of applications which may affect the wheels load capacity. The stated wheel loadings are for operation under ideal conditions. That is, the wheel operates infrequently on a smooth surface without axial loading.
The wheel loading must be reduced as follows for any of the following conditions:
Frequent Use:
If the wheel is to be in use for more than 45 minutes continuous operation, reduce loadings by 25%
Driving Applications
If the wheel is to be used as a drive wheel, reduce loads by 30%
Speeds of 6 - 10 km/h
If operating speeds are between 6km/h and 10 km/h, reduce loadings by 20%
Speeds of 10 - 16km/h
If operating speeds are between 10km/h and 16km/h, reduce loadings by 20%
REDUCTIONS ARE CUMULATIVE IF MORE THAN ON CONDITION EXISTS
Read More- Display 15 Products per page
Out of Stock - On the WayDesigner Polyurethane Tyre Wheel 200mm | Polyurethane Tyre / Cast Iron, 1000kg, 25mm Plain Bore Keywayed (20040PTU25)
£119.12200mm Polyurethane (Extra Heavy Duty) Tyre on a... Read More Cast Iron Centre Wheel with 40mm Tread Width, 25mm Keyway Plain Bore and 50mm Hub Length.
This is a high performance wheel using premium grade REVVOTHANE polyurethane which is a high quality tyre with a high load bearing capacity, minimal heat build up and a high abrasion resistance. This wheel is often used in conveyor and transportation systems.
The Load capacity quoted is for operation under ideal conditions where the wheel operates infrequently and on a smooth surface. The wheel's load capacity must be reduced as indicated for any of the following conditions. Please note that these are cumulative if more than one condition exists:
- Reduce load by 25% if continuous use for more than 45 minutes.
- Reduce Load by further 30% if used as Drive Wheel.
- Reduce load by further 30% if used at speeds greater than 6kp/h.
- In Stock
Designer Polyurethane Tyre Wheel 200mm | Polyurethane Tyre / Cast Iron, 1000kg, 30mm Plain Bore Keywayed (20040PTU30)
Original price was: £120.24.£119.56Current price is: £119.56.Sale!200mm Polyurethane (Extra Heavy Duty) Tyred / Cast... Read More Iron Centre Wheel with 30mm Keyway Plain Bore. This is a high performance wheel using premium grade REVVOTHANE polyurethane which is a high quality tyre with a high load bearing capacity, minimal heat build up and a high abrasion resistance. This wheel is often used in conveyor and transportation systems.The Load capacity quoted is for operation under ideal conditions where the wheel operates infrequently and on a smooth surface. The wheel's load capacity must be reduced as indicated for any of the following conditions. Please note that these are cumulative if more than one condition exists:- Reduce load by 25% if continuous use for more than 45 minutes.
- Reduce Load by further 30% if used as Drive Wheel.
- Reduce load by further 30% if used at speeds greater than 6kp/h.
- Out of Stock - On the Way
Designer Polyurethane Tyre Wheel 200mm | Polyurethane Tyre / Cast Iron, 1300kg, 30mm Ball Bearing (20060PT230)
£188.71200mm Polyurethane (Extra Heavy Duty) Tyred / C... Read Moreast Iron Centre Wheel with 30mm Ball Bearing. This is a high performance wheel using premium grade REVVOTHANE polyurethane which is a high quality tyre with a high load bearing capacity, minimal heat build up and a high abrasion resistance. This wheel is often used in conveyor and transportation systems.
The Load capacity quoted is for operation under ideal conditions where the wheel operates infrequently and on a smooth surface. The wheel's load capacity must be reduced as indicated for any of the following conditions. Please note that these are cumulative if more than one condition exists:
- Reduce load by 25% if continuous use for more than 45 minutes.
- Reduce Load by further 30% if used as Drive Wheel.
- Reduce load by further 30% if used at speeds greater than 6kp/h.
- In Stock
Designer Polyurethane Tyre Wheel 200mm | Polyurethane Tyre / Cast Iron, 1300kg, 30mm Plain Bore (20060PT030)
£163.16200mm Polyurethane (Extra Heavy Duty) Tyred / C... Read Moreast Iron Centre Wheel with 30mm Plain Bore. This is a high performance wheel using premium grade REVVOTHANE polyurethane which is a high quality tyre with a high load bearing capacity, minimal heat build up and a high abrasion resistance. This wheel is often used in conveyor and transportation systems.
The Load capacity quoted is for operation under ideal conditions where the wheel operates infrequently and on a smooth surface. The wheel's load capacity must be reduced as indicated for any of the following conditions. Please note that these are cumulative if more than one condition exists:
- Reduce load by 25% if continuous use for more than 45 minutes.
- Reduce Load by further 30% if used as Drive Wheel.
- Reduce load by further 30% if used at speeds greater than 6kp/h.
