- Sorry, this product cannot be purchased.
Accessories and Fittings
- Display 15 Products per page
-
In StockRetaining Washer 25.4mm (1 Inch) (1″STARLOCKWASHER)
£1.7225.4mm (1 Inch) Domed (capped) Wheel Retaining Was... Read Moreher suitable for attaching wheels to a 1 Inch axle . -
In StockExpander Fitting, Round Tube, 24mm to 27mm (WR0724/27)
£3.19Round Expander Fitting to suit round tube with int... Read Moreernal diameter from 24mm to 27mm. 10mm bolt included. If fitting through a 12mm single bolt hole castor, please purchase ACZ500 to reduce the Bolt Hole to 10mm. -
In StockSteel Wheel Tube: 12mm OD x 8mm ID x 41mm Length (TUBE2802900)
£1.17Steel wheel tube to reduce a 12mm bore to 8.5mm bo... Read Morere to suit an M8 Bolt. This steel tube has a 12mm Outside Diameter x 8.5mm Inside Diameter and 41mm Long to suit a wheel with a 12mm bore and 40mm hub length. -
In StockM10 x 30mm High Tensile Steel Bolt, Nut & Washer Set (BOLTSETM10X30)
£2.024 pack of M10 x 30mm High Tensile Steel Bolt, Nut ... Read More(nyloc), and Washer sets to fix your castors to your equipment. Nyloc Nuts contain a nylon insert that grips onto the bolt and prevents the nut from loosening due to the vibration that occurs when the castor wheel is moving. The pack contains:- (Qty 4) M10 x 30mm Threaded Bolts Grade 8.8 Hex Set finished in Bright Zinc Plate (BZP).
- (Qty 4) M10 Nylon Insert (Nyloc) Nuts (11.5mm Height) with BZP finish.
- (Qty 4) M10 Washers (20mm outside diameter, 10.5mm inside diameter, 2.2mm thick) with BZP finish.
-
In Stock
Expander Fitting, Round Tube, 31mm to 35mm (WR0731/35)
£6.02Round Expander Fitting to suit round tube with int... Read Moreernal diameter from 31mm to 35mm. 10mm bolt included. If fitting through a 12mm single bolt hole castor, please purchase ACZ500 to reduce the Bolt Hole to 10mm. -
In StockExpander Fitting, Square Tube, 27mm to 30mm (WR4727/30)
£4.07Square Expander Fitting to suit square tube with i... Read Morenternal diameter from 27mm to 30mm. 10mm bolt included. If fitting through a 12mm single bolt hole castor, please purchase ACZ500 to reduce the Bolt Hole to 10mm. -
In StockHeaded Spacer 15mm x 10mm x 2mm (sold in pairs) (2XKHSA)
£3.09A set of two machined steel top hat headed spacers... Read More to fit that fit into 15mm ball bearings to reduce the bearing bore to 10mm. The diameter of the top hat section is 20mm which has a 2mm thick shoulder that increases the wheel's hub length (the distance through the central bore) by 2mm each side of the wheel (4mm total increase to the hub length). The total length of the product is 15mm.
-
In Stock
Expander Fitting, Round Tube, 21.5mm to 24mm (WR0721.5/24)
£3.19Round Expander Fitting to suit round tube with int... Read Moreernal diameter from 21.5mm to 24mm. 10mm bolt included. If fitting through a 12mm single bolt hole castor, please purchase ACZ500 to reduce the Bolt Hole to 10mm. -
In StockHeaded Spacer 20mm x 12mm x 1.5mm (sold in pairs) (2XKHSE)
£3.46A set of two machined steel top hat headed spacers... Read More to fit that fit into 20mm ball bearings to reduce the bearing bore to 12mm. The diameter of the top hat section is 25mm which has a 1.5mm thick shoulder that increases the wheel's hub length (the distance through the central bore) by 1.5mm each side of the wheel (3mm total increase to the hub length). The total length of the product is 18mm.
-
In Stock
Expander Fitting, Square Tube, 36mm to 40mm (WR4736/40)
£7.21Square Expander Fitting to suit square tube with i... Read Morenternal diameter from 36mm to 40mm. 10mm bolt included. If fitting through a 12mm single bolt hole castor, please purchase ACZ500 to reduce the Bolt Hole to 10mm. -
In Stock6304-Z Sealed Ball Bearing 20mm x 52mm x 15mm (6304Z)
£4.01Ball Bearings with an inside diameter of 20mm, an ... Read Moreoutside diameter of 52mm, and a width of 15mm. The metal seals on the ball bearing protect the ball bearings from dirt ingress and also helps with lubricant retention. -
In Stock6204-2RS Dual Rubber Sealed Ball Bearing 20mm x 47mm x 14mm (62042RS)
£2.89The
Key Features:
- Double Rubber Seals (2RS): Provides enhanced sealing for better protection in harsh environments.
- Standard Dimensions:
- Inner Diameter: 20mm
- Outer Diameter: 47mm
- Width: 14mm
-
In Stock12mm | 10mm Bolt Hole reducer Fitting (ACZ500)
£0.54Required for 12mm Single Bolt hole castors to redu... Read Morece the bolt hole size to 10mm to suit the Tube Expander Fittings which come with 10mm bolts. -
In StockDirectional Lock for Revvo H Series Castors (9999-0181)
Original price was: £22.01.£20.64Current price is: £20.64. Sale!Retro-fit Directional Lock for the H Series Swivel... Read More Castor (4-Way Directional Lock). Converts any Revvo H Series 'swivel only' castor into fixed for straight line travel. Insert the fixing bolt through both the directional lock bolt holes and the castors bolt holes when fitting to equipment. Because of this, it in effect, shortens your bolt length by 4mm (the thickness of the D-lock). PLEASE NOTE: This product should not be used with castor with a foot because the brake makes contact with the Directional Lock and affects the swivel action. It can be used with a side mounted wheel lock.
-
In StockTeflon Wheel Tube: 12mm OD x 8.2mm ID x 42mm Length (TEFLONTUBE421282)
£3.27Teflon wheel tube to reduce a 12mm bore to 8.2mm b... Read Moreore. This tube has a 12mm Outside Diameter x 8.2mm Inside Diameter and 42mm Long to suit a wheel with a 12mm bore and 40mm hub length. This product has a stainless steel core with a Teflon coating. Suitable for high temperatures: -40 degrees to +280 Degrees Celsius
