Swivel Castors
Swivel Castors and wheels can swivel 360 degrees about the vertical axis (see figure below). They consist of a housing and a caster wheel. The housing itself is made up of a plate fitting, swivel bearings and a yoke. The Yoke is often referred to as the castor's frame (see figure below).The plate fitting determines how the... castor is going to be attached to the equipment. It is usually either a single bolt hole fitting or a plate fixing which is generally square, rectangular or triangular. Plate fittings are usually bolted to equipment so knowing your required bolt hole centres is important. The Swivel Head consists of a ball race and a number of ball bearings that roll within it. Swivel Castors can either have a single ball race or a double ball race. They perform the same function. The double ball race was developed for medium and heavy applications. This is because they are compact, perform well under static and dynamic loads and provide excellent steerability.
Swivel castors can be fitting with locks which lock (brake) wither the wheel or the swivel head or both. See Brake Castors.
Swivel Castor Components
Swivel Castor Offset
The Swivel Castor's offset it the distance from the swivel axis to the centre of the wheel (where it is secured to the castor frame). It is the reason a swivel castor will go in the direction you want it to go regardless its starting direction. The offset and castor wheel's diameter make up the swivel radius where the swivel radius = Offset + (Wheel Diameter / 2).
This is the radius of circle described but the outer dimension of the wheel swivelling around the vertical axis. Basically, this is important because it tells you how much room is needed for the swivel caster to swivel. Furthermore, the general rule is the bigger the offset the better the castor's running performance but the lower the weight it can carry. Read More
- Display 15 Products per page
- In Stock
50mm Low Level Swivel Castor, 270kg Capacity | Steel Wheel, Plain Bore (2SL050ST0L)
£27.7850mm Low Level Twin Wheel Swivel Castor (Revvo Bra... Read Morend). The steel wheels each have a tread width of 14mm and turn on a smooth Plain Bore. The Load Capacity of 270kg.This castors offers an exceptional load capacity in relation to their low overall working height and is ideal for heavy equipment being used on smooth, hard flooring. The differential action from the twin wheels makes for smooth operation.This castor has a round top plate with a diameter of 95mm and 4 fixing holes to suit a 6mm bolt. Each fixing hole is spaced 51mm from the directly opposite fixing hole (the largest distance between the fixing holes) - Out of Stock - On the Way
- In Stock
200mm Swivel Castor, 500kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (822SUB)
£96.83200mm Top Plate Swivel Castor (Pressed Steel) with... Read More 105x80 Hole Centres. Polyurethane Tyre / Cast Iron Centre Wheel with Roller Bearing. Load Capacity = 500kg