- In Stock
Designer Polyurethane Tyre Wheel 200mm | Polyurethane Tyre / Cast Iron, 1300kg, 35mm Plain Bore Keywayed (20060PTU35)
£170.35200mm Polyurethane (Extra Heavy Duty) Tyred / C... Read Moreast Iron Centre Wheel with 35mm Keywayed Plain Bore. This is a high performance wheel using premium grade REVVOTHANE polyurethane which is a high quality tyre with a high load bearing capacity, minimal heat build up and a high abrasion resistance. This wheel is often used in conveyor and transportation systems.
The Load capacity quoted is for operation under ideal conditions where the wheel operates infrequently and on a smooth surface. The wheel's load capacity must be reduced as indicated for any of the following conditions. Please note that these are cumulative if more than one condition exists:
- Reduce load by 25% if continuous use for more than 45 minutes.
- Reduce Load by further 30% if used as Drive Wheel.
- Reduce load by further 30% if used at speeds greater than 6kp/h.
- In Stock
Designer Polyurethane Tyre Wheel 250mm | Polyurethane Tyre / Cast Iron, 1200kg, 30mm Plain Bore Keywayed (25045PTU30)
£179.67250mm Polyurethane (Extra Heavy Duty) Tyre / Cast ... Read MoreIron Centre Wheel with 30mm Keyway Plain Bore. This is a high performance wheel using premium grade REVVOTHANE polyurethane which is a high quality tyre with a high load bearing capacity, minimal heat build up and a high abrasion resistance. This wheel is often used in conveyor and transportation systems.The Load capacity quoted is for operation under ideal conditions where this industrial wheel operates infrequently and on a smooth surface. The wheel's load capacity must be reduced as indicated for any of the following conditions. Please note that these are cumulative if more than one condition exists:- Reduce load by 25% if continuous use for more than 45 minutes.
- Reduce Load by further 30% if used as Drive Wheel.
- Reduce load by further 30% if used at speeds greater than 6kp/h.
- In Stock
Designer Polyurethane Tyre Wheel 250mm | Polyurethane Tyre / Cast Iron, 2000kg, 30mm Plain Bore (25070PT030)
£235.83250mm Polyurethane (Extra Heavy Duty) Tyred / Cast... Read More Iron Centre Wheel with 30mm Plain Bore. This is a high performance wheel using premium grade REVVOTHANE polyurethane which is a high quality tyre with a high load bearing capacity, minimal heat build up and a high abrasion resistance. This wheel is often used in conveyor and transportation systems.The Load capacity quoted is for operation under ideal conditions where the wheel operates infrequently and on a smooth surface. The wheel's load capacity must be reduced as indicated for any of the following conditions. Please note that these are cumulative if more than one condition exists:- Reduce load by 25% if continuous use for more than 45 minutes.
- Reduce Load by further 30% if used as Drive Wheel.
- Reduce load by further 30% if used at speeds greater than 6kp/h.
- Out of Stock - On the Way
Designer Polyurethane Tyre Wheel 300mm | Polyurethane Tyre / Cast Iron, 2800kg, 30mm Plain Bore (30075PT030)
£369.85300mm Polyurethane (Premium Grade REVVOTHANE) T... Read Moreyred / Cast Iron Centre Wheel with 30mm Plain Bore. This is a high performance wheel using premium grade REVVOTHANE polyurethane which is a high quality tyre with a high load bearing capacity, minimal heat build up and a high abrasion resistance. This wheel is often used in conveyor and transportation systems.
The Load capacity quoted is for operation under ideal conditions where the wheel operates infrequently and on a smooth surface. The wheel's load capacity must be reduced as indicated for any of the following conditions. Please note that these are cumulative if more than one condition exists:
- Reduce load by 25% if continuous use for more than 45 minutes.
- Reduce Load by further 30% if used as Drive Wheel.
- Reduce load by further 30% if used at speeds greater than 6kp/h.
- In Stock
Designer Polyurethane Tyre Wheel 300mm | Polyurethane Tyre / Cast Iron, 2800kg, 50mm Plain Bore Keywayed (30075PTU50)
£388.36300mm Polyurethane (Premium Grade REVVOTHANE) T... Read Moreyred / Cast Iron Centre Wheel with 50mm Keywayed Plain Bore. This is a high performance wheel using premium grade REVVOTHANE polyurethane which is a high quality tyre with a high load bearing capacity, minimal heat build up and a high abrasion resistance. This wheel is often used in conveyor and transportation systems.
The Load capacity quoted is for operation under ideal conditions where the wheel operates infrequently and on a smooth surface. The wheel's load capacity must be reduced as indicated for any of the following conditions. Please note that these are cumulative if more than one condition exists:
- Reduce load by 25% if continuous use for more than 45 minutes.
- Reduce Load by further 30% if used as Drive Wheel.
- Reduce load by further 30% if used at speeds greater than 6kp/h.
