Swivel Castors
Swivel Castors and wheels can swivel 360 degrees about the vertical axis (see figure below). They consist of a housing and a caster wheel. The housing itself is made up of a plate fitting, swivel bearings and a yoke. The Yoke is often referred to as the castor's frame (see figure below).The plate fitting determines how the... castor is going to be attached to the equipment. It is usually either a single bolt hole fitting or a plate fixing which is generally square, rectangular or triangular. Plate fittings are usually bolted to equipment so knowing your required bolt hole centres is important. The Swivel Head consists of a ball race and a number of ball bearings that roll within it. Swivel Castors can either have a single ball race or a double ball race. They perform the same function. The double ball race was developed for medium and heavy applications. This is because they are compact, perform well under static and dynamic loads and provide excellent steerability.
Swivel castors can be fitting with locks which lock (brake) wither the wheel or the swivel head or both. See Brake Castors.
Swivel Castor Components
Swivel Castor Offset
The Swivel Castor's offset it the distance from the swivel axis to the centre of the wheel (where it is secured to the castor frame). It is the reason a swivel castor will go in the direction you want it to go regardless its starting direction. The offset and castor wheel's diameter make up the swivel radius where the swivel radius = Offset + (Wheel Diameter / 2).
This is the radius of circle described but the outer dimension of the wheel swivelling around the vertical axis. Basically, this is important because it tells you how much room is needed for the swivel caster to swivel. Furthermore, the general rule is the bigger the offset the better the castor's running performance but the lower the weight it can carry. Read More
- Display 15 Products per page
- In Stock
200mm Swivel Castor, 500kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (KSMG200RUB)
£57.62200mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith 105x80 Hole Centres. Rubber Tyre / Cast Iron Centre Wheel with Ball Bearing. Load Capacity = 500kg - In Stock
125mm Swivel Castor, 250kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (522PNB)
£28.81125mm Top Plate Swivel Castor (Pressed Steel) with... Read More 80x60 Hole Centres. Polyurethane Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 250kg - In Stock
200mm Swivel Castor, 535kg Capacity | Rubber Tyre Wheel, Ball Bearing, (TSH200RU2H)
£133.07200mm Heavy Duty Top Plate Swivel Castor (Fabri... Read Morecated Castor) with 105x80 Hole Centres. Rubber Tyre / Cast Iron Centre Wheel with Ball Bearing. Load Capacity = 535kg
Features of the H Series Castor
- The Genuine Revvo H Series castor is made from heavy gauge forged steel with a hardened ball race in the swivel race that serve as both thrust and radial bearings.
- The swivel head comes with a metal swivel seal and hydraulic grease nipple
- The closed base of the swivel ring prevents downward escape of lubricant
- The side plates are press formed to a cylindrical shape to give the best strength to weight ratio
- A four way direction lock can be purchased and fitted to the castor 9999-0181
- In Stock
100mm Swivel Castor, 150kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (MSV100PN2B)
£9.12100mm Red Polyurethane Tyre Wheel on a Nylon Ce... Read Morentre with a ball bearing fitted into a pressed steel swivel castor bracket. The Swivel Bracket has a 4 hole top plate with 80x60mm bolt hole spacing. The load capacity of this castor is 150kg using manual propulsion at 4km/h (walking speed)
The Polyurethane tyre offers a low tractive resistance making it easier to get moving compared with softer rubber tread wheels. It is also a bit softer than hard tread wheels making the castor smoother and quieter running. The polyurethane tyre is also non-marking and gentle on floors while the ball bearing lowers the rolling resistance to reduce the effort required to move the castors. Put this wheel into a strong bracket that has a double ball race in the swivel head and you have a castor that is a great choice for the wide range of industrial and domestic applications.</p>
- In Stock
125mm Heavy Duty Swivel Castor, 700kg Capacity | White Nylon Wheel, Ball Bearing (HSV125NY2B)
£29.49125mm Heavy Duty Top Plate Swivel Castor with Heav... Read Morey Gauge Pressed Steel and a load capacity of 700kg. The swivel head has a double ball race with hardened ball race track.- The Top Plate measure 105x80mm with 80x60mm Fixing Bolt Hole Centres. The bolt holes are slotted to 80/75x60/55mm and suits 8mm Bolts.
- The castor wheel is a white nylon wheel (polyamide) with a 40mm tread width and fitted with two precision ball bearings. The hard wheel is non-marking and has the lowest rolling and swivel resistance.
