![Swivel Castors](https://www.keystonecastors.co.uk/wp-content/uploads/2023/06/150mm-Swivel-Castor-with-Red-Polyurethane-Tyre-White-Nylon-Centre-Wheel-622PNB-scaled.jpg)
Swivel Castors
Swivel Castors and wheels can swivel 360 degrees about the vertical axis (see figure below). They consist of a housing and a caster wheel. The housing itself is made up of a plate fitting, swivel bearings and a yoke. The Yoke is often referred to as the castor's frame (see figure below).The plate fitting determines how the... castor is going to be attached to the equipment. It is usually either a single bolt hole fitting or a plate fixing which is generally square, rectangular or triangular. Plate fittings are usually bolted to equipment so knowing your required bolt hole centres is important. The Swivel Head consists of a ball race and a number of ball bearings that roll within it. Swivel Castors can either have a single ball race or a double ball race. They perform the same function. The double ball race was developed for medium and heavy applications. This is because they are compact, perform well under static and dynamic loads and provide excellent steerability.
Swivel castors can be fitting with locks which lock (brake) wither the wheel or the swivel head or both. See Brake Castors.
Swivel Castor Components
![Swivel Castor Components Diagram](https://www.keystonecastors.co.uk/wp-content/uploads/2023/09/Swivel-Castor-Components-Drawing-293x300.jpg)
Swivel Castor Offset
The Swivel Castor's offset it the distance from the swivel axis to the centre of the wheel (where it is secured to the castor frame). It is the reason a swivel castor will go in the direction you want it to go regardless its starting direction. The offset and castor wheel's diameter make up the swivel radius where the swivel radius = Offset + (Wheel Diameter / 2).
This is the radius of circle described but the outer dimension of the wheel swivelling around the vertical axis. Basically, this is important because it tells you how much room is needed for the swivel caster to swivel. Furthermore, the general rule is the bigger the offset the better the castor's running performance but the lower the weight it can carry. Read More
- Sort by Popularity (sales)
- Display 15 Products per page
- In Stock
100mm Swivel Castor, 150kg Capacity | Rubber Tyre Wheel, Ball Bearing (1321828)
£13.81100mm Bolt Hole Swivel Castor (Pressed Steel) with... Read More 10mm Bolt Hole. Blue Rubber Tyre / Nylon Centre Wheel with Ball Bearing. Load Capacity = 150kg - In Stock
100mm Swivel Castor, 150kg Capacity | Nylon Wheel, Plain Bore (1321780)
£7.29100mm Bolt Hole Swivel Castor (Pressed Steel) with... Read More 10mm Bolt Hole. Nylon Wheel with Plain Bore. Load Capacity = 150kg - In Stock
50mm Footmaster Levelling Castor, 250kg Capacity | Nylon Wheel (KGDR-60F)
£45.9450mm Foot Master Levelling Castor with an ivory... Read More coloured powder coating finish. This product has a 4-hole top plate with 58mm x 58mm bolt hole centres and is also powder coated for added protection. The wheel is made from premium quality black Nylon with a 25mm Tread width and the Die Cast Aluminium Foot Pad has a rubber pad vibration damping rubber pad. This foot pad has a Retractable Ratchet operation.
This product's load capacity has been increased to 280kg Static Load and 140kg Dynamic Load.
Because of the lifting and lowering function of the Foot Master castor, like all Jacking Castors, it is important understand that each castor may be subjected to HALF THE TOTAL WEIGHT. Therefore, the recommended load capacity for each Foot Master Levelling Castor is half the castor's Static Load Capacity, that is, when the castors' levelling function is not being used. The load capacity of the Footmaster Castor when it is being moved and positioned is given by the Dynamic Load Capacity.
This levelling castor is a multi-functional swivel castor that provides mobility, levelling and anti-vibration functions. This allows users to move and position large equipment into place with added stability using the levelling and anti-vibration features.
- In Stock
60mm Swivel Castor, 120kg Capacity | Nylon Wheel, Plain Bore (MSVH060NY0B)
£8.6760mm Single Bolt Hole Swivel Castor to suit 12m... Read Morem bolt. The castor bracket is made from pressed steel and houses a solid nylon Wheel with a plain bore (without a bearing).
This castor's load capacity is rated to 120kg using manual propulsion at 4km/h making it a great castor choice for most applications that require a small castor.
This single bolt hole castor can be fitted with an expander fitting and requires a ACZ500 bolt hole reducer to reduce the 12mm bolt hole to a 10mm bolt hole to fit the expander fitting's bolt that is 10mm.
- In Stock
75mm Swivel Castor, 75kg Capacity | Rubber Tyre Wheel, Ball Bearing (KAHS075TPR)
£5.42This apparatu... Read Mores / institutional castor comes with a 75mm Grey Thermoplastic Rubber Tyre Wheel on a nylon centre fitted into a 10mm Single Bolt Hole Swivel Castor (Pressed Steel Frame) with a double ball race swivel head. The load capacity of this castor is 75kg using manual propulsion at 4km/h
This castor is fitted with a grey rubber tyre that will not mark or damage the floor and is ideal for most general, light duty castor purposes such as trolley castors or dolly castors. The Ball Bearing in the wheel provides excellent rolling performance.
