Swivel Castors
Swivel Castors and wheels can swivel 360 degrees about the vertical axis (see figure below). They consist of a housing and a caster wheel. The housing itself is made up of a plate fitting, swivel bearings and a yoke. The Yoke is often referred to as the castor's frame (see figure below).The plate fitting determines how the... castor is going to be attached to the equipment. It is usually either a single bolt hole fitting or a plate fixing which is generally square, rectangular or triangular. Plate fittings are usually bolted to equipment so knowing your required bolt hole centres is important. The Swivel Head consists of a ball race and a number of ball bearings that roll within it. Swivel Castors can either have a single ball race or a double ball race. They perform the same function. The double ball race was developed for medium and heavy applications. This is because they are compact, perform well under static and dynamic loads and provide excellent steerability.
Swivel castors can be fitting with locks which lock (brake) wither the wheel or the swivel head or both. See Brake Castors.
Swivel Castor Components
Swivel Castor Offset
The Swivel Castor's offset it the distance from the swivel axis to the centre of the wheel (where it is secured to the castor frame). It is the reason a swivel castor will go in the direction you want it to go regardless its starting direction. The offset and castor wheel's diameter make up the swivel radius where the swivel radius = Offset + (Wheel Diameter / 2).
This is the radius of circle described but the outer dimension of the wheel swivelling around the vertical axis. Basically, this is important because it tells you how much room is needed for the swivel caster to swivel. Furthermore, the general rule is the bigger the offset the better the castor's running performance but the lower the weight it can carry. Read More
- Display 15 Products per page
In Stock50mm Swivel Castor, 55kg Capacity | Rubber Tyre Wheel, Plain Bore (2KS050TPRPL)
£10.1250mm Twin Wheel Top Plate Swivel Castor (Pressed S... Read Moreteel) with 46x46mm Fixing Holes. Grey Thermoplastic Rubber Tyre / Polypropylene Centre Wheel with Plain Bore. Load Capacity = 55kg- Out of Stock - On the Way
50mm Swivel Castor, 60kg Capacity | Nylon Wheel, Plain Bore (2KS050NYPL)
£6.0650mm Twin Wheel Top Plate Swivel Castor (Pressed S... Read Moreteel) with 38.5/48x38.5/48mm Fixing Bolt Holes. Nylon Wheel with Plain Bore. Load Capacity = 60kg - In Stock
50mm Swivel Castor, 60kg Capacity | Polypropylene wheel, Plain Bore (2KS050PPPL)
£6.1850mm Twin Wheel Top Plate Swivel Castor (Pressed S... Read Moreteel) with 38.5/48x38.5/48mm Fixing Holes. Black Polypropylene Wheel with Plain Bore. Load Capacity = 60kg - In Stock
60mm Compact Swivel Brake Castor, 150kg Capacity | Polyurethane Tyre Wheel, Ball bearing (KS060PT2BBHBR)
£22.0560mm Low Level swivel with brake castor and 12mm S... Read Moreingle Bolt Hole Fixing. This Low Level compact castor has an overall height of 80mm and an Orange Polyurethane Wheel on a steel centre with a 35mm Tread Width and Ball bearings. Load Capacity = 150kg - In Stock
60mm Compact Swivel Castor, 150kg Capacity | 60mm Polyurethane Tyre Wheel, Ball bearing (KS060PT2B)
£20.2660mm Low Level swivel castor with 105x80mm Top Pla... Read Morete and 80x60mm Fixing Bolt Hole Centres. This Low Level compact castor has an overall height of 80mm and an Orange Polyurethane Wheel on a steel centre with a 35mm Tread Width and Ball bearings. Load Capacity = 150kg - In Stock
60mm Compact Swivel Castor, 150kg Capacity | Polyurethane Tyre Wheel, Ball bearing (KS060PT2BBH)
£20.0460mm Low Level swivel castor with 12mm Single Bolt... Read More Hole Fixing. This Low Level compact castor has an overall height of 80mm and an Orange Polyurethane Wheel on a steel centre with a 35mm Tread Width and Ball bearings. Load Capacity = 150kg - In Stock
60mm Compact Twin Wheel Swivel Castor, 200kg Capacity | Polyurethane Tyre Wheel, Ball bearing (2KS060PT2B)
£23.4860mm Low Level twin wheel swivel castor with 105x8... Read More0mm Top Plate and 80/76x60mm Fixing Bolt Hole Centres. This Low Level compact castor has an overall height of 80mm and an Orange Polyurethane Wheel on a steel centre with a 2x19mmTread Width (41mm across both wheels) and Ball bearings. Load Capacity = 150kg.The swivel head has a double ball race for excellent swivelling and the polyurethane tyres have a 95 Shore A hardness. - In Stock
60mm Swivel Castor, 120kg Capacity | Nylon Wheel, Plain Bore (MSVH060NY0B)
£8.9860mm Single Bolt Hole Swivel Castor to suit 12m... Read Morem bolt. The castor bracket is made from pressed steel and houses a solid nylon Wheel with a plain bore (without a bearing).
