- Sorry, this product cannot be purchased.

Braked Castors
Braked Castors are sometimes referred to as lockable castors and it is usually swivel castors that have brakes. The Brake can lock either the wheel (Wheel Brake), the swivel head (Directional Lock), or both simultaneously (Total Stop or Swivel & Wheel Brake). It is un...common to find a fixed castor with a brake. Our GD Series of shock absorbing castors is one of the few that do. See GDS Shock Absorbing Castors here.Braked Castors can swivel the wheel 360 degrees about the vertical axis. They consist of a housing with a lockable brake and a caster wheel. The housing itself is made up of a plate fitting, swivel bearings and a yoke. The Yoke is often referred to as the castor’s frame or bracket.
The plate fitting determines how the castor is going to be attached to the equipment. It is usually either a single bolt hole fitting or a plate fixing which is generally square, rectangular or triangular. Plate fittings are usually bolted to equipment so knowing your required bolt hole centres is important. The Swivel Head consists of a ball race and a number of ball bearings that roll within it. Braked Castors, like Swivel Castors, can either have a single ball race or a double ball race. They perform the same function. The double ball race was developed for medium and heavy applications. This is because they are compact, perform well under static and dynamic loads and provide excellent steerability.
Braked Castor Offset
The Braked Castor’s offset it the distance from the swivel axis to the centre of the wheel (where it is secured to the castor frame). It is the reason any swivelling castor will go in the direction you want it to go regardless its starting direction. Read More
- Display 15 Products per page
-
In Stock
80mm Stainless Steel Swivel and Brake Castor (Plate), Polyurethane Tyre wheel, Roller Bearing, 150kg (IBPN08014030)
80mm Top Plate Swivel Stainless Steel Castor (Flex... Read Moreello Brand) with Swivel and Wheel Brake. This castor has a 105x85mm top plate with 80x60mm fixing bolt hole centres. The caster wheel has a Polyurethane Tyre on a Nylon Centre with a stainless steel roller bearing. The wheel's tread width is 30mm and the load capacity is 150kg using manual propulsion at 4km/h. -
In Stock
60mm Swivel and Brake Castor, 120kg Capacity | Nylon Wheel, Plain Bore (MSVH060NY0BSWB)
60mm Single Bolt Hole Swivel Castor to suit 12m... Read Morem bolt. This castor comes with a Swivel and Wheel Brake that locks both the wheel and the swivel head. The castor bracket is made from pressed steel and houses a solid nylon Wheel with a plain bore (without a bearing).
This castor's load capacity is rated to 120kg using manual propulsion at 4km/h making it a great castor choice for most applications that require a small castor.
This single bolt hole castor can be fitted with an expander fitting and requires a ACZ500 bolt hole reducer to reduce the 12mm bolt hole to 10mm for the expander fittings bolt that is 10mm.
-
In Stock
125mm Stainless Steel Swivel Castor With Brake, 150kg Capacity | Nylon Wheel, Plain Bore (MSS125NYBR)
125mm Top Plate Swivel Castor With Brake (Stainles... Read Mores Steel Castor) with 80x60mm Hole Centres. Nylon Wheel with Plain Bore. Load Capacity = 150kg -
In Stock
200mm Swivel Castor with Brake, 600kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (KBMG200PCB)
200mm Top Plate Swivel Castor with Brake (Fabricat... Read Moreed Steel) with 105x80mm Bolt Hole Centres. Polyurethane Tyre / Cast Iron Centre Wheel with Ball Bearing. Load Capacity = 600kg -
In Stock
50mm Shock Absorbing Fixed & Brake Castor, 40kg Capacity | Polyurethane Tyre Wheel (GDS050B65RF)
50mm Shock absorbing Fixed Castor with a Brake. Th... Read Moree top plate measures 55x55mm with 42x42mm fixing bolt holes centres to suit 6mm fixing bolts. The wheel as a soft (Shore 80A) polyurethane tyre for high elasticity and is fitted with a precision ball bearing. This castor has as load capacity of 40kg. The brake locks the wheel only allowing the swivel head to rotate freely when applied. The Top Plate is made from pressed steel and the frame is aluminium. The parts have powder coated and zinc plated for protection The shock absorbing functions means that the overall height can vary by 10mm. The castor's height without load is 100mm and this reduces incrementally by up to 10mm as the load increases providing up t0 10mm of compression for a fine shock absorbing function. -
