Swivel Castors
Swivel Castors and wheels can swivel 360 degrees about the vertical axis (see figure below). They consist of a housing and a caster wheel. The housing itself is made up of a plate fitting, swivel bearings and a yoke. The Yoke is often referred to as the castor's frame (see figure below).The plate fitting determines how the... castor is going to be attached to the equipment. It is usually either a single bolt hole fitting or a plate fixing which is generally square, rectangular or triangular. Plate fittings are usually bolted to equipment so knowing your required bolt hole centres is important. The Swivel Head consists of a ball race and a number of ball bearings that roll within it. Swivel Castors can either have a single ball race or a double ball race. They perform the same function. The double ball race was developed for medium and heavy applications. This is because they are compact, perform well under static and dynamic loads and provide excellent steerability.
Swivel castors can be fitting with locks which lock (brake) wither the wheel or the swivel head or both. See Brake Castors.
Swivel Castor Components
Swivel Castor Offset
The Swivel Castor's offset it the distance from the swivel axis to the centre of the wheel (where it is secured to the castor frame). It is the reason a swivel castor will go in the direction you want it to go regardless its starting direction. The offset and castor wheel's diameter make up the swivel radius where the swivel radius = Offset + (Wheel Diameter / 2).
This is the radius of circle described but the outer dimension of the wheel swivelling around the vertical axis. Basically, this is important because it tells you how much room is needed for the swivel caster to swivel. Furthermore, the general rule is the bigger the offset the better the castor's running performance but the lower the weight it can carry. Read More
- Display 15 Products per page
- In Stock
50mm Low Level Swivel Castor, 160kg Capacity | Nylon Wheel, Plain Bore (MSTW050NY)
£10.5050mm Twin Wheel Swivel Castor with Round Top Plate... Read More (Keystone) with a 64mm overall height and 160kg load rating. The Nylon Wheels have a tread width of 14mm each and with a smooth Plain Bore.The round top plate has a diameter of 95mm and 4 fixing holes to suit 6mm bolts. Each fixing hole is spaced 51mm from the fixing hole diagonally opposite (the largest distance between the fixing holes)This castor offers an exceptional load capacity in relation to its low overall working height and is ideal for heavy equipment being used on smooth, hard flooring. The differential action from the twin wheels makes for smooth operation. - In Stock
100mm Swivel Castor, 150kg Capacity | Nylon Wheel, Ball Bearing (1321728)
£9.46100mm Top Plate Swivel Castor (Pressed Steel) w... Read Moreith 80x60 Hole Centres. Nylon Wheel with Ball Bearing. Load Capacity = 150kg
This is a 4 hole plate fitting castor and the bolt holes suit an 8mm bolt as well as being slotted (rather than round) to accommodate 80/76mm x 60x44.5mm.
- In Stock
100mm Swivel Castor, 150kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (1321726)
£13.76100mm Top Plate Swivel Castor (Pressed Steel) with... Read More 80x60 Hole Centres. Polyurethane Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 150kg.This is a 4 hole plate fitting castor and the bolt holes suit an 8mm bolt as well as being slotted (rather than round) to accommodate 80/76mm x 60x44.5mm. - In Stock
160mm Swivel Castor, 300kg Capacity | Rubber Tyre Wheel, Ball Bearing (KSMG160EAB)
£49.17160mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith 105x80 Hole Centres. Black Rubber Tyre / Aluminium Centre Wheel with Ball Bearing. Load Capacity = 300kg - In Stock
100mm Swivel Castor, 80kg Capacity | Polypropylene Wheel, Plain Bore (LSV100PPBH)
£7.02100mm White Polypropylene wheel with a smooth p... Read Morelain bore fitted into a 12mm Single Bolt Hole Swivel Castor (Pressed Steel castor frame). This castor has a 80kg load capacity using manual propulsion at 4 km/h.
