Swivel Castors
Swivel Castors and wheels can swivel 360 degrees about the vertical axis (see figure below). They consist of a housing and a caster wheel. The housing itself is made up of a plate fitting, swivel bearings and a yoke. The Yoke is often referred to as the castor's frame (see figure below).The plate fitting determines how the... castor is going to be attached to the equipment. It is usually either a single bolt hole fitting or a plate fixing which is generally square, rectangular or triangular. Plate fittings are usually bolted to equipment so knowing your required bolt hole centres is important. The Swivel Head consists of a ball race and a number of ball bearings that roll within it. Swivel Castors can either have a single ball race or a double ball race. They perform the same function. The double ball race was developed for medium and heavy applications. This is because they are compact, perform well under static and dynamic loads and provide excellent steerability.
Swivel castors can be fitting with locks which lock (brake) wither the wheel or the swivel head or both. See Brake Castors.
Swivel Castor Components
Swivel Castor Offset
The Swivel Castor's offset it the distance from the swivel axis to the centre of the wheel (where it is secured to the castor frame). It is the reason a swivel castor will go in the direction you want it to go regardless its starting direction. The offset and castor wheel's diameter make up the swivel radius where the swivel radius = Offset + (Wheel Diameter / 2).
This is the radius of circle described but the outer dimension of the wheel swivelling around the vertical axis. Basically, this is important because it tells you how much room is needed for the swivel caster to swivel. Furthermore, the general rule is the bigger the offset the better the castor's running performance but the lower the weight it can carry. Read More
- Display 15 Products per page
In Stock100mm Stainless Steel Swivel Castor, 150kg Capacity | Rubber Tyre Wheel, Roller Bearing (MSS100RNBBH)
£25.40100mm Bolt Hole Swivel Castor (Stainless Steel Cas... Read Moretor) with 12mm Bolt Hole. Blue Rubber Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 150kg- In Stock
100mm Stainless Steel Swivel Castor, 370kg Capacity | Nylon Wheel, Ball Bearings (33605)
£96.52100mm Heavy Duty Top Plate Swivel Castor and nylon... Read More wheel with ball bearings. The top plate and frames are made from AISI 304 Stainless Steel Castor and the Stainless Steel balls from AISI 420. This castor has a 137mm overall height.Upgrade your equipment with our 100mm Heavy Duty Stainless Steel Swivel Castor, designed for superior performance in demanding environments. Ideal for both industrial and domestic applications, this castor is built to resist corrosion and heavy use. The swivel head includes a double ball race with a hardened ball race track, ensuring smooth and reliable movement.Key Features:- Load Capacity: Supports up to 370kg, making it ideal for heavy loads.
- Top Plate Dimensions: Measures 105x80mm, with fixing bolt hole centres at 80x60mm and accommodates 8mm bolts for easy installation.
- Wheel Material: The castor features a white nylon (polyamide) wheel with a 37mm tread width, designed to provide non-marking performance.
- Precision Bearings: Fitted with two precision ball bearings, this castor offers the lowest rolling and swivel resistance in its class, ensuring effortless movement even under heavy loads.
- In Stock
100mm Swivel Castor | Polyurethane Tyre Wheel, Roller Bearing, 180kg Capacity (MSZ100PN1B)
Original price was: £11.96.£8.97Current price is: £8.97.Sale!100mm Red Polyurethane Tyre Wheel on a Nylon Centr... Read Moree with a roller bearing fitted into a pressed steel swivel castor bracket. The Swivel Bracket has a 4 hole top plate with 80x60mm bolt hole spacing. The load capacity of this castor is 180kg using manual propulsion at 4km/h (walking speed)The Polyurethane tyre offers a low tractive resistance making it easier to get moving compared with softer rubber tread wheels. It is also a bit softer than hard tread wheels making the castor smoother and quieter running. The polyurethane tyre is also non-marking and gentle on floors while the roller bearing lowers the rolling resistance to reduce the effort required to move the castors. Put this wheel into a strong bracket that has a double ball race in the swivel head and you have a castor that is a great choice for the wide range of industrial and domestic applications. - In Stock
100mm Swivel Castor, 100kg Capacity | Rubber Tyre Wheel, Ball Bearing (KAHS100TPR)
£9.86This apparatu... Read Mores / institutional castor comes with a 100mm Grey Thermoplastic Rubber Tyre Wheel on a nylon centre fitted into a 10mm Single Bolt Hole Swivel Castor (Pressed Steel Frame) with a double ball race swivel head. The load capacity of this castor is 100kg using manual propulsion at 4km/h
This castor is fitted with a grey rubber tyre that will not mark or damage the floor and is ideal for most general, light duty castor purposes such as trolley castors or dolly castors. The Ball Bearing in the wheel provides excellent rolling performance.
Single Bolt Hole castors can have a expander tube fitting (purchased separately) attached to insert into hollow square or round tubing. See our section on Expander Tube Fittings
- In Stock
100mm Swivel Castor, 125kg Capacity | Polypropylene Wheel, Plain Bore (LSV100PP)
£6.38100mm Swivel Castor with a White Polypropylene Whe... Read Moreel fitted. It has 80x60mm fixing bolt hole centres and the load capacity of this castor is 125kg using manual propulsion at 4km/hThis is one of our most popular castors and the White Polypropylene wheel is non-marking and won't damage concrete floors. Because it is a hard tread it has the lowest rolling and swivelling resistance. It is ideal as a new component or a replacement caster for most general purpose domestic or industrial castor where the travel speed of the castor generally does not exceed walking speed. - In Stock
100mm Swivel Castor, 150kg Capacity | Nylon Wheel, Ball Bearing (1321728)
£9.46100mm Top Plate Swivel Castor (Pressed Steel) w... Read Moreith 80x60 Hole Centres. Nylon Wheel with Ball Bearing. Load Capacity = 150kg
This is a 4 hole plate fitting castor and the bolt holes suit an 8mm bolt as well as being slotted (rather than round) to accommodate 80/76mm x 60x44.5mm.