Out of Stock - On the Way
125mm Swivel Castor with Brake, 200kg Capacity | Rubber Tyre Wheel, Roller Bearing (DBRN12511030)
125mm Top Plate Swivel Castor And Swivel & Whe... Read Moreel Brake (Pressed Steel) With 80X60mm Hole Centres. Blue Rubber Tyre / Nylon Centre Wheel With Roller Bearing. Load Capacity = 200Kg -
In Stock
75mm Swivel and Brake Castor, 70kg Capacity | Polypropylene Wheel, Plain Bore (LSV075PPBHBR)
This castor c... Read Moreomes with a 75mm White Polypropylene Wheel on a nylon centre fitted into a 10mm Single Bolt Hole Swivel Castor with a brake (Pressed Steel Frame). The load capacity of this castor is 70kg using manual propulsion at 4km/h
This castor is fitted with a white polypropylene wheel that will not mark or damage concrete floors and is ideal for most general castor purposes such as trolley castors or dolly castors. Single Bolt Hole castors can have a expander tube fitting (purchased separately) attached to insert into hollow square or round tubing. See our section on Expander Tube Fittings
-
In Stock
150mm Swivel Castor with Brake, 500kg Capacity | Polyurethane Tyre wheel, Roller Bearing (622PNBTSB)
150mm Top Plate Swivel Castor with Swivel &... Read More; Wheel Brake (Flexello) and 105x80mm Hole Centres. Polyurethane Tyre on a White Nylon Centre Wheel with Roller Bearing. Load Capacity = 500kg -
In Stock
75mm Swivel Castor with Brake, 90kg Capacity | Rubber Tyre Wheel, Plain Bore (361RNBR)
75mm Top Plate Swivel Castor with Footbrake (Flexe... Read Morello 61 Series) with 80x60mm Bolt Hole Centres. This castor is fitted with a Blue Elastic Rubber Tyre wheel on a Nylon Centre Wheel with a Plain Bore. Load Capacity = 90kg The Flexello 61 Series is an established industry standard range of Pressed Steel Castors that is suitable for most industrial or domestic applications. This range has a single ball bearing swivel head and finished with a bright zinc plating. -
In Stock
125mm Swivel and Brake Castor, 150kg Capacity | Rubber Tyre Wheel, Roller Bearing (MSVH125RN1BSWB)
125mm Single Bolt Hole (12mm) Swivel Castor with S... Read Morewivel and Wheel Brake (Pressed Steel). Blue Rubber Tyre on a Nylon Centre Wheel with Roller Bearing. Load Capacity = 150kg -
In Stock
100mm Swivel Castor with Brake, 125kg Capacity | Polypropylene Wheel, Plain Bore (LSV100PPBR)
100mm Top Plate Swivel and Brake Castor with White... Read More Polypropylene Wheel. It has 80x60mm fixing bolt hole centres and the load capacity of this castor is 125kg using manual propulsion at 4km/h This is one of our most popular castors and the White Polypropylene wheel is non-marking and won't damage concrete floors. Because it is a hard tread it has the lowest rolling and swivelling resistance. It is ideal as a new component or a replacement caster for most general purpose domestic or industrial castor where the travel speed of the castor generally does not exceed walking speed. -
In Stock
125mm Swivel Castor with Brake, 200kg Capacity | Rubber Tyre Wheel, Roller Bearing (MSV125RN1BSWB)
125mm Top Plate Swivel Castor with Swivel & Wheel ... Read MoreBrake (Pressed Steel) with 80x60 Hole Centres. Rubber Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 200kg -
In Stock
150mm Swivel Castor with Brake, 2200kg Capacity | Nylon Wheel, Ball bearing (GXT150BSFMCD)
150mm Machine... Read More Cast Nylon Wheel fitted into an extra strong Fabricated Top Plate Swivel Castor with wheel brake and 148/132x111/99mm bolt hole centres. The slotted bolt holes cover the European and UK standard 140x105mm bolt holes. The load capacity of this castor is 2200kg at 4km/h
This high performance castor is fitted with a white machine cast nylon wheel that will not mark the floor. An extra strong welded castor frame that is powder coated and fitted with a high performance castor wheel containing two ball bearings that turns on a specially designed integrated axle shaft arrangement makes this castor one of the most durable in the market. Perfect for moving very heavy loads where strength, durability and performance are critical
The swivel head of the 125mm - 250mm sizes of the GXT range come with a thrust bearing and a taper roller bearing in the swivel head.