![Swivel Castors](https://www.keystonecastors.co.uk/wp-content/uploads/2023/06/150mm-Swivel-Castor-with-Red-Polyurethane-Tyre-White-Nylon-Centre-Wheel-622PNB-scaled.jpg)
Swivel Castors
Swivel Castors and wheels can swivel 360 degrees about the vertical axis (see figure below). They consist of a housing and a caster wheel. The housing itself is made up of a plate fitting, swivel bearings and a yoke. The Yoke is often referred to as the castor's frame (see figure below).The plate fitting determines how the... castor is going to be attached to the equipment. It is usually either a single bolt hole fitting or a plate fixing which is generally square, rectangular or triangular. Plate fittings are usually bolted to equipment so knowing your required bolt hole centres is important. The Swivel Head consists of a ball race and a number of ball bearings that roll within it. Swivel Castors can either have a single ball race or a double ball race. They perform the same function. The double ball race was developed for medium and heavy applications. This is because they are compact, perform well under static and dynamic loads and provide excellent steerability.
Swivel castors can be fitting with locks which lock (brake) wither the wheel or the swivel head or both. See Brake Castors.
Swivel Castor Components
![Swivel Castor Components Diagram](https://www.keystonecastors.co.uk/wp-content/uploads/2023/09/Swivel-Castor-Components-Drawing-293x300.jpg)
Swivel Castor Offset
The Swivel Castor's offset it the distance from the swivel axis to the centre of the wheel (where it is secured to the castor frame). It is the reason a swivel castor will go in the direction you want it to go regardless its starting direction. The offset and castor wheel's diameter make up the swivel radius where the swivel radius = Offset + (Wheel Diameter / 2).
This is the radius of circle described but the outer dimension of the wheel swivelling around the vertical axis. Basically, this is important because it tells you how much room is needed for the swivel caster to swivel. Furthermore, the general rule is the bigger the offset the better the castor's running performance but the lower the weight it can carry. Read More
- Display 15 Products per page
- In Stock
200mm Swivel Castor, 600kg Capacity | Polyurethane Tyre Wheel, Ball bearing (KSMG200CRPCB)
£84.47200mm Swivel Castor (Fabricated Steel) and Crown T... Read Moreread Polyurethane Tyred / Cast Iron Centre Wheel with Ball Bearing. Load Capacity = 600kg - In Stock
125mm Stainless Steel Swivel Castor, 150kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (MSS125PNBBH)
£34.67125mm Bolt Hole Swivel Castor (Stainless Steel Cas... Read Moretor) with 12mm Bolt Hole. Polyurethane Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 150kg - In Stock
80mm Swivel Castor, 130kg | Nylon Wheel, Roller Bearing (XSBH080NYB130)
Original price was: £5.38.£5.22Current price is: £5.22. Sale!80mm Swivel Castor with a 12mm Single Bolt Hole Fi... Read Moretting. This castor houses a white nylon wheel with roller bearings and has a load capacity of 130kg using manual propulsion at 4 km/h (walking speed) - In Stock
60mm Compact Swivel Castor, 150kg Capacity | Polyurethane Tyre Wheel, Ball bearing (KS060PT2BBH)
£19.3660mm Low Level swivel castor with 12mm Single Bolt... Read More Hole Fixing. This Low Level compact castor has an overall height of 80mm and an Orange Polyurethane Wheel on a steel centre with a 35mm Tread Width and Ball bearings. Load Capacity = 150kg - In Stock
100mm Swivel Castor, 900kg Capacity | Nylon Wheel, Ball bearing (GXT100ASFMCD)
Original price was: £190.54.£123.86Current price is: £123.86. Sale!100mm Machine... Read More Cast Nylon Wheel fitted into an extra strong Fabricated Top Plate Swivel Castor with a double thrust bearing in the swivel head to optimise the load capacity. The fixing bolt spacings are the European Standard size of 80x60mm. The load capacity of this castor is 900kg at 4km/h
This high performance castor is fitted with a white machine cast nylon wheel that will not mark the floor. The extra strong welded castor frame is powder coated to protect the frame and top plate and it is fitted with a high performance castor wheel containing two ball bearings. The bearings turn on a specially designed integrated axle shaft arrangement making this castor one of the most durable in the market. Perfect for moving very heavy loads where strength, durability and performance are critical.