- This castor is an excellent all purpose heavy duty castor. It is often used with high load mobile storage and transportation equipment in domestic, mechanical and industrial applications.
- In Stock
125mm Swivel Castor, 300kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (KS125PCB300)
£61.01125mm Top Plate Swivel Castor (Industrial Castor) ... Read Morewith 80x60 Hole Centres. Polyurethane Tyre / Cast Iron Centre Wheel with Ball Bearing. Load Capacity = 300kg - In Stock
125mm Swivel Castor, 150kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (MSVH125PN1B)
£10.49125mm Single Bolt Hole (12mm) Swivel Castor (Press... Read Moreed Steel). Polyurethane Tyred / Nylon Centred Wheel with Roller Bearing. Load Capacity = 150kg - In Stock
100mm Stainless Steel Swivel Castor, 150kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (MSS100PNB)
£23.64100mm Top Plate Swivel Castor (Stainless Steel Cas... Read Moretor) with 80x60mm Bolt Hole Centres. Polyurethane Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 150kg - In Stock
100mm Swivel Castor, 225kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (TS4100PT14)
£39.45100mm Top Plate Swivel Castor (Pressed Steel). Wit... Read Moreh a top plate of 135x110mm and 105x80mm bolt hole centres, this castor has a larger top plate than most 100mm castors. The wheel is a Revvo 100PT14 which is a Polyurethane Tyre on a Cast Iron Wheel complete with Needle Roller Bearing. Load Capacity = 225Kg - In Stock
80mm Stainless Steel Swivel Castor, 150kg Capacity | Nylon Wheel, Plain Bore (MSS080NYBH)
£16.8780mm Bolt Hole Swivel Castor (Stainless Steel Cast... Read Moreor) with 12mm Bolt Hole. Nylon Wheel with Plain Bore. Load Capacity = 150kg - In Stock
80mm Stainless Steel Swivel Castor, 120kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (MSS080PNB)
£20.0580mm Top Plate Swivel Castor (Stainless Steel Cast... Read Moreor) with 80x60 Hole Centres. Polyurethane Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 120kg - Out of Stock - On the Way
100mm Swivel Castor, 270kg Capacity | Nylon Wheel, Roller Bearing (461NYB)
£12.17100mm Top Plate Swivel Castor (Flexello 61 Series)... Read More with 105x80mm Fixing Bolt Hole Centres. White Nylon Wheel fitted with a Roller Bearing. This is a robust castor with a load Capacity of 270kg using manual propulsion at 4km/h.The Flexello 61 Series is an established industry standard range of Pressed Steel Castors that is suitable for most industrial castor uses. This range has a ball bearing swivel head and finished with a bright zinc plating. This range has a larger top plate than most 100mm castors with the castor's top plate measuring 128x102mm. - In Stock
125mm Stainless Steel Swivel Castor, 150kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (MSS125PNB)
£29.53125mm Top Plate Swivel Castor (Stainless Steel Cas... Read Moretor) with 80x60 Hole Centres. Polyurethane Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 150kg - In Stock
160mm Swivel Castor, 800kg Capacity | Polyurethane Tyre Wheel, Ball bearing (4670FTP160P63)
£102.49160mm Top Plate Swivel Castor (Pressed Steel) With... Read More 105X80mm Bolt Hole Centres. This very heavy duty castor houses an extremely strong Polyurethane Tyre Wheel on a Cast Iron Centre Wheel With Ball Bearing. Load Capacity = 800Kg - In Stock
100mm Swivel Castor, 150kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (MSV100PN1B)
£9.51100mm Red Polyurethane Tyre Wheel on a Nylon Ce... Read Morentre with a roller bearing fitted into a pressed steel swivel castor bracket. The Swivel Bracket has a 4 hole top plate with 80x60mm bolt hole spacing. The load capacity of this castor is 150kg using manual propulsion at 4km/h (walking speed)
The Polyurethane tyre offers a low tractive resistance making it easier to get moving compared with softer rubber tread wheels. It is also a bit softer than hard tread wheels making the castor smoother and quieter running. The polyurethane tyre is also non-marking and gentle on floors while the roller bearing lowers the rolling resistance to reduce the effort required to move the castors. Put this wheel into a strong bracket that has a double ball race in the swivel head and you have a castor that is a great choice for the wide range of industrial and domestic applications.