Single Bolt Hole castors can have a expander tube fitting (purchased separately) attached to insert into hollow square or round tubing. See our section on Expander Tube Fittings
- In Stock
50mm Compact Swivel Brake Castor, 150kg Capacity | Polyurethane Tyre Wheel, Ball bearing (KS050PT2BBHBR)
£16.3650mm Low Level swivel with brake castor and 12mm S... Read Moreingle Bolt Hole Fixing. This Low Level compact castor has an overall height of 70mm and an Orange Polyurethane Wheel on a steel centre with a 33mm Tread Width and Ball bearings. Load Capacity = 150kg - In Stock
125mm Swivel Castor, 200kg Capacity | Nylon Wheel, Ball Bearing (MSV125NY2B)
£10.60125mm White Nylon Wheel with a ball bearing fit... Read Moreted into a pressed steel swivel castor bracket. The Swivel Bracket has a 4 hole top plate with 80x60mm bolt hole spacing. The load capacity of this castor is 200kg using manual propulsion at 4km/h (walking speed)
The Nylon Wheel is a hard wheel giving it a low tractive resistance which makes it it easier to get moving compared with softer rubber tread wheels. The strength of nylon and because it wont damage concrete floors makes it one of the most popular choices. The ball bearing lowers the rolling resistance to reduce the effort required to move the castors. Put this wheel into a strong bracket that has a double ball race in the swivel head makes this castor a great choice for the widest range of industrial and domestic applications.</p>
- In Stock
100mm Swivel Castor, 75kg Capacity | Rubber Tyre Wheel, Roller Bearing (MSV100GRP1B)
£6.43100mm Grey Rubber Tyre wheel on a plastic centr... Read Moree with a roller bearing fitted into a pressed steel swivel castor bracket. The Swivel Bracket has a 4 hole top plate with 80x60mm bolt hole spacing. The load capacity of this castor is 75kg using manual propulsion at 4km/h (walking speed)
The Grey Rubber Tyre is a softer wheel compared to hard tread wheels like nylon and the rubber absorbs vibrations whilst in motion making this a low noise option and will not mark or scratch the floor. The roller bearing lowers the rolling resistance to reduce the effort required to move the castors. Together with the strong bracket that has a double ball race in the swivel head makes this castor a great choice for many industrial or domestic applications.
- In Stock
125mm Stainless Steel Swivel Castor, 150kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (MSS125PNB)
£29.53125mm Top Plate Swivel Castor (Stainless Steel Cas... Read Moretor) with 80x60 Hole Centres. Polyurethane Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 150kg - Out of Stock - On the Way
- In Stock
50mm Low Level Swivel Castor, 270kg Capacity | Steel Wheel, Plain Bore (2SL050ST0L)
£27.7850mm Low Level Twin Wheel Swivel Castor (Revvo Bra... Read Morend). The steel wheels each have a tread width of 14mm and turn on a smooth Plain Bore. The Load Capacity of 270kg.This castors offers an exceptional load capacity in relation to their low overall working height and is ideal for heavy equipment being used on smooth, hard flooring. The differential action from the twin wheels makes for smooth operation.This castor has a round top plate with a diameter of 95mm and 4 fixing holes to suit a 6mm bolt. Each fixing hole is spaced 51mm from the directly opposite fixing hole (the largest distance between the fixing holes) - In Stock
40mm Swivel Castor, 16kg Capacity | Rubber Tyre Wheel, Plain Bore (KS040RP)
£2.1540mm Grey Rub... Read Moreber Tyre Wheel on a nylon centre fitted into a Top Plate Swivel Castor with 36x36mm bolt hole centres. The load capacity of this castor is 16kg using manual propulsion at 4km/h
This popular general, light duty purpose castor is fitted with a grey rubber tyre that will not mark or damage the floor and is ideal for most domestic and industrial castor uses where a small yet sturdy castor in needed.
- Out of Stock - On the Way
100mm Swivel Castor, 340kg Capacity | Cast Iron Wheel, Plain Bore (461CI)
£22.77100mm Top Plate Swivel Castor (Flexello 61 Seri... Read Morees) with 105x80 Hole Centres. Cast Iron Wheel with Plain Bore. Load Capacity = 340kg
The Flexello 61 Series is an established industry standard range of Pressed Steel Castors that is suitable for most industrial castor uses. This range has a ball bearing swivel head and finished with a bright zinc plating. This range has a larger top plate than most 100mm castors with the castor's top plate measuring 128x102mm.
- In Stock
50mm Compact Swivel Castor, 200kg Capacity | 50mm Nylon Wheel, Ball bearing (KS050NYBJ200)
£12.3350mm Low Level swivel castor (Black Painted Frame)... Read More with 71x55mm Top Plate and 53x36mm Fixing Bolt Hole Centres.This High Load Low Level compact castor has an overall height of 71mm and a Black Nylon Wheel with a 24mm Tread Width and Ball bearings. Load Capacity = 200kg - In Stock
75mm Heavy Duty Swivel Castor, 300kg Capacity | White Nylon Wheel, Ball Bearing (HSV075NY2B)
£23.4775mm Heavy Duty Top Plate Swivel Castor with Heavy... Read More Gauge Pressed Steel and a load capacity of 300kg. The swivel head has a double ball race with hardened ball race track.- The Top Plate measure 105x80mm with 80x60mm Fixing Bolt Hole Centres. The bolt holes are slotted to 80/75x60/55mm and suits 8mm Bolts.
- The castor wheel is a white nylon wheel (polyamide) with a 32mm tread width and fitted with two precision ball bearings. The hard wheel is non-marking and has the lowest rolling and swivel resistance.
- This castor is an excellent all purpose heavy duty castor. It is often used with high load mobile storage and transportation equipment in domestic, mechanical and industrial applications.