The double thrust bearing in the swivel head optimise heavy loads
- In Stock
100mm Swivel Castor, 250kg Capacity | Nylon Wheel, Plain Bore (MSK100NY)
£10.18100mm Top Plate Swivel Castor (Pressed Steel) with... Read More 80x60 Hole Centres. Nylon Wheel with Plain Bore. Load Capacity = 250kg - In Stock
125mm Swivel Castor, 1100kg Capacity | Polyurethane Tyre Wheel, Ball bearing (GXT125ASFHUD)
Original price was: £414.41.£269.37Current price is: £269.37. Sale!125mm Polyure... Read Morethane tyre Wheel with an aluminium centre fitted into an extra strong Fabricated Top Plate Swivel Castor with 148/132x111/99mm bolt hole centres. The slotted bolt holes cover the European and UK standard 140x105mm bolt holes. The load capacity of this castor is 1100kg at 4km/h
This high performance castor is fitted with a quality polyurethane tyre wheel that will not mark the floor. An extra strong welded castor frame that is powder coated and fitted with a high performance castor wheel containing two ball bearings that turns on a specially designed integrated axle shaft arrangement makes this castor one of the most durable in the market. Perfect for moving very heavy loads where strength, durability and performance are critical
The swivel head of the 125mm - 250mm sizes of the GXT range come with a thrust bearing and a taper roller bearing in the swivel head.
- In Stock
125mm Swivel Castor, 100kg Capacity | Rubber Tyre Wheel, Ball Bearing (KAHS125TPR)
£11.73This apparatus /... Read More institutional castor comes with a 125mm Grey Thermoplastic Rubber Tyre Wheel on a nylon centre fitted into a 10mm Single Bolt Hole Swivel Castor (Pressed Steel Frame) with a double ball race swivel head. The load capacity of this castor is 100kg using manual propulsion at 4km/hThis castor is fitted with a grey rubber tyre that will not mark or damage the floor and is ideal for most general, light duty castor purposes such as trolley castors or dolly castors. The Ball Bearing in the wheel provides excellent rolling performance. Single Bolt Hole castors can have a expander tube fitting (purchased separately) attached to insert into hollow square or round tubing. See our section on Expander Tube Fittings - Out of Stock - On the Way
- In Stock
50mm Footmaster Levelling Castor, Plate Fitting, 280kg Capacity | Nylon Wheel (KGD-60F)
£30.4350mm Foot Master Levelling Castor with an ivory co... Read Moreloured powder coating finish. This product has a 4-hole top plate with 58mm x 58mm bolt hole centres which is also powder coated for added protection. The wheel is made from premium quality black Nylon with a 25mm Tread width and the Die Cast Aluminium Foot Pad has a rubber vibration damping pad. This foot pad has a Nylon Hand-wheel operationThis product's load capacity has increased to 280kg Static Load and 140kg Dynamic Load.Because of the lifting and lowering function of the Foot Master castor, like all Jacking Castors, it is important understand that each castor may be subjected to HALF THE TOTAL WEIGHT. Therefore, the recommended load capacity for each Foot Master Levelling Castor is half the castor's Static Load Capacity, that is, when the castors' levelling function is not being used. The load capacity of the Footmaster Castor when it is being moved and positioned is given by the Dynamic Load Capacity.This levelling castor is a multi-functional swivel castor that provides mobility, levelling and anti-vibration functions. This allows users to move and position large equipment into place with added stability using the levelling and anti-vibration features. - In Stock
75mm AGV Swivel Castor, 100kg Capacity | Polyurethane Wheel, Ball bearing (GAPL75ASFHUD)
£56.7975mm Automate... Read Mored Guided Vehicle (AGV) Castor has a bracket made from strong pressed steel with precision ball bearings in the swivel head for smooth swivelling action and durability. The load capacity of this castor is 100kg
The bolt holes are slotted to 78mm x 45mm / 72mm x 45mm with a 9mm hole diameter,
This castors is fitted a Polyurethane tyre (Shore A 90) on an Aluminium centre containing ball bearings, The polyurethane wheel has excellent elasticity the minimises slipping that can happen when an AGV starts or stops. In addition, the elasticity also absorbs small shocks arising from small imperfections in the floor. The wheel itself is non marking and will not damage the floor.
Many AGV applications require the castor to run 24 hours a day and the durability of the castor is important to reduce costs associated with stoppage. By using bearing steel with a higher strength than general steel in the swivel head, this castor has an exceptional performance.
- In Stock
125mm Swivel Castor, 200kg Capacity | Rubber Tyre Wheel, Roller Bearing (MSV125RN1B)
£12.68125mm Top Plate Swivel Castor (Pressed Steel) with... Read More 80x60 Hole Centres. Rubber Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 200kg - In Stock
75mm Swivel Castor, 170kg Capacity | Cast Iron Wheel, Plain Bore (361CI)
£11.4075mm Top Plate Swivel Castor (Flexello 61 Serie... Read Mores) with 80x60mm Hole Centres. Cast Iron Wheel with Plain Bore. Load Capacity = 170kg
The Flexello 61 Series is an established industry standard range of Pressed Steel Castors that is suitable for most industrial castor uses. This range has a ball bearing swivel head and finished with a bright zinc plating.
- Out of Stock - On the Way
50mm Swivel Castor, 60kg Capacity | Nylon Wheel, Plain Bore (2KS050NYPL)
£5.8550mm Twin Wheel Top Plate Swivel Castor (Pressed S... Read Moreteel) with 38.5/48x38.5/48mm Fixing Bolt Holes. Nylon Wheel with Plain Bore. Load Capacity = 60kg