This castor's load capacity is rated to 120kg using manual propulsion at 4km/h making it a great castor choice for most applications that require a small castor.
This single bolt hole castor can be fitted with an expander fitting and requires a ACZ500 bolt hole reducer to reduce the 12mm bolt hole to a 10mm bolt hole to fit the expander fitting's bolt that is 10mm.
- In Stock
60mm Twin Wheel Swivel Castor | Polyurethane Tyre Wheel, Ball Bearing, 150kg Capacity (GAJSD60ASFHUD)
Original price was: £139.12.£67.21Current price is: £67.21.Sale!60mm Swivel Castor with Dual Polyurethane ... Read MoreTyres for AGVsMaximize your AGV’s performance with our high-quality Automated Guided Vehicle Castors. This 70mm swivel castor features dual (twin) polyurethane tyres mounted on durable aluminium centres, complemented by precision ball bearings. Designed to meet the high demands of AGV applications, this castor ensures smooth, efficient, and reliable operation in industrial settings.The black powder-coated bracket offers superior protection compared to standard zinc-plated frames, enhancing durability in harsh environments. Its low overall height of just 87mm makes it ideal for compact AGV systems, ensuring stability without compromising load capacity—supporting up to 150kg (450kg over 4 castors).Key Specifications:
- Top Plate Fixing: 86x61mm bolt hole spacing with 9mm drilled holes, suited for 8mm bolts.
- Dual Polyurethane Tyres: 95 Shore A hardness for low tractive resistance, smooth and quiet operation.
- Non-Marking Tyres: Protects floors and reduces maintenance costs.
- Robust Swivel Bracket: Double ball race swivel head for enhanced manoeuvrability and durability.
Benefits:
- Optimized for AGVs: Engineered for automated guided vehicles, ensuring reliable, continuous performance.
- Smooth, Quiet Operation: Polyurethane tyres reduce rolling resistance and noise, enhancing efficiency.
- Long-Lasting Durability: Strong aluminium centres and black powder-coated brackets for extended lifespan.
- Out of Stock - On the Way
63mm Black Footmaster Levelling Castor, Plate Fitting, 550kg Capacity | 63mm Nylon Wheel (KGD-80FBLACK)
£51.3663mm Foot Master Levelling Castor with an Black po... Read Morewder coating finish. This product has a 4-hole top plate with 70mm x 70mm bolt hole centres and is also powder coated for added protection. The wheel is made from premium quality black Nylon with a 28mm Tread width and the Die Cast Aluminium Foot Pad has a rubber vibration damping pad. This foot pad has a Nylon Hand-wheel operationThis product's load capacity has increased to 550kg Static Load and 275kg Dynamic Load.Because of the lifting and lowering function of the Foot Master castor, like all Jacking Castors, it is important understand that each castor may be subjected to HALF THE TOTAL WEIGHT. Therefore, the recommended load capacity for each Foot Master Levelling Castor is half the castor's Static Load Capacity, that is, when the castors' levelling function is not being used. The load capacity of the Footmaster Castor when it is being moved and positioned is given by the Dynamic Load Capacity.This levelling castor is a multi-functional swivel castor that provides mobility, levelling and anti-vibration functions. This allows users to move and position large equipment into place with added stability using the levelling and anti-vibration features. - In Stock
63mm Black Footmaster Levelling Castor, Stem Fitting, 550kg Capacity | 63mm Nylon Wheel (KGD-80SBLACK)
£48.0963mm Footmaster Levelling Castor with an M12 x 18m... Read Morem Threaded Stem finished in Finished with a Black powder coating. This product has a black Nylon Wheel with a 28mm Tread width, Die Cast Aluminium Foot Pad with a vibration damping rubber pad. This foot pad has a Nylon Hand-wheel operation.This product's load capacity has increased to 550kg Static Load and 275kg Dynamic Load.Because of the lifting and lowering function of the Footmaster Levelling castor, like all Jacking Castors, it is important understand that each castor may be subjected to HALF THE TOTAL WEIGHT. Therefore, the recommended load capacity for each Foot Master Levelling Castor is half the castor's Static Load Capacity, that is, when the castors' levelling function is not being used. The load capacity of the Footmaster Castor when it is being moved and positioned is given by the Dynamic Load Capacity.This levelling castor is a multi-functional swivel castor that provides mobility, levelling and anti-vibration functions. This allows users to move and position large equipment into place with added stability using the levelling and anti-vibration features. - In Stock
63mm Footmaster Castor with Levelling Foot, 500kg Capacity | 63mm Nylon Wheel, Plain Bore (KGDH65ASFNYN)
Original price was: £67.01.£39.75Current price is: £39.75.Sale!This 63mm Swivel Castor has Black Nylon wheel (pla... Read Morein bore) with an extra long adjustable foot (GDH-65-ASF-NYN). The aluminium castor frame has a durable ivory coloured powder coating for protection against wear and tear.The Threaded section of the Adjustable Foot extends a maximum of 60mm above the top of the top plate (78mm including the hex head). The Hex Head can be operated by a drill for quick operation.The overall height of the castor is 98mm and the adjustable foot can extend by up to 48mm to enable precise levelling.The load capacity is 500kg and the recommended maximum total load to be carried by 4 castors is 1,500kg. - In Stock
63mm Footmaster Castor with Levelling Foot, 500kg Capacity | 63mm Nylon Wheel, Plain Bore (KGDL65ASFNYN)
Original price was: £65.23.£39.74Current price is: £39.74.Sale!This 63mm Heavy Duty Levelling Castor with a Black... Read More Nylon wheel (Ball Bearing) and adjustable foot (GDL-65-ASF-NYN). This castor is a swivel castor with a load capacity of 500kg. The aluminium castor frame has a durable ivory coloured powder coating for protection against wear and tear.The overall height of the castor is 98mm and the adjustable foot can extend by up to 18mm to enable precise levelling.The load capacity of this product is 500kg and the recommended maximum total load over 4 castors is 1,500kg. - In Stock
63mm Footmaster Levelling Castor, 500kg Capacity | 63mm Nylon Wheel (KGDR-80F)
£65.0763mm Footmaster Levelling Castor with Top Plate Fi... Read Moretting. 500kg Static and 250kg Dynamic Load Capacity Die Cast Aluminium Foot Pad With Vibration Damping Rubber Pad. Nylon Handwheel with Retractable Ratchet.The Footmaster levelling castor is a multi-functional swivel castor that provides mobility, levelling and anti-vibration functions. This allows users to move and position large equipment into place with added stability using the levelling and anti-vibration features.Because of the lifting and lowering function of the Foot Master castor, like all Jacking Castors, it is important understand that each castor may be subjected to HALF THE TOTAL WEIGHT. Therefore, the recommended load capacity for each Foot Master Levelling Castor is half the castor's Static Load Capacity, that is, when the castors' levelling function is not being used. The load capacity of the Footmaster Castor when it is being moved and levelled is given by the Dynamic Load Capacity. - In Stock
63mm Footmaster Levelling Castor, 500kg Capacity | 63mm Nylon Wheel (KGDR-80S)
£68.4463mm Footmaster Levelling Castor with M12 x 18m... Read Morem Threaded Stem Fitting. 500kg Static and 250kg Dynamic Load Capacity Die Cast Aluminium Foot Pad With Vibration Damping Rubber Pad. Nylon Handwheel with Retractable Ratchet.
The Footmaster levelling castor is a multi-functional swivel castor that provides mobility, levelling and anti-vibration functions. This allows users to move and position large equipment into place with added stability using the levelling and anti-vibration features.
Because of the lifting and lowering function of the Foot Master castor, like all Jacking Castors, it is important understand that each castor may be subjected to HALF THE TOTAL WEIGHT. Therefore, the recommended load capacity for each Foot Master Levelling Castor is half the castor's Static Load Capacity, that is, when the castors' levelling function is not being used. The load capacity of the Footmaster Castor when it is being moved and positioned is given by the Dynamic Load Capacity.
This load capacity of the Footmaster Castor when being moved and positioned is given by the Dynamic Load Capacity.