This castor is fitted with a White Polypropylene wheel that will not mark the floor and is ideal for most general castor purposes such as trolley castors or dolly castors. Single Bolt Hole castors can have a expander tube fitting (purchased separately) attached to insert into hollow square or round tubing. See our section on Expander Tube Fittings
- In Stock
100mm Swivel Castor, 160kg Capacity | Rubber Tyre Wheel, Roller Bearing (MSK100RN1B)
£15.79100mm Top Plate Swivel Castor (Heavy Gauge Pressed... Read More Steel) with 80x60 Hole Centres. Rubber Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 160kg - Out of Stock - On the Way
100mm Swivel Castor, 340kg Capacity | Cast Iron Wheel, Roller Bearing (461CIB)
£23.64100mm Top Plate Swivel Castor (Flexello 61 Seri... Read Morees) with 105x80mm Hole Centres. Cast Iron Wheel with Roller Bearing. Load Capacity = 340kg
The Flexello 61 Series is an established industry standard range of Pressed Steel Castors that is suitable for most industrial castor uses. This range has a ball bearing swivel head and finished with a bright zinc plating. This range has a larger top plate than most 100mm castors with the castor's top plate measuring 128x102mm.
- In Stock
50mm Swivel Castor, 50kg Capacity | Polypropylene Wheel, Plain Bore (LSM050PP)
£3.0850mm Swivel Castor with a 4 hole top plate and 48/... Read More38x48/38mm bolt hole centres to suit 6mm fixing bolts. The wheel is Black Polypropylene with Plain Bore. Load Capacity = 50kg - In Stock
200mm Swivel Castor, 1100kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (TSH200PT15)
£152.48200mm Heavy Duty Top Plate Swivel Castor (Fabri... Read Morecated Castor) with 105x80mm Bolt Hole Centres. Polyurethane Tyre / Cast Iron Centre Wheel with Roller Bearing. Load Capacity = 1100kg
Features of the H Series Castor
- The Genuine Revvo H Series castor is made from heavy gauge forged steel with a hardened ball race in the swivel race that serve as both thrust and radial bearings.
- The swivel head comes with a metal swivel seal and hydraulic grease nipple
- The closed base of the swivel ring prevents downward escape of lubricant
- The side plates are press formed to a cylindrical shape to give the best strength to weight ratio
- A four way direction lock can be purchased and fitted to the castor 9999-0181
- In Stock
125mm Swivel Castor, 180kg Capacity | Rubber Tyre Wheel, Plain Bore (561RN)
£32.23125mm Top Plate Swivel Castor (Pressed Steel) with... Read More 140x105 Hole Centres. Rubber Tyre / Nylon Centre Wheel with Plain Bore. Load Capacity = 180kg - In Stock
75mm Heavy Duty Swivel Castor, 300kg Capacity | White Nylon Wheel, Ball Bearing (HSV075NY2B)
£23.4775mm Heavy Duty Top Plate Swivel Castor with Heavy... Read More Gauge Pressed Steel and a load capacity of 300kg. The swivel head has a double ball race with hardened ball race track.- The Top Plate measure 105x80mm with 80x60mm Fixing Bolt Hole Centres. The bolt holes are slotted to 80/75x60/55mm and suits 8mm Bolts.
- The castor wheel is a white nylon wheel (polyamide) with a 32mm tread width and fitted with two precision ball bearings. The hard wheel is non-marking and has the lowest rolling and swivel resistance.
- This castor is an excellent all purpose heavy duty castor. It is often used with high load mobile storage and transportation equipment in domestic, mechanical and industrial applications.
- In Stock
80mm Swivel Castor, 130kg Capacity | Rubber Tyre Wheel, Roller Bearing (MSV080RN1B)
£8.4980mm Blue Elastic Rubber Tyre wheel on a nylon ... Read Morecentre with a roller bearing fitted into a pressed steel swivel castor bracket. The Swivel Bracket has a 4 hole top plate with 80x60mm bolt hole spacing. The load capacity of this castor is 130kg using manual propulsion at 4km/h (walking speed)
The Blue Elastic Rubber Tyre offers a higher load capacity than standard grey or black rubber tyres and is non-marking, gentle on floors. The rubber absorbs vibrations whilst in motion making this a low noise option. The roller bearing lowers the rolling resistance to reduce the effort required to move the castors. Put this wheel into a strong bracket that has a double ball race in the swivel head makes this castors a truly great performer.
- In Stock
200mm Swivel Castor, 800kg Capacity | Polyurethane Tyre Wheel, Ball bearing (KS200APCB800)
£85.08200mm Top Plate Swivel Castor (Heavy Gauge Pressed... Read More Steel Bracket) with 105x80mm Bolt Hole Centres. Polyurethane Tyre / Cast Iron Centre Wheel with Ball Bearing. Load Capacity = 800kg