- In Stock
100mm Swivel Castor, 150kg Capacity | Nylon Wheel, Ball Bearing (MSV100NY2B)
£8.45100mm White Nylon Wheel with a ball bearing fit... Read Moreted into a pressed steel swivel castor bracket. The Swivel Bracket has a 4 hole top plate with 80x60mm bolt hole spacing. The load capacity of this castor is 150kg using manual propulsion at 4km/h (walking speed)
The Nylon Wheel is a hard wheel giving it a low tractive resistance which makes it it easier to get moving compared with softer rubber tread wheels. The strength of nylon and because it wont damage concrete floors makes it one of the most popular choices. The ball bearing lowers the rolling resistance to reduce the effort required to move the castors. Put this wheel into a strong bracket that has a double ball race in the swivel head makes this castor a great choice for the widest range of industrial and domestic applications.</p>
- In Stock
100mm Swivel Castor, 150kg Capacity | Nylon Wheel, Ball Bearing, (1321788)
£9.22100mm Bolt Hole Swivel Castor (Pressed Steel) with... Read More 10mm Bolt Hole. Nylon Wheel with Ball Bearing. Load Capacity = 150kg - In Stock
100mm Swivel Castor, 150kg Capacity | Nylon Wheel, Ball Bearing, (MSVH100NY2B)
£8.19100mm Single Bolt Hole (12mm) Pressed Steel Swivel... Read More Castor. This castor has Nylon Wheel with a Single Ball Bearing. The Load Capacity is 150kg using manual propulsion at 4km/h. - In Stock
100mm Swivel Castor, 150kg Capacity | Nylon Wheel, Plain Bore (1321720)
£8.24100mm Top Plate Swivel Castor (Pressed Steel) w... Read Moreith 80x60 Hole Centres. Nylon Wheel with Plain Bore. Load Capacity = 150kg
This is a 4 hole plate fitting castor and the bolt holes suit an 8mm bolt as well as being slotted (rather than round) to accommodate 80/76mm x 60x44.5mm.
- In Stock
100mm Swivel Castor, 150kg Capacity | Nylon Wheel, Plain Bore (1321780)
£7.29100mm Bolt Hole Swivel Castor (Pressed Steel) with... Read More 10mm Bolt Hole. Nylon Wheel with Plain Bore. Load Capacity = 150kg - In Stock
100mm Swivel Castor, 150kg Capacity | Nylon Wheel, Roller Bearing (MSV100NY1B)
£7.35100mm White Nylon Wheel with a roller bearing f... Read Moreitted into a pressed steel swivel castor bracket. The Swivel Bracket has a 4 hole top plate with 80x60mm bolt hole spacing. The load capacity of this castor is 150kg using manual propulsion at 4km/h (walking speed)
The Nylon Wheel is a hard wheel giving it a low tractive resistance which makes it it easier to get moving compared with softer rubber tread wheels. The strength of nylon and because it wont damage concrete floors makes it one of the most popular choices. The roller bearing lowers the rolling resistance to reduce the effort required to move the castors. Put this wheel into a strong bracket that has a double ball race in the swivel head makes this castor a great choice for the widest range of industrial and domestic applications.
- In Stock
100mm Swivel Castor, 150kg Capacity | Nylon Wheel, Roller Bearing (MSVH100NY1B)
£6.34100mm White Nylon Wheel with a roller bearing f... Read Moreitted into a pressed steel single bolt hole swivel castor bracket. The Swivel Bracket has a 12mm Single Bolt Hole top plate. The load capacity of this castor is 150kg using manual propulsion at 4km/h (walking speed)
The Nylon Wheel has a low tractive resistance making it easier to get moving compared with softer rubber tread wheels. Together with the strength of nylon and because it wont damage concrete floors, this makes nylon wheel castors probably the most popular choice. The roller bearing lowers the rolling resistance to reduce the effort required to move the castors. Put this wheel into a strong bracket that has a double ball race in the swivel head makes this castor a great choice for the widest range of industrial and domestic applications.
- In Stock
100mm Swivel Castor, 150kg Capacity | Polyurethane Tyre Wheel with Roller Bearing (1321786)
£12.52100mm Bolt Hole Swivel Castor (Pressed Steel) with... Read More 10mm Single Bolt Fixing Hole. Polyurethane Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 150kg - In Stock
100mm Swivel Castor, 150kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (MSV100PN2B)
£9.12100mm Red Polyurethane Tyre Wheel on a Nylon Centr... Read Moree with a ball bearing fitted into a pressed steel swivel castor bracket. The Swivel Bracket has a 4 hole top plate with 80x60mm bolt hole spacing. The load capacity of this castor is 150kg using manual propulsion at 4km/h (walking speed)The Polyurethane tyre offers a low tractive resistance making it easier to get moving compared with softer rubber tread wheels. It is also a bit softer than hard tread wheels making the castor smoother and quieter running. The polyurethane tyre is also non-marking and gentle on floors while the ball bearing lowers the rolling resistance to reduce the effort required to move the castors. Put this wheel into a strong bracket that has a double ball race in the swivel head and you have a castor that is a great choice for the wide range of industrial and domestic applications